Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2]   Go Down

Author Topic: wood filler advice sought  (Read 3079 times)

0 Members and 1 Guest are viewing this topic.

Gromit

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 588
Re: wood filler advice sought
« Reply #20 on: March 28, 2016, 06:38:53 PM »

Don't mean to be rude but you guys seem to have a thing about gap filling glues - all that's required here is to apply an ordinary wood glue into the split and clamp it - the visible surface of the repair has a finish on it so excess glue will just wipe off, the other surface will need a bit of care with a damp cloth to wipe it clean.
Mixing saw dust with glue is a bodge (a) it weakens the glue joint (b) the particles of endgrain in the sawdust together with the glue will be visible as a dark line which will stand out like a sore thumb. If any splinters have come off the surface then a small amount of filler can be used.
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: wood filler advice sought
« Reply #21 on: March 28, 2016, 06:45:24 PM »

My 2d worth.

If the split will clamp shut, I would before clamping use thin superglue which would enter the crack by capillary action then clamp it tight.
Pages: 1 [2]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal