Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: Valves 101. Very Basic questions  (Read 4819 times)

0 Members and 1 Guest are viewing this topic.

Grape Ape

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1209
Valves 101. Very Basic questions
« on: April 17, 2016, 11:18:13 PM »

What exactly do the leather valves on the reeds do?
How do they work?
When they have curled and need to be replaced how does it affect the sound/ playabilty of that note?
Why is it that many notes sound fine even if the valve has curled up?
Is it as easy to replace them as it looks like it would be?

Sorry for these very freshman questions, but I just don't quite understand.
Logged

melodeon

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1732
Re: Valves 101. Very Basic questions
« Reply #1 on: April 18, 2016, 12:18:01 AM »

The simple answer is.. they close to shut off air

Speaking only of one button.

Assuming the bellows are stretched out a bit.

Press one button and push on the bellows. The valve will close off the reed in that pair for that button.

Pull the bellows and the other valve  shuts the air off to the other reed in that pair.

Hence one reed sounds at a time.
Logged

Grape Ape

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1209
Re: Valves 101. Very Basic questions
« Reply #2 on: April 18, 2016, 12:47:24 AM »

While that is kind of what I thought, it tails to explain why the higher end reeds don't have them, and how and even if it affects the sound of a reed when faulty.  The reason I ask, is that all of the valves look curled on an old honer I have.  Some notes sound fine, others do not. 
Logged

Grape Ape

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1209
Re: Valves 101. Very Basic questions
« Reply #3 on: April 18, 2016, 12:53:40 AM »

I guess maybe I'm not looking for the simple answer, but a thorough understanding of what is going on and how they function.  Basically, as I understand it, each button plays two notes and therefore when pulling the box open it sucks the valve shut that is for the note that plays on the same button when pushing the bellows closed? And if so, and the function is so that only one of the two notes plays, why don't both notes sound simultaneously on the higher reeds without valves or even those where the valve is clearly compromised?  Is it more about the melodeon being airtight? Or is this where raspy, "snare drum like sounds come from? What is the effect?
Logged

Malcolm Clapp

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1119
  • Loving my Hohner-reeded wet MMM CastaTommy
Re: Valves 101. Very Basic questions
« Reply #4 on: April 18, 2016, 06:32:16 AM »

A valve does not prevent one of the reeds in the pair from sounding; the bellows direction alone does that on a conventionally reeded instrument***.

What it does do is to prevent air from being wasted through the slot of the non-playing reed.

If no valves at all were fitted, then all but the very lowest reeds would still sound, but twice as much air would be utilised and the resultant sound would be weak, slow to respond, and a wee bit sharp of pitch.

On the very highest reeds, because of their small size, the amount of air wasted through the non-playing reed is so very tiny, so valves are usually considered unnecessary.

If a valve is curled, one of two things will happen. Either the valve will not close because of the excessive distance it has to travel, or it will bounce against the reedplate, causing a vibration akin to breaking wind. (I tend to think of the snare drum effect as being caused by loose reedplates.)

Replacing the valves is simple on the side of the reedplates you can see. However, the opposing valve really needs to be replace with the reedplate removed from the reedblock to ensure accuracy of length and positioning. It can however be done with a forehead torch and a pair of tweezers, but from my experience frustration and failure rate is high, and only to be used if you seriously need to avoid re-waxing.

(***For the purposes of this post, I have ignored reference to recently (?) reported experiments with two way reeds.)



Logged
Tuner/repairer, now retired.

Anahata

  • This mind intentionally left blank
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6767
  • Oakwood D/G, C/F Club, 1-rows in C,D,G
    • Treewind Music
Re: Valves 101. Very Basic questions
« Reply #5 on: April 18, 2016, 08:44:56 AM »

On the very highest reeds, because of their small size, the amount of air wasted through the non-playing reed is so very tiny, so valves are usually considered unnecessary.

Small observation on a correct (as far as I know) and detailed answer: higher pitched reeds can actually be adversely affected by valves, so they become slow or unwilling to start vibrating. It's a useful coincidence that omitting the valves for high reeds doesn't waste enough air to matter much.
Logged
Слава Україні !
Music recording and web hosting: www.treewind.co.uk
Mary Humphreys and Anahata: www.maryanahata.co.uk
Ceilidh band: www.barleycoteband.co.uk

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Valves 101. Very Basic questions
« Reply #6 on: April 18, 2016, 08:54:25 AM »

Not a coincidence Anahata. It is because the higher reeds need to have some air wasted to reduce the tendency of the reed to choke when played hard.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Malcolm Clapp

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1119
  • Loving my Hohner-reeded wet MMM CastaTommy
Re: Valves 101. Very Basic questions
« Reply #7 on: April 18, 2016, 11:39:13 AM »

Depends a little on the quality of the reeds too, but the OP does say that his post was concerning an old Hohner, so fair comment, Theo.
Logged
Tuner/repairer, now retired.

melodeon

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1732
Re: Valves 101. Very Basic questions
« Reply #8 on: April 18, 2016, 01:55:18 PM »


In part the basis of my comment.

From Carlin Music:

".... valves that regulate which reed gets the air to play. The are two reeds on each metal reed block, one for when you open (draw air in) the bellows & one for when you close (push air out). They are usually called "leathers" but new ones are plastic.

"They may or may not affect the sound, but you will be using a lot more air to play than normal because the reed not playing will leak - very inefficient."


The last line of my previous post may be only in part correct, it is possible for the other reed to sound.. but considering direction of air flow.. may not.
Efficiency is the key element.
What is likely possible is that tone /sound may be compromised.

Thanks for the clarification Malcolm.



« Last Edit: April 18, 2016, 02:50:58 PM by melodeon »
Logged

tom f

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 112
Re: Valves 101. Very Basic questions
« Reply #9 on: April 18, 2016, 05:17:50 PM »

Hi Grape,
If you want to understand more about what goes on inside your melodeon you will learn a lot from a website called 'accordion revival', written by one of your countrymen.  He also publishes a book called 'The Accordion Owners Manual' which is packed with useful stuff including a section on basic fault finding and repairs.  Certainly worth a look.
Logged

Grape Ape

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1209
Re: Valves 101. Very Basic questions
« Reply #10 on: April 18, 2016, 05:23:55 PM »

Thanks Tom, I have asked about a good book for minor repairs etc. in the past and got crickets.  I will check it out....
Logged

Pearse Rossa

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 723
Re: Valves 101. Very Basic questions
« Reply #11 on: April 18, 2016, 10:58:57 PM »

....... I have ignored reference to recently (?) reported experiments with two way reeds.)

What's that about?
Logged

Malcolm Clapp

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1119
  • Loving my Hohner-reeded wet MMM CastaTommy
Re: Valves 101. Very Basic questions
« Reply #12 on: April 18, 2016, 11:54:22 PM »

....... I have ignored reference to recently (?) reported experiments with two way reeds.)

What's that about?

I'm sure I've seen a thread on this site regarding bi-directional reeds, Pearse, but can't find it in a search.

http://www.concertina.net/forums/index.php?showtopic=17418 might be of interest.

Logged
Tuner/repairer, now retired.

Anahata

  • This mind intentionally left blank
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6767
  • Oakwood D/G, C/F Club, 1-rows in C,D,G
    • Treewind Music
Re: Valves 101. Very Basic questions
« Reply #13 on: April 19, 2016, 11:11:07 AM »

There was sub-thread was about whether the frequency of the note produced from any free reed in general was equal to or double the frequency of reed vibration. It was suggested that a reversible reed, which swung clear of the slot equally both ways, would give a double frequency tone.

I seem to recall they were mentioned in connection with the Chinese Sheng, though I can't think why that would be relevant as the Sheng is mouth-blown and therefore never has to deal with air going the other way.
Logged
Слава Україні !
Music recording and web hosting: www.treewind.co.uk
Mary Humphreys and Anahata: www.maryanahata.co.uk
Ceilidh band: www.barleycoteband.co.uk

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: Valves 101. Very Basic questions
« Reply #14 on: April 19, 2016, 07:08:37 PM »

Quote
I seem to recall they were mentioned in connection with the Chinese Sheng, though I can't think why that would be relevant as the Sheng is mouth-blown and therefore never has to deal with air going the other way.

Dunno, it seems to be played more like an harmonica.  According to Wikipédia:

Quote
The sheng is played by alternately blowing and inhaling, and a player can produce a continuous sound without pause. The traditional performance style is to sound two or three notes at the same time by adding a fifth and/or octave above the main melody note. When a higher note is not available, a lower note a fourth below the main melody note can be played instead.
Logged

Pearse Rossa

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 723
Logged

Pearse Rossa

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 723
Re: Valves 101. Very Basic questions
« Reply #16 on: April 19, 2016, 09:52:50 PM »

........ you will learn a lot from a website called 'accordion revival',...

It certainly is a very good website, full of useful information that applies equally to melodeons.
He uses the term 'valves' when talking about pallets (sometimes). Keep that in mind.

Accordion Revival.
Logged

JimmyM

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 103
Re: Valves 101. Very Basic questions
« Reply #17 on: April 19, 2016, 09:55:09 PM »

This has been very informative. I previously thought the valves were to stop the reed sounding but now know otherwise.

So, would I be right in assuming that if I have a note that sounds but without the same volume as other notes, when the button is pressed that its the 'opposite' valve that is allowing some air to escape through it, instead of allowing all the air to flow through my desired note?



Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Valves 101. Very Basic questions
« Reply #18 on: April 19, 2016, 10:07:48 PM »

It could be but it is only one of several possible explanations.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Grape Ape

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1209
Re: Valves 101. Very Basic questions
« Reply #19 on: April 19, 2016, 10:20:23 PM »

This has been very informative for me as well.  And I thought it was a stupid question. 

Anyway, I have decided I want to try my hand at replacing leathers.  I have read some of the threads on doing it, and think I have the skill and patience to pull it off.  I will try first on an old presswood I have.

My first questions are, if there is a reed that is probably loose (makes a rattling sound when played). Should the loose reed be fixed before replacing valves or does it matter?  Also, if reeds needed to be tuned, is that something that should be done before replacing valves?  Also, I have read many responses as to best type of glue, has there ever been a consensus reached?  And lastly, does anyone know where I can buy a set of leathers for an A/D presswood? And lastly lastly, would it be better to use synthetic ones (do they last longer, etc) and where could one purchase thise if yes?
Logged
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal