Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Bushing cloth supplier?  (Read 2246 times)

0 Members and 1 Guest are viewing this topic.

Andy Next Tune

  • aka Andy Wooles
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1127
  • Melodeon with Accidentals? Make a PI Claim!!!
    • www.shavethedonkey.co.uk
Bushing cloth supplier?
« on: May 02, 2016, 05:53:27 PM »

Material for bushing bass buttons appears to be the one thing Charlie Marshall doesn't stock.
Any suggestions for a local (UK) supplier?
Logged
Andy, from the now ex-County Palatine of Cheshire

Caring for a European community of melodeons from France, Italy, Germany, Wales and Suffolk!

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Bushing cloth supplier?
« Reply #1 on: May 02, 2016, 06:09:02 PM »

I get it from Fletcher and Newman, piano parts suppliers.  They call it bushing cloth and it comes in several thickness.  The thickest one is about 1.4mm which I use on bass buttons.  They may not be able to supply a suitably small quantity for you, but they do sell mixed bags off off cuts of leather and felt which usually include some bushing felt.  There may be a piano repairer near you who could supply you with a small amount.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Bushing cloth supplier?
« Reply #2 on: May 02, 2016, 06:11:28 PM »

I would recommend using concertina bushing 'felt'. It has a close weave which is especially durable; also it's not too thick.

Best source is Mark Lloyd-Adey, but he has been unwell recently and his website is in the process of being updated. Nevertheless there is a phone contact number listed, so it's worth giving him a call:
http://concertina-spares.com

Or you could try Dave Elliott in Oughtibridge (north Sheffield), certainly a very able and competent concertina repairman, but I'm not sure if he would sell materials like bushing felt. Worth a try though...
http://www.concertina-repair.org.uk
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Bushing cloth supplier?
« Reply #3 on: May 02, 2016, 06:47:14 PM »

Concertina bushing felt is exactly the same material as piano bushing cloth.  In concertinas one usually uses the thinnest grade which is .85mm.  This works fine with Italian buttons which have a felt washer under the mushroom head.  With Hohner mushroom buttons I think you get a better result with the thickest felt.  You can leave about 1mm standing proud so that the button has a soft stop without needing a washer.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

playandteach

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3526
  • Currently a music teacher in a high school.
Re: Bushing cloth supplier?
« Reply #4 on: May 02, 2016, 08:47:56 PM »

Theo recommended I take out the ordinary felt from my attempt and use the proper stuff. Dead easy and works a treat.
I would also avoid my mistake of using a drill bit to enlarge the holes. Reamers are cheap enough on ebay - I've bought a couple for the next time.
Logged
Serafini R2D2 GC, Serafini GC accs 18 bass

Andy Next Tune

  • aka Andy Wooles
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1127
  • Melodeon with Accidentals? Make a PI Claim!!!
    • www.shavethedonkey.co.uk
Re: Bushing cloth supplier?
« Reply #5 on: May 04, 2016, 09:28:39 PM »

Thanks all.

Mark Llloyd-Adey replied - piece 6"x2" £3+£2pp

Apparently that's enough for a concertina so should be plenty for 8 bass buttons!
Logged
Andy, from the now ex-County Palatine of Cheshire

Caring for a European community of melodeons from France, Italy, Germany, Wales and Suffolk!

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Bushing cloth supplier?
« Reply #6 on: May 04, 2016, 09:46:11 PM »

Thanks all.

Mark Llloyd-Adey replied - piece 6"x2" £3+£2pp

Apparently that's enough for a concertina so should be plenty for 8 bass buttons!

Cut it on the bias (diagonally across the piece).

I get mine from Concertina Spares who sell it in trapezoids to force you to do this  (:)

playandteach

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3526
  • Currently a music teacher in a high school.
Re: Bushing cloth supplier?
« Reply #7 on: May 04, 2016, 10:08:21 PM »

Theo recommended a rotary cutter.
Logged
Serafini R2D2 GC, Serafini GC accs 18 bass

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Bushing cloth supplier?
« Reply #8 on: May 04, 2016, 10:09:22 PM »

Theo recommended a rotary cutter.

Scalpel man myself but there again I don't own a rotary cutter  (:)

melodeon

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1732
Re: Bushing cloth supplier?
« Reply #9 on: May 04, 2016, 11:08:58 PM »

Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal