Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Black Mold!!  (Read 2639 times)

0 Members and 1 Guest are viewing this topic.

Grape Ape

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1209
Black Mold!!
« on: April 14, 2016, 04:41:17 PM »

So a couple of months ago I bought an old Hohner Club II and despite the need for a complete overhaul (tuning, valves, felts and leathers etc etc) it is one of the most lovely boxes I have ever played.  The action is amazing, and the sound of the few notes that are in tune and on which the tremolo is on is amazing.  I love it and will send it off to be professionally restored when finances permit.  In the meantime, I can't stop playing it despite its many flaws. So imagine my shock when I opened the grill and found... (Cue horror suspense music)
FUZZY BLACK MOLD
So the question is simple and I have read threads on the subject before, but with the mold feel this might be an extreme case, and I am forced to assume it is probably inside the bellows and everywhere else, so what is the best way to clean and steralize the inyards so this foul nastiness does not return?

Previous threads have suggested mildly soapy water, but will this work in this case?

Also, for the bellows I believe it has also been suggested to use slightly warm slightly soapy damp not wet rag and then hang to dry.  The bellows are quite dirty but also quite beautiful and reasonably air tight and I do not want to ruin them.

Thoughts? Threads I can be directed to?
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Black Mold!!
« Reply #1 on: April 14, 2016, 04:46:47 PM »

I would avoid using anything wet.  Take it outside,  so you don't inhale the dust, then use a paintbrush to loosen up any surface deposit, then ideally blow out the dust with compressed air. Same for inside the bellows.  The mould can't do any further harm while it is dry. 
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

John MacKenzie (Cugiok)

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2360
  • Fettling... Learning to reed and right.
Re: Black Mold!!
« Reply #2 on: April 14, 2016, 04:49:28 PM »

Vinegar?  Vinegar is a very useful cleaning agent for all sorts of situations. There are proprietory mould removers on the market, buit there could be all sorts of nasty, harmful, "other" chemicals contained in the mix.
Mould usually means some degree of dampness, but what's it feeding on? Maybe old glue?
A good airing would seem to be needed.
Sir John

Apropos of Theo's post, when I say vinegar, I don't mean soak it, I meant a cloth, lightly moistened with it. Followed by that thorough airing. Just enough to clean but not to wet.
« Last Edit: April 14, 2016, 04:51:42 PM by John MacKenzie (Cugiok) »
Logged
There is no beginning to my talent :)



: Hohner Club Modell 1. Bb/Eb, de-clubbed : Early Hohner Pressed Wood A/D : 1930's Varnished wood G/C:  Hohner Erika C/F: Bandoneon tuned D/G Pressed wood: Koch F/Bb; G/C Pre Corso

Grape Ape

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1209
Re: Black Mold!!
« Reply #3 on: April 14, 2016, 05:07:22 PM »

And the outside of the bellows? As long as i am going to take the thing apart might as well give it a good cleaning.  They have 90 years of old dust between the folds.  I should add, Theo you are likely to be the one doing the restoring on this box despite having to ship it overseas to get it done.  I really want this box in the best of hands and there does seem to be some consensus on that matter.  I tell you it really is a special box and desrves to be more so.  The only snag is that I seem to have lost my job.  All should be alright and I think I have already lined something up, but it is hard to make financial commitments until everything is in stone.  Could you pm approximate quotes (maybe best/worst case kinda scenario ballpark figures) of what that might set me back?
Logged

Jack Campin

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 764
    • Jack Campin's Home Page
Re: Black Mold!!
« Reply #4 on: April 14, 2016, 06:59:53 PM »

Look up what Aspergillus and Stachybotrys fungi can do to you.

Rubber gloves, good dust mask, goggles.  Maybe start with a portable vacuum cleaner to remove the loosest stuff but make sure you don't get the contents of the bag all over yourself when emptying it.  Wash all your clothes with enzyme detergent when you're done.

You probably can't kill it without destroying the box, but keeping the box really dry should keep it from growing any more.

BTW Leviticus 14:34-48 was probably aimed at dealing with similar fungal infestations.  When the stuff has permeated a house, the ancient Hebrews had it right, and modern technology doesn't offer a better solution.
Logged
http://www.campin.me.uk/

I can't figure out how to quit but I will no longer check this group and have deleted all shortcuts to it.

vsku

  • Member
  • *
  • Offline Offline
  • Posts: 24
Re: Black Mold!!
« Reply #5 on: April 14, 2016, 07:29:21 PM »

In my opinion use compressed air to clean any loose dust. Then you need to get it dry. Its highly possiböe that the mold is in "deactive mode" if its not too moist conditions. I think that the mold has came from wtoring the box in an wet attic or cellar etc. You can try to kill the growth with some very mild disinfectant solution sprayed carefully and from good distance. But i think thats just over reacting..

Fungi needs food (usually just normal dust), moist and appropriate temperature to grow. Otherwise its in deactive mode.
Logged

Grape Ape

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1209
Re: Black Mold!!
« Reply #6 on: April 14, 2016, 07:46:59 PM »

The box is already bone dry, so it should be inactive.  We have nice sunny weather here today so should be a good day for it.  I think the mold must be old as there is no current sign of any recent dampness.
Logged

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: Black Mold!!
« Reply #7 on: April 14, 2016, 07:48:35 PM »

Definitely mould - not thick black dust?
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

911377brian

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1518
Re: Black Mold!!
« Reply #8 on: April 14, 2016, 08:34:06 PM »

I'm with Malcolm, bought a 1040 a couple of years ago and found thick soft black dust in the bellows..it vacuumed out very easily..
Logged

bellowpin

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 119
Re: Black Mold!!
« Reply #9 on: April 14, 2016, 09:22:52 PM »

  black mold!!........great name for a tune??.........or even a group..
Logged
whole life in the shropshire hills. on the slow track and enjoying it.

Grape Ape

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1209
Re: Black Mold!!
« Reply #10 on: April 14, 2016, 09:28:25 PM »

  black mold!!........great name for a tune??.........or even a group..

Metal Cover Versions of Bob Mould Songs? It could work
Logged

Jack Campin

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 764
    • Jack Campin's Home Page
Re: Black Mold!!
« Reply #11 on: April 14, 2016, 10:39:18 PM »

Quote
In my opinion use compressed air to clean any loose dust.

And blow it all over the house?  No thanks.
Logged
http://www.campin.me.uk/

I can't figure out how to quit but I will no longer check this group and have deleted all shortcuts to it.

melodeon

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1732
Re: Black Mold!!
« Reply #12 on: April 15, 2016, 01:00:50 AM »

Vacuum. ?
Logged

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: Black Mold!!
« Reply #13 on: April 15, 2016, 07:41:59 AM »

Theo's method is simplest and the way to go first. If it's dust, most of it will go with the brushing and then blow or vacuum.
If it's mould it is usually a lot more tenacious, although I've not met it in a box yet, and I would much rather get rid of outside than in the house or in a vacuum cleaner you have to empty.
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

mr hohner

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 189
  • K.BLAND Melodeons
Re: Black Mold!!
« Reply #14 on: April 15, 2016, 10:27:30 AM »

I've just got hold of a club II as well, I must say that for some reason I prefer it over my castagnari and the excelsior which I was lent a while back- truly lovely melodeons
 8)
Logged
Castagnari Studio D/G, Serenelli D/G, Hohner Pokerwork D/G, Castagnari Lilly D/G , Sandpiper Dublin II G/C, Serenelli Silyvia G/Acc

Broadland Boy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1243
  • Awful noises from Pokerwork, HA114G, BbEb Liliputs
Re: Black Mold!!
« Reply #15 on: April 16, 2016, 12:46:57 AM »

Unless it has a HEPA filter (and possibly even if it has?) mould spores are likely to go straight though many vacuum cleaners and blow around the room. Outside is a good idea.

Still GA, it might be worse, it could be dried Marmite - just waiting for some damp to re animate  >:E

Good job its a Hohner otherwise dry rot might also be a risk ;)

OK I've got me coat...........
Logged
Richard A
Venit ventus contrarius ventus egrediente,
Omnes prope quid ventum est circa

Malcolm Clapp

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1119
  • Loving my Hohner-reeded wet MMM CastaTommy
Re: Black Mold!!
« Reply #16 on: April 16, 2016, 03:06:28 AM »


Good job its a Hohner otherwise dry rot might also be a risk ;)


Rot? Meine Lieblingsfarbe....
Logged
Tuner/repairer, now retired.

Grape Ape

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1209
Re: Black Mold!!
« Reply #17 on: April 18, 2016, 01:15:54 PM »

Well wasn't as pervasive as I'd feared.  Whether twas dust or mold we may never know, but compressed air and a paintbrush seemed to do the trick.  The paintbrush also worked wonders on the outside of the bellows which look much cleaner. Now one to the box's real problems...
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal