Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: Change in Outside Row Sound  (Read 5230 times)

0 Members and 1 Guest are viewing this topic.

John Cohen

  • Member
  • *
  • Offline Offline
  • Posts: 33
Change in Outside Row Sound
« on: April 08, 2016, 09:51:04 PM »

Since I got my new box (a red '50s Paolo Soprani tuned B/C) I've noticed something rattling about inside.  Today I pulled the pins out and took the front of the box off to remove whatever was loose inside.  It turned out to be a nut and washer that fell off the screw attaching one of the bellows straps.  I made sure not to touch anything else.  I put the thing back together and started to play again, but now my outside row sounds different than my inside row.  It has more treble and is a little buzzy sounding.  Any idea what I could have done wrong?
Logged

Anahata

  • This mind intentionally left blank
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6767
  • Oakwood D/G, C/F Club, 1-rows in C,D,G
    • Treewind Music
Re: Change in Outside Row Sound
« Reply #1 on: April 08, 2016, 09:58:00 PM »

It's common for the outer row to be brighter sounding because the pallet holes (where the sound comes out) for the outer row are nearer the front of the box and the open air.

What's odd is that you didn't notice it before.
Logged
Слава Україні !
Music recording and web hosting: www.treewind.co.uk
Mary Humphreys and Anahata: www.maryanahata.co.uk
Ceilidh band: www.barleycoteband.co.uk

John Cohen

  • Member
  • *
  • Offline Offline
  • Posts: 33
Re: Change in Outside Row Sound
« Reply #2 on: April 08, 2016, 10:09:35 PM »

It's weird for sure.  When I got the box I listened to see if there was a difference and if there was one, it was minor.  Now the outside row sounds brash, thin, and sort of buzzy and hissy.  It's noticeably louder.  The inside sounds a little muffled in comparison but has a clear, warm, flutey sound.  That's what I remember the outside row sounding like as well before I briefly had things apart.

The box has an aluminum grill like the earlier grey boxes, so it is vented better than a normal red box.  I know the plastic grills that originally came on these muted one row more than the other.
Logged

Pearse Rossa

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 723
Re: Change in Outside Row Sound
« Reply #3 on: April 08, 2016, 10:27:50 PM »

..  It has more treble and is a little buzzy sounding.  Any idea what I could have done wrong?

Are you positive that you did not disturb any valves?

.. I know the plastic grills that originally came on these..

Plastic grilles?
Logged

John Cohen

  • Member
  • *
  • Offline Offline
  • Posts: 33
Re: Change in Outside Row Sound
« Reply #4 on: April 08, 2016, 11:33:46 PM »

By plastic grills I mean the celluloid covered metal ones, not the bare aluminum.


I am not positive I didn't disturb any valves.  Where are the valves located, and what do they look like?  The accordion seems to play fine, it just sounds different. 
Logged

playandteach

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3526
  • Currently a music teacher in a high school.
Re: Change in Outside Row Sound
« Reply #5 on: April 08, 2016, 11:38:24 PM »

Is it possible that a reed block has shifted? This happened recently to me - don't know that I'd describe the result as tonally different, but definitely duff. Fortunately it was an easy fix.
Logged
Serafini R2D2 GC, Serafini GC accs 18 bass

Pearse Rossa

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 723
Re: Change in Outside Row Sound
« Reply #6 on: April 08, 2016, 11:52:57 PM »

By plastic grills I mean the celluloid covered metal ones, not the bare aluminum.
I see. That's what I thought.

I am not positive I didn't disturb any valves.  Where are the valves located, and what do they look like?  The accordion seems to play fine, it just sounds different. 

The reason I mentioned the valves is because of the buzzing sound you said you can hear.
Have a look at this photo.
Logged

John Cohen

  • Member
  • *
  • Offline Offline
  • Posts: 33
Re: Change in Outside Row Sound
« Reply #7 on: April 09, 2016, 12:09:53 AM »

I don't think I ever came in contact with the reeds or the valves.  Is there something I should look for to see if something is out of place?

It is possible I shifted the reed block.  How would I determine if this is the case, and how would I fix it?


I can best describe the change in sound as "nasally".  It sounds very dry, thin, and buzzy.  It definitely wasn't like this before... it's quite unpleasant to listen to, and before I removed the front this was my favorite sounding box.  I was playing it right before I opened it up to remove the loose bits, and it sounded normal.  I played it again immediately after removing the parts... ~5-7 minutes later, and it was off- I immediately could hear the difference. 
Logged

Pearse Rossa

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 723
Re: Change in Outside Row Sound
« Reply #8 on: April 09, 2016, 12:10:21 AM »

.. now my outside row sounds different than my inside row.  It has more treble and is a little buzzy sounding.

Is the buzzing sound coming from only a few notes or the whole row?
A twisted or defective valve can cause a buzz. The valves should lay flat but sometimes old leather valves might have curled.

Are you certain the metal grille is firmly screwed in?
There may be a vibration caused if it is loose.
Logged

John Cohen

  • Member
  • *
  • Offline Offline
  • Posts: 33
Re: Change in Outside Row Sound
« Reply #9 on: April 09, 2016, 12:16:43 AM »

I didn't remove the grill, just the body itself (it comes apart at the middle after you remove 4 pins).  the grill is firmly attached.

It seems like the entire row that sounds off, although a couple of notes may be even worse than the others.  That may just be my perception though.

I'll remove the body again and take a photo of the inside.
Logged

Pearse Rossa

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 723
Re: Change in Outside Row Sound
« Reply #10 on: April 09, 2016, 12:25:48 AM »


It is possible I shifted the reed block.  How would I determine if this is the case, and how would I fix it?

Look at this photo. The metal brackets to the left are holding the block secure and tight against the pallet board.
On your box , make sure those bracket screws are tight, but be careful not to over tighten them.
Logged

Pearse Rossa

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 723
Re: Change in Outside Row Sound
« Reply #12 on: April 09, 2016, 12:45:30 AM »

The blocks are not 'strapped'. I am surprised at that.
Someone has padded out the end of the blocks with tape.
They must have been loose.
Make sure there is no 'play' between the blocks and the pallet board and make sure they are properly aligned.

The valves look reasonable.
Logged

John Cohen

  • Member
  • *
  • Offline Offline
  • Posts: 33
Re: Change in Outside Row Sound
« Reply #13 on: April 09, 2016, 01:04:11 AM »

That red stuff isn't tape, it's red celluloid, the same color as the outside finish.  I think that work was done at the factory. 

Which part is the pallet board?
Logged

Pearse Rossa

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 723
Re: Change in Outside Row Sound
« Reply #14 on: April 09, 2016, 01:15:49 AM »

The tape is on the opposite end.
I would suggest that you read this previous discussion. You may find it useful.


Logged

John Cohen

  • Member
  • *
  • Offline Offline
  • Posts: 33
Re: Change in Outside Row Sound
« Reply #15 on: April 09, 2016, 01:23:37 AM »

Very interesting!  It does sound like there is no longer tremolo on the outside row.

I'll open it up again and see if it is moving around.... I live in Maryland- do you have any recommendations for a repair tech I can bring it to?  Is it OK to have straps added to an antique accordion?
Logged

deltasalmon

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1002
Re: Change in Outside Row Sound
« Reply #16 on: April 09, 2016, 01:30:22 AM »

How far are you from Philadelphia? I bring my boxes to Liberty Bellows in South Philly and think they do good work.
Logged
Sean McGinnis
Bordentown City, NJ, USA

John Cohen

  • Member
  • *
  • Offline Offline
  • Posts: 33
Re: Change in Outside Row Sound
« Reply #17 on: April 09, 2016, 01:32:43 AM »

Nothing is moving around in there... it's nice and solid.
Logged

John Cohen

  • Member
  • *
  • Offline Offline
  • Posts: 33
Re: Change in Outside Row Sound
« Reply #18 on: April 09, 2016, 01:41:33 AM »

So I put it back together again and tried it out... not much change, but for some reason my low reed played on two of my high notes even though I had it turned off.  I turned the low reed on and then turned it off again and those two notes played normally afterwards... weird.

The outside row is still nasally and thin.    It's like there is almost no tremolo.  The inside row is much wetter.
« Last Edit: April 09, 2016, 02:03:04 AM by John Cohen »
Logged

John Cohen

  • Member
  • *
  • Offline Offline
  • Posts: 33
Re: Change in Outside Row Sound
« Reply #19 on: April 09, 2016, 01:42:43 AM »

How far are you from Philadelphia? I bring my boxes to Liberty Bellows in South Philly and think they do good work.

I'm in Baltimore.  While it's close to Philly it can take an entire day to drive there and back with traffic. 
Logged
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal