Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: HA-114 Treble Spring Info  (Read 923 times)

0 Members and 1 Guest are viewing this topic.

Johnniez

  • Good talker
  • **
  • Offline Offline
  • Posts: 51
HA-114 Treble Spring Info
« on: May 10, 2016, 09:21:44 PM »

Hi all

Well I broke a treble spring and in the middle of trying to fix it. .

The following is the treble assembly. You will see the springs and they have an angle set into them .. That's the pic with the buttons.

Also there is two photos.. One is dark. CGM says that is the proper spring for my box.. The other photo with the shiny spring is the one that came out of the box with the bit of an angle on it. 

So what do I do.
Do I put/try to put that angle on the spring.. ??
if not now what.??? need a bit of help here.
No prob getting it apart nor to put together but not sure about the differences with the springs.

tnx
Johnnie


« Last Edit: May 10, 2016, 09:25:35 PM by Johnniez »
Logged
Every Day Is A Great Day
Some Are Better Than Others

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: HA-114 Treble Spring Info
« Reply #1 on: May 10, 2016, 09:37:33 PM »

The bend in the spring has been added in order to adjust the spring pressure.  It might be a home made spring. Original Hohner springs don't look so shiny.  Just fit the spring as it is.  You might need to bend it if it feels too strong or too weak.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Johnniez

  • Good talker
  • **
  • Offline Offline
  • Posts: 51
Re: HA-114 Treble Spring Info
« Reply #2 on: May 10, 2016, 11:19:21 PM »

The bend in the spring has been added in order to adjust the spring pressure.  It might be a home made spring. Original Hohner springs don't look so shiny.  Just fit the spring as it is.  You might need to bend it if it feels too strong or too weak.

Thanks Theo.

Anyhow I got them in.. but not back in box  I need a brake. Neck is killin me so will go at it again tomorrow.. They feel quite even on my board. So I took them off and ready to go back in the box.  Just re-screw assembly to the box then hook up springs. I will get better feel playing... 

So wish me luck.. Might get through it ok, maybe.. Touch wood !! as they Say.

Tnx again Theo

Johnnie
« Last Edit: May 10, 2016, 11:23:15 PM by Johnniez »
Logged
Every Day Is A Great Day
Some Are Better Than Others
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal