Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: Concertone single row Melodeon What year and where to find replacement reeds  (Read 5287 times)

0 Members and 1 Guest are viewing this topic.

Ted Kelly

  • Member
  • *
  • Offline Offline
  • Posts: 5

Just found and love this!  Concertone (steel Reeds)  I understand from this forum Montgomery Ward sold this brand.. Would appreciate thoughts on years this model was sold and where to get replacement reeds... also how to play it...!  much appreciated.  Very informative group!
Logged

Henry Piper

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 368

Hi There !.
As I understand it "Concertone" was a stencil brand (one of many) used by Hohner in the  early days of that company. Many of these re-branded instruments, which were made in their thousands in klingenthal and nearby towns in Saxony, in the former G.D.R. were as you correctly guess sold by mail order catalogue companies.
I doubt that you will find replacement reeds any where for this box, -they are likely to be on a long brass or zinc plate rather like mouth organ reeds are nowadays, rather than each reed on its own individual plate and if you intend  to restore this box you will need to work with what's in there !!.
Having said that ,it is possible to restore these old boxes to a playable condition, but it would involve quite a lot of work, ....very interesting as a technical exercise, but ultimately never as effective as restoring better quality boxes,...... no doubt others with more knowledge on here will come along and advise you, this is definitely the place to get advice about all things diatonic.
Logged
From Ottery St Mary Devon. Currently Playing Dino Baffetti BP2 in D/G, Hohner Student 1 P.A conversion  in D/G,  Hohner 3515 Pre-Pokerwork in A/D,   2 row "Beaver Brand" in Bb/Eb, Hohner Pre- Erica in G/C .  Single row permanent 4 voice, 4 bass in C from old Hohner single row and bits of a cheap Cajun box !!,

Ted Kelly

  • Member
  • *
  • Offline Offline
  • Posts: 5

Thank Henry Piper . Very informative. Any idea on dating this little box?
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place

How bad are the reeds?   You would only need replacements if there are broken reed tongues. 
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Ted Kelly

  • Member
  • *
  • Offline Offline
  • Posts: 5

Actually it appears to be just the steel pieces that are missing and have the holes covered in masking tape
Logged

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........

So the reeds are all present (if not necessarily entirely correct!) and you're just missing two pallets? I would think there'll be a few of those lurking in someone's scrapbox stock of vintage spares. If you post the dimensions on here I reckon someone will have a couple that'll fit. I didn't notice in the photo whether the pallet arms are still in place - easy enough to fabricate if you need but can't find replacements. Best of luck.

Graham

Just looked again - the arms are still in place, so you're just on the lookout for a couple of pallets. Again, not too difficult to make replacements, as long as you don't want them to look as old as the rest of the box.
« Last Edit: May 10, 2016, 05:57:53 PM by GPS »
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

Ted Kelly

  • Member
  • *
  • Offline Offline
  • Posts: 5

Thanks GPS will get the dimensions. Much appreciated.  Anyone know the rough age of the concertome as pictured in my oroginal post?
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place

Boxes like that were made for many decades, from the late 19th century until well after WW2.  There are no serial numbers and no factory records as far as I know. 
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

911377brian

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1518

I've just re papered and taped the bellows of a Saxony box that looks very like yours, Ted. I re felted the pallets as well. Sadly, it's all fur coat and no knickers, looks lovely but leaks like a strainer, worse in fact than when I got it as I can't get the pallets to seal. Perhaps the leather and felt stuff I got from Charlie Marshall is too thick..I can't say I wasn't warned of the folly of the enterprise by some wise heads of this parish but thought I could carry it off if I tried hard enough. Just thought I'd let you know... :'(
Logged

Ted Kelly

  • Member
  • *
  • Offline Offline
  • Posts: 5

Thanks theo and Bob for detail
Logged

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.

But I'd bet you enjoyed the experience, frustration and ultimate disappointment, Brian. It must all be a recognisable progression of the dreaded disease, eh? I'm not far behind you in the development, I fear.
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

triskel

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3290

As I understand it "Concertone" was a stencil brand (one of many) used by Hohner in the  early days of that company. Many of these re-branded instruments, which were made in their thousands in klingenthal and nearby towns in Saxony, in the former G.D.R. were as you correctly guess sold by mail order catalogue companies.

It's the other way around really and "Concertone" was a Montgomery Ward house brand, not a Hohner one.

Various factories produced them for Montgomery Ward over the years, and some may have been in Klingenthal, but Hohner have always been a long way from there, in Trossingen, and only started to make Concertone accordions at the end of the 1920s when they took over their neighbouring rivals Koch, who had been building them prior to that.

However, this one looks like it may be a 1920's instrument by A. Pitzschler & Sohn in Altenburg, who did make some of their melodeons with individual steel reeds.

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping

I've just re papered and taped the bellows of a Saxony box that looks very like yours, Ted. I re felted the pallets as well. Sadly, it's all fur coat and no knickers, looks lovely but leaks like a strainer, worse in fact than when I got it as I can't get the pallets to seal. Perhaps the leather and felt stuff I got from Charlie Marshall is too thick..I can't say I wasn't warned of the folly of the enterprise by some wise heads of this parish but thought I could carry it off if I tried hard enough. Just thought I'd let you know... :'(

Not sure if you followed this procedure, but if you are refacing the pallets, it's always best to remove the pallets from the pallet lever arms before fixing the new facing in place. Then lay the pallets on the fondo-sound-boardy-thing held in place by the spring action of the lever arms. When you are happy that they are all lined up and covering the vent holes, you can then glue the pallets on to the arms in situ. That ought to obviate the risk of any air leaks. 
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama

Not sure if you followed this procedure, but if you are refacing the pallets, it's always best to remove the pallets from the pallet lever arms before fixing the new facing in place. Then lay the pallets on the fondo-sound-boardy-thing held in place by the spring action of the lever arms. When you are happy that they are all lined up and covering the vent holes, you can then glue the pallets on to the arms in situ. That ought to obviate the risk of any air leaks.

All fine and well but this is on a one row with pallets nailed to the levers  ;)

Henry Piper

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 368

As I understand it "Concertone" was a stencil brand (one of many) used by Hohner in the  early days of that company. Many of these re-branded instruments, which were made in their thousands in klingenthal and nearby towns in Saxony, in the former G.D.R. were as you correctly guess sold by mail order catalogue companies.

It's the other way around really and "Concertone" was a Montgomery Ward house brand, not a Hohner one.

Various factories produced them for Montgomery Ward over the years, and some may have been in Klingenthal, but Hohner have always been a long way from there, in Trossingen, and only started to make Concertone accordions at the end of the 1920s when they took over their neighbouring rivals Koch, who had been building them prior to that.

However, this one looks like it may be by a 1920's instrument by A. Pitzschler & Sohn ("Universal Accordion") in Altenburg, who did make some of their melodeons with individual steel reeds.

More than happy to be corrected Sir !! Having seen other Hohner built boxes badged "Concertone", I assumed this was the same.
 I do realise that Hohner's were based in Trossingen, rather than Klingenthal,  but what I was trying to say was that boxes like this one were  mass produced, by various manufacturers  and sold under many names !!.
« Last Edit: May 10, 2016, 06:12:59 PM by Henry Piper »
Logged
From Ottery St Mary Devon. Currently Playing Dino Baffetti BP2 in D/G, Hohner Student 1 P.A conversion  in D/G,  Hohner 3515 Pre-Pokerwork in A/D,   2 row "Beaver Brand" in Bb/Eb, Hohner Pre- Erica in G/C .  Single row permanent 4 voice, 4 bass in C from old Hohner single row and bits of a cheap Cajun box !!,

911377brian

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1518

Ah! You remember,Lester! Perhaps I could glue the arms on to the pallets after removing the nails...anyway I've drifted the thread unintentionally  and will now graciously retire...
Logged

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping

Not sure if you followed this procedure, but if you are refacing the pallets, it's always best to remove the pallets from the pallet lever arms before fixing the new facing in place. Then lay the pallets on the fondo-sound-boardy-thing held in place by the spring action of the lever arms. When you are happy that they are all lined up and covering the vent holes, you can then glue the pallets on to the arms in situ. That ought to obviate the risk of any air leaks.

All fine and well but this is on a one row with pallets nailed to the levers  ;)

Ahhhh......  :|bl

Ah! You remember,Lester! Perhaps I could glue the arms on to the pallets after removing the nails...

Yes - that ought to work.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Psuggmog Volbenz

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 318
    • musical whimsy

[quote author=triskel....

However, this one looks like it may be by a 1920's instrument by A. Pitzschler & Sohn ("Universal Accordion") in Altenburg, who did make some of their melodeons with individual steel reeds.
[/quote]
I have looked at several Pitzschler boxes and I own one with steel individual reeds. All the ones that I have seen have the pallets attached with round head slotted screws rather than nails. I also have a four stop one row Concertone with individual steel reeds as well. It has nailed on pallets and doesen't appear to be Pitzschler made, but possibly a Koch made.
Logged
I'm squeezin' and they're wheezin': old junker boxes

911377brian

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1518

Thanks for the help Steve, removed nails and carried out your procedure and it has solved the problem, tight as a tick now... (:)
Logged

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping

Thanks for the help Steve, removed nails and carried out your procedure and it has solved the problem, tight as a tick now... (:)

Jolly good  (:)
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal