Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: One-row keyboard springs  (Read 2612 times)

0 Members and 1 Guest are viewing this topic.

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
One-row keyboard springs
« on: May 03, 2016, 03:52:57 PM »

I'm making a one-row box, loosely patterned after older Cajun (German really) models.  For the keyboard, these usually had torsion/scissor springs behind the keys.  However I notice modern boxes often use small coil springs hooked on small nails at the base of the keys instead.  Is this a better design or just for more convenient spring replacement ?
Logged

triskel

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3290
Re: One-row keyboard springs
« Reply #1 on: May 03, 2016, 05:01:11 PM »

... I notice modern boxes often use small coil springs hooked on small nails at the base of the keys instead.  Is this a better design or just for more convenient spring replacement ?

Probably many of the modern makers aren't even aware of this, but coil springs are a feature you'll sometimes see on the great, original, old boxes that were made by International Accordion in Germany, who built Monarch, Sterling, Globe, Mezon etc. But they mounted the coil springs externally, hooking them around the base of the brass lever arm at one end and onto a bent brass rod "rail" at the other.

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: One-row keyboard springs
« Reply #2 on: May 03, 2016, 05:47:48 PM »

I'm making a one-row box, loosely patterned after older Cajun (German really) models.  For the keyboard, these usually had torsion/scissor springs behind the keys.  However I notice modern boxes often use small coil springs hooked on small nails at the base of the keys instead.  Is this a better design or just for more convenient spring replacement ?
Coil springs are very unlikely to ever fail - they just don't get sufficiently stressed to anywhere near their failure point.
Torsion springs occasionally fail: Hohner springs were notorious for failure for a while shortly after production was moved to China. Improved quality control mostly remedied this defect, but the odd breakage does sometimes happen.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: One-row keyboard springs
« Reply #3 on: May 03, 2016, 07:10:15 PM »

Quote
Probably many of the modern makers aren't even aware of this, but coil springs are a feature you'll sometimes see on the great, original, old boxes that were made by International Accordion in Germany, who built Monarch, Sterling, Globe, Mezon etc. But they mounted the coil springs externally, hooking them around the base of the brass lever arm at one end and onto a bent brass rod "rail" at the other.

Like this one ??

https://www.youtube.com/watch?v=bRsBhYA1R8U
Logged

blafleur

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 530
Re: One-row keyboard springs
« Reply #4 on: May 03, 2016, 07:20:55 PM »

I think the coil springs are also easier to install, replace, and adjust, at least in that style of construction.

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: One-row keyboard springs
« Reply #5 on: May 04, 2016, 07:49:10 AM »

You could also try the setup that Scandalli used on their piano accordions, it has a spring under the heel where the rod bends in an L between the keyboard and the valve. (I should just post a picture)
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997

blafleur

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 530
Re: One-row keyboard springs
« Reply #6 on: May 04, 2016, 01:17:07 PM »

(I should just post a picture)

Please?

melodeon

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1732
Re: One-row keyboard springs
« Reply #7 on: May 04, 2016, 02:50:31 PM »

I don't care for the feel or noise or look of a coil spring.. particularly those found on some Cajun made units where they are secured with a  nail.

I have never broken a "hairpin" spring on any of my 25 plus Hohners nor 14 Castagnaris.
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: One-row keyboard springs
« Reply #8 on: May 04, 2016, 04:15:35 PM »

I have never broken a "hairpin" spring on any of my 25 plus Hohners nor 14 Castagnaris.

You've never lived  (:)

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: One-row keyboard springs
« Reply #9 on: May 04, 2016, 06:38:38 PM »

Speaking of pictures, here are 2.

The first is of an almost new keyboard on which I had just replaced a coil spring.  Some of the springs are stretched near the lower nail.  Is that the adjustment technique you meant, Brian ?

The other shows scissor springs in and out of an old Eagle Brand.  Again, I was replacing a broken spring !

I have limited experience and thought I would ask to see if there is general agreement for one type over the other.  I appreciate your comments and opinions (all valid in my book) and hope more will come.  So if something springs to mind...  ;D


 
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal