Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Bass springs - Hohner Erika  (Read 2604 times)

0 Members and 1 Guest are viewing this topic.

playandteach

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3526
  • Currently a music teacher in a high school.
Bass springs - Hohner Erika
« on: April 01, 2016, 10:55:37 AM »

Just got the Erika back from Theo who was doing the reeds (conversion to Bb/Eb), and initial reactions are way beyond expectations. Reversals I had done on the Serafini higher up don't quite match timbral qualities of surrounding notes, but work great on the Erika.
I'll upload some pictures and sound clips in the next few days.

However, the next task I feel is necessary to make it more playable is to weaken or replace the bass springs as they're too hard work - and I feel tension in places I don't want to get injuries.
1 Is this a straightforward job?
2 Are replacements readily available
3 Should I do anything else while I'm 'in there' - such as drilling out bass button holes for lining with felt?
Having had a look, could I bend or scratch thinner the springs in situ to weaken them a little or is that going to cause other problems?

I should also mention that my wife so far prefers the sound!
« Last Edit: April 01, 2016, 05:29:03 PM by playandteach »
Logged
Serafini R2D2 GC, Serafini GC accs 18 bass

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: Bass springs - Hohner Erika
« Reply #1 on: April 02, 2016, 06:51:17 AM »

You might try bending them, scratching or thinning the springs may cause them to break.
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Bass springs - Hohner Erika
« Reply #2 on: April 02, 2016, 09:32:33 AM »

Various thickness springs are available. The lightest I have are 0.50 mm, and I might have 0.45 too.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

playandteach

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3526
  • Currently a music teacher in a high school.
Re: Bass springs - Hohner Erika
« Reply #3 on: April 03, 2016, 07:50:57 PM »

Just dismantled things and taking time to bush bass holes at the same time - though made a bit of a pig's ear of reaming out the holes with whatever drill bits I had to hand - patched up ok now, but embarrassing.
Springs look like they might be 0.65 mm - Tried a couple of things with them - including trying to take out a rotation, but all too fiddly.
Much as it seems a long journey for such a small thing, I'm better off getting the 0.5mm ones.
All a good learning experience. Glad I didn't try tuning just yet.
Logged
Serafini R2D2 GC, Serafini GC accs 18 bass

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Bass springs - Hohner Erika
« Reply #4 on: April 03, 2016, 09:27:09 PM »

To enlarge holes nearly you either need a reamer, or a round file will also leave a neater finish than a drill.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: Bass springs - Hohner Erika
« Reply #5 on: April 03, 2016, 09:39:43 PM »

Would be interested in how you get on with the lighter springs. I find my Hohner bass buttons tiring, been wondering if it's the spring or just the layout. Tried bending a couple, without removing them, but only a marginal difference.
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

playandteach

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3526
  • Currently a music teacher in a high school.
Re: Bass springs - Hohner Erika
« Reply #6 on: April 03, 2016, 09:42:47 PM »

Yes, you're right - tried using a hand drill, thinking a slower speed would help. Not too bad now, but I should have used the right tools. So tempting to use what you already have.
Logged
Serafini R2D2 GC, Serafini GC accs 18 bass

playandteach

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3526
  • Currently a music teacher in a high school.
Re: Bass springs - Hohner Erika
« Reply #7 on: April 03, 2016, 09:44:35 PM »

Would be interested in how you get on with the lighter springs. I find my Hohner bass buttons tiring, been wondering if it's the spring or just the layout. Tried bending a couple, without removing them, but only a marginal difference.
Hoping it's the springs - having removed them they do appear to be mighty strong, and very resistant to bending. I'll let you know.
Logged
Serafini R2D2 GC, Serafini GC accs 18 bass

playandteach

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3526
  • Currently a music teacher in a high school.
Re: Bass springs - Hohner Erika
« Reply #8 on: April 08, 2016, 10:34:23 AM »

Well, springs now replace with 0.55 ish rather than 0.65 ish gauge. Can't say I can tell much difference. Still stiff - though a bit more predictable in their stiffness. I still think it is spring related as there is a very firm return of the pallets. However, it was worth rebushing the holes (using the correct felt this time - not just what I had to hand). Bass mech is now pretty quiet. I'll consider sourcing some lighter springs still CGM only had the 0.55 ones too.
Logged
Serafini R2D2 GC, Serafini GC accs 18 bass

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: Bass springs - Hohner Erika
« Reply #9 on: April 15, 2017, 09:44:45 PM »

Did you ever take this any further? Did you try 0.5mm springs?
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

diatonix

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 622
Re: Bass springs - Hohner Erika
« Reply #10 on: April 15, 2017, 10:08:37 PM »

You don't necessarily have to change springs. It's quite straightforward  to slightly lessen the angle of the existing ones. With  simple tools this can be easily and quickly achieved  without even having to dismantle the action.
Logged

playandteach

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3526
  • Currently a music teacher in a high school.
Re: Bass springs - Hohner Erika
« Reply #11 on: April 15, 2017, 11:49:02 PM »

That instrument was sold a few weeks ago, mainly because of the stiffness of the left hand. It ended up with someone who knows the issues and can either live with them or fix them better than I could. I did like the sound, the key, the tuning, and right hand response.
I had changed the springs, but to no avail. I even had some engineering teachers at school make some suggestions, but that would have entailed rebuilding the left hand end.
Now down to two boxes, but on the positive side, my daughter now has her flute headjoint and is starting to get a cracking sound from it (you think melodeons are expensive, look at flutes).
For what it's worth I did try bending springs and found it almost impossible to do in a controlled way. I am not a skilled technician.
Logged
Serafini R2D2 GC, Serafini GC accs 18 bass

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: Bass springs - Hohner Erika
« Reply #12 on: April 16, 2017, 08:01:22 PM »

I made up a very crude gauge to try to quantify things a little. Think someone did something similar a while back but can't find it:

Box                  Lightest  Heaviest       Button dia        Spring dia
Dino BP 11              200       260           15mm              -               Staggered
Post war 2915          320       380           12mm            0.7mm         Staggered
Post war "pre-Erica"  330*      380           9.5mm           0.7mm        Inset, flat
Erica (later grille)     380       420            -                    -               Inset, angled

activation weights in gms, not to be taken too literally.  " - " = didn't measure.

The Dino, which I find easiest, has both biggest buttons and lowest spring pressure.

*Some of the pre-Erica springs had been bent, and were around 270gm. Didn't feel I wanted to bend them further, and getting at the middle ones was very fiddly so only did a few.

The gauge was a small plastic soft drinks bottle with the bottom cut off, gradually filled with mixed small nuts/screws until the button fully grounded when applied, and then weighed on digital kitchen scale. A plastic foot was added to access middle buttons.
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

playandteach

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3526
  • Currently a music teacher in a high school.
Re: Bass springs - Hohner Erika
« Reply #13 on: April 16, 2017, 08:43:07 PM »

As far as I can tell on the Erika which as I say I no longer have, it is because the upright levers are way shorter than on the other boxes I have. I believe the spring tension couldn't be reduced too much further with out risking air leaks with slight bellows movement. Extending the levers would have meant increasing the volume of the left hand box. I also believe that there was nothing untoward about that box. Just a quirk of the model that I found made me not pick it up as much as I might otherwise have done. Great sound good right hand action. Others here may have more adroit engineering skills but our tech dept at school were examining it like a baby and agreed about the levers.
Logged
Serafini R2D2 GC, Serafini GC accs 18 bass

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: Bass springs - Hohner Erika
« Reply #14 on: April 16, 2017, 11:23:16 PM »

Quote
Think someone did something similar a while back but can't find it

In this thread maybe ? 

http://forum.melodeon.net/index.php/topic,20328.0.html
Logged

bellowpin

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 119
Re: Bass springs - Hohner Erika
« Reply #15 on: April 17, 2017, 12:43:59 PM »

As far as I can tell on the Erika which as I say I no longer have, it is because the upright levers are way shorter than on the other boxes I have. I believe the spring tension couldn't be reduced too much further with out risking air leaks with slight bellows movement. Extending the levers would have meant increasing the volume of the left hand box.  Others here may have more adroit engineering skills but our tech dept at school were examining it like a baby and agreed about the levers.


 I think that you have highlighted an area of design that as been overlooked for a long time.a lever is a simple mechanism ,that can give an "advantage ". but in this case it produces a mechanical disadvantage, ie hard work to press button.
    on the righthand side the length of the lever arms are about equal ,( button to pivot , pivot to pallet ).    with some experimentation on expensive boxes ,using longer levers to swing pallets in a wide arc,giving near vertical lift .this is intended to overcome muffled sound on the inner row .this type of mech usually involves a double lever/pivot.   more cost?
   could something based on the same idea be conceived for the base mech..   the lack of space limits actuating arm length.  while the pallet arm is longer.   the opposite situation ,if possible would make for easy button action. a double lever arrangement might work .or a complete rethink may be the answer.    any thoughts??
   as  an aside, the bass notes are usually played quickly and could have more spring pressure.   Chords are played longer and should have lighter spring pressure..  brian..
   
Logged
whole life in the shropshire hills. on the slow track and enjoying it.
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal