Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2]   Go Down

Author Topic: Valves 101. Very Basic questions  (Read 4847 times)

0 Members and 1 Guest are viewing this topic.

JimmyM

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 103
Re: Valves 101. Very Basic questions
« Reply #20 on: April 19, 2016, 10:26:03 PM »

It could be but it is only one of several possible explanations.

I was hoping it was the only explanation :-) but thanks.
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Valves 101. Very Basic questions
« Reply #21 on: April 19, 2016, 11:32:25 PM »

My first questions are, if there is a reed that is probably loose (makes a rattling sound when played). Should the loose reed be fixed before replacing valves or does it matter? 
If you have a reed that is loose it would IMO be suggestive that rewaxing all the reeds would be a worthwhile task. But as you are wishing to replace all the valves you will have to take the reeds off the blocks to replace the inside valves so kit is a moot point. Replacing the inside valves without removing the reeds is very difficult and fraught with failure and therefore IMO not even worth trying.

Quote
Also, if reeds needed to be tuned, is that something that should be done before replacing valves? 
After, as the replacement valves will almost certainly change the tuning.

Quote
Also, I have read many responses as to best type of glue, has there ever been a consensus reached?
I use EvoStik contact adhesive.

Quote
And lastly, does anyone know where I can buy a set of leathers for an A/D presswood?
Charlie Marshall

Quote
And lastly lastly, would it be better to use synthetic ones (do they last longer, etc) and where could one purchase thise if yes?
I use almost entirely vinyl valves, from Charlie

Grape Ape

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1209
Re: Valves 101. Very Basic questions
« Reply #22 on: April 20, 2016, 02:29:44 AM »

Thanks Lester!  Very thorough answers, now to read up on rewaxing reeds which seems like a much harder job.

So do I understand you correctly that if you are going to replace valves it is pretty much necessary to remove and rewax all the reed plates even if it only sounds like one is loose?
« Last Edit: April 20, 2016, 02:33:02 AM by Grape Ape »
Logged

Anahata

  • This mind intentionally left blank
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6767
  • Oakwood D/G, C/F Club, 1-rows in C,D,G
    • Treewind Music
Re: Valves 101. Very Basic questions
« Reply #23 on: April 20, 2016, 07:32:32 AM »

Dunno, it seems to be played more like an harmonica.  According to Wikipédia:

Quote
The sheng is played by alternately blowing and inhaling

Ah, I didn't know that. So my recollection of the sheng having reversible reeds might have been correct, after all.
Logged
Слава Україні !
Music recording and web hosting: www.treewind.co.uk
Mary Humphreys and Anahata: www.maryanahata.co.uk
Ceilidh band: www.barleycoteband.co.uk

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Valves 101. Very Basic questions
« Reply #24 on: April 20, 2016, 07:35:06 AM »

Yes because as Lester said you have to replace the valves on the hidden side of the reed too.
I also use vinyl valves and fund them reliable, but on they can be noisy on larger reeds.  I always use leather on the lowest three or four reed plates on each treble block.  There are vileda valves which are supposed to be a synthetic substitute for leather, but I don't like them and never fit them.  Their only advantage over leather is they are cheap.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: Valves 101. Very Basic questions
« Reply #25 on: April 20, 2016, 09:21:44 AM »

If you have curly leather valves then the wax is likely to be past its "best by" date anyway.
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Valves 101. Very Basic questions
« Reply #26 on: April 21, 2016, 08:03:50 AM »

If you have a loose reed it doesn't actually mean you have to rewax everything. You could refix The offending reed using a soldering iron to melt the wax, or if the wax is too dried out, just refix that one reed (obviously you'll need some wax for that). A complete overhaul is a biggish job if you've not done it before, and you may start to question why you started it when you are halfway through, or when some of the reeds aren't working properly once you've completed the re-wax. If everything goes to plan it'll just soak up a lot of your time. But you'll certainly hit one or two snags, and also likely need to do some tuning as well. Just so that you are aware...

And what Theo says below...
« Last Edit: April 21, 2016, 08:45:29 AM by RogerThomas »
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Valves 101. Very Basic questions
« Reply #27 on: April 21, 2016, 08:21:14 AM »

Replacing the odd list or damaged valve is quick and easy. But if you have a full set to replace its a lengthy job that requires some new skills if you've not done it before. Ideally you need to retune as well. 
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning
Pages: 1 [2]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal