Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: It never rains, but it pours!  (Read 3652 times)

0 Members and 1 Guest are viewing this topic.

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
It never rains, but it pours!
« on: March 28, 2016, 11:19:37 AM »

After making such a nice job of the axle etc. on my National Band job, my elation was soon flattened when, on putting it back together, one of the bass chords didn't sound! Well, it did make a sort of noise, but with great difficulty and it was offensive to the ear. I took the bass end off again.
The reeds aren't waxed in, they're glued and pinned! And what a mess, with a couple of trails of glue leading away, like cobwebs, to a large blob on the soundboard. The larger of the two plates had a visible gap half way along one side, no wonder it wouldn't sound. Thinking that it looked like the original glue which I'd seen on my other old thing too, I decided to try heat to remove it. My ancient "Remploy" electric soldering iron was soon removing the glue in a sort of ploughing movement, very good! Off came the first reedplate to reveal a nail sticking up in the middle of the chamber!!!!
After getting both reedplates off, I found that the top surface of the combined chamber was like the proverbial "Rocky road to Dublin"! I tried filing it flat, but I think it'll take too much wood off to be practical, so I'm contemplating building the level up with this modern Polyfilla stuff I've got, it can only be no good, after all.
When I was reading through the different subjects on here, when I first found the forum, I remember reading about stamps on reedplates, but never saw a stamp like the one on this bass plate, anyone recognise it?
If I can get the chamber top reasonably flat, I might try using some gasket stuff I got from Theo to seal in the plates with the old pins.In for a penny; in for a pound! 

 
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: It never rains, but it pours!
« Reply #1 on: March 28, 2016, 12:20:03 PM »

With such an uneven top surface to the reed chambers, I'd be inclined to dispense with any sort of filler, pins and gasket, and simply wax the reed plates in position. The wax is good at filling in gaps (up to a millimetre or so) and is a very quick method.

You will need the proper wax sticks from Charlie Marshall and a soldering iron with the tip filed to a narrow point. Ideally it should have a temperature control too, but it's possible to get by with switching on and off. if the wax goes brown and starts smoking, it's too hot.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: It never rains, but it pours!
« Reply #2 on: March 28, 2016, 12:50:42 PM »

Without doubt, you're very obviously right, Steve. However........... as you're aware, I have gained something of a reputation of being a bit of a skinflint, even though I'm not really, but economy needs always to be near the surface of my reasoning.

I don't have wax, I don't have a temperature controlled iron and neither have I the confidence to be sure of making a good job of the waxing! What I do have is some Polyfilla, a file, some sandpaper a bit of free time and a handful of muted enthusiasm.

But please don't imagine that I'm just ignoring your advice willy-nilly, I love to know how I should be doing it, even if I don't currently have the means to do so. Thanks for your input.
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

John MacKenzie (Cugiok)

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2360
  • Fettling... Learning to reed and right.
Re: It never rains, but it pours!
« Reply #3 on: March 28, 2016, 01:21:16 PM »

Polyfilla will shrink and crack.

SJ
Logged
There is no beginning to my talent :)



: Hohner Club Modell 1. Bb/Eb, de-clubbed : Early Hohner Pressed Wood A/D : 1930's Varnished wood G/C:  Hohner Erika C/F: Bandoneon tuned D/G Pressed wood: Koch F/Bb; G/C Pre Corso

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: It never rains, but it pours!
« Reply #4 on: March 28, 2016, 02:36:24 PM »

Without doubt, you're very obviously right, Steve. However........... as you're aware, I have gained something of a reputation of being a bit of a skinflint, even though I'm not really, but economy needs always to be near the surface of my reasoning.

I don't have wax, I don't have a temperature controlled iron and neither have I the confidence to be sure of making a good job of the waxing! What I do have is some Polyfilla, a file, some sandpaper a bit of free time and a handful of muted enthusiasm.

But please don't imagine that I'm just ignoring your advice willy-nilly, I love to know how I should be doing it, even if I don't currently have the means to do so. Thanks for your input.

PM sent.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: It never rains, but it pours!
« Reply #5 on: March 28, 2016, 02:51:23 PM »

I think it's worth trying the gasket material you got from.  If it leaks you can think again. 
The more permanent fix is to just replace the rectangular frames that firm the reed chambers.  They are very simply made from 4 strips of wood and glued in place.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: It never rains, but it pours!
« Reply #6 on: March 28, 2016, 04:17:21 PM »

OK boys, Polyfilla and even using current reed chamber is now out of the window. As well as the advice given on here, the other reason is that I've just discovered that the larger of the two bass reedplates is smaller than the hole it's supposed to cover! (See picture.) 

The trouble now is that most of my favourite tools are in Egypt. B****r, again!
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: It never rains, but it pours!
« Reply #7 on: March 28, 2016, 04:19:18 PM »

Glue a thin piece of wood (eg a lollipop stick) along one internal edge to narrow the chamber.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: It never rains, but it pours!
« Reply #8 on: March 28, 2016, 04:32:57 PM »

Glue a thin piece of wood (eg a lollipop stick) along one internal edge to narrow the chamber.

Two really useful sources of thin strip wood - lolly sticks as, Theo said, and coffee stirrers for thinner bits. Always have a stock in the workshop (helps to be chums with the local Costa girls :) )

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: It never rains, but it pours!
« Reply #9 on: March 30, 2016, 12:12:11 PM »

I use my sainted brother-in-law's bottomless stock of tools and sundries whilst I'm here in Windy Nook, not because I don't own the tools I need, but because they're nearly all in Egypt! He's out till later this afternoon, so I cannot get on with the National Band box until he gets back, so I thought I'd have a go at getting the decorative corner plates off the Viceroy, which has now been designated a "parts donor".
The corners have seen better days, but are more or less intact, just tarnished with a touch of surface corrosion. I remembered that my dear old mother has a small "Blitz" sonic jewellery cleaner and wondered if it might be of some help. The problem is, that there's hardly any of the liquid stuff left. Does anyone know what it is, and is there a readily available substitute? Or do I have to get the proper solution? I'd be grateful for any advice, thanks.
(It smells like the bubble blowing stuff we used to get as children.)
« Last Edit: March 30, 2016, 12:54:22 PM by Edward Jennings »
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

911377brian

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1518
Re: It never rains, but it pours!
« Reply #10 on: March 30, 2016, 12:38:43 PM »

If you're having trouble getting the corner plates off Edward, the advice I got from fellow melnetters was to apply a soldering iron to the nail head then gently prise the plates up. Works a treat.. ;
Logged

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: It never rains, but it pours!
« Reply #11 on: March 30, 2016, 12:46:44 PM »

I managed the first two, Brian, but they both pulled over the nail heads!!! I'll give the iron a go after lunch, thanks for the reminder.
I forgot about the logo on the bass reed. Anyone familiar with it yet?
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: It never rains, but it pours!
« Reply #12 on: March 30, 2016, 01:12:00 PM »

If you need to replace any of the done head nails I have loads spare.  They are almost exactly the same as the nails used on Hohner reed blocks.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: It never rains, but it pours!
« Reply #13 on: March 30, 2016, 01:20:17 PM »

I was contemplating using some small screws, I want to use them to decorate the box which I made for the International. If it's OK with you, I'll have a handful of them when I collect the International from you tomorrow.
It would seem that I'm (at last) "cooking on gas"!!! Thanks Theo.
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: It never rains, but it pours!
« Reply #14 on: March 31, 2016, 11:13:12 PM »

Well, it's back together! Part of the reason for me bidding on it on the first place was that I saw the plate on the end (2nd pic), and although the lettering was completely illegible due to a shaky photo, I was sure that it was a "Steel Reeds" plate. It was, I'm pleased to say.

But...........
Some of the reeds are quite slow to start, and whilst I'm sure there's a way to rectify this, I'm not too sure what it is. I expect it will be a case of trial and error, but does the reed tongue itself need to be closer (or even in) to the gap in the plate?
Mind you, I'm still rather pleased with it so far. Like me, it's a bit unkempt and scruffy looking; but it plays tunes.
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: It never rains, but it pours!
« Reply #15 on: April 14, 2016, 04:46:43 AM »

To get a good response you want the reed tip to stand away from the plate about equal its tip thickness. This is a rough measure but works well as a general rule.
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: It never rains, but it pours!
« Reply #16 on: April 14, 2016, 07:43:39 AM »

Thank you, Kimric, I'd just about given up on anyone answering this. I cannot get to the instrument for another 8 weeks or so, but I'll certainly have a go at that when I do.
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Sebastian

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1056
Re: It never rains, but it pours!
« Reply #17 on: April 14, 2016, 08:12:34 AM »

Sorry, didn't see this. You may want to take a look at harmonica fora. Among harmonica players and fettlers there is much discussion about the correct -- hm, in German it's called "Löseabstand". I have no idea of the English word. But it is the gab between the bent up reed tip and the plate, as mentioned by Kimric.
Logged

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: It never rains, but it pours!
« Reply #18 on: April 14, 2016, 08:26:24 AM »

Will do, thanks.
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

fishfeathersmacteeth

  • Member
  • *
  • Offline Offline
  • Posts: 28
Re: It never rains, but it pours!
« Reply #19 on: April 14, 2016, 09:56:43 AM »

Sorry, didn't see this. You may want to take a look at harmonica fora. Among harmonica players and fettlers there is much discussion about the correct -- hm, in German it's called "Löseabstand". I have no idea of the English word. But it is the gab between the bent up reed tip and the plate, as mentioned by Kimric.

I use the term "Gapping" in English, even though it's not my first language... but I think I might start using the term "Loseabstand" myself...it sounds exactly like what it describes in Scots..  8)
Logged
...been here and gone...All the way from Luthermuir..Fiddle player, Harmonica wheezer and Melodeon wrestler

B/C Double-Ray Black Dot; B/C Organola B/C 36 Bass; Frontini B/C; Casali B/C/C# 48 Bass; Hohner Club II C/F and a bit
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal