Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: C5/Bb4 reeds  (Read 1215 times)

0 Members and 1 Guest are viewing this topic.

Tone Dumb Greg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4955
    • Dartmoor Border Morris
C5/Bb4 reeds
« on: May 11, 2016, 01:45:55 PM »

Anyone know where I can get a pair of C5/Bb4 Italian reeds? Charlie doesn't have them.
Logged
Greg Smith
DG/GC Pokerwork, DG 2.4 Saltarelle, pre-war CF Hohner, Hohner 1040 Vienna style, old  BbEb Hohner that needs a lot of work.

ACCORDION, n. An instrument in harmony with the sentiments of an assassin. Ambrose Bierce

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: C5/Bb4 reeds
« Reply #1 on: May 11, 2016, 02:50:55 PM »

May not be much help but I bet Charlie has B4/C5 reeds which are easily tip loadable on the B to get Bb

Tone Dumb Greg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4955
    • Dartmoor Border Morris
Re: C5/Bb4 reeds
« Reply #2 on: May 11, 2016, 02:57:40 PM »

May not be much help but I bet Charlie has B4/C5 reeds which are easily tip loadable on the B to get Bb

Yes, that's what he offered. I wasn't sure how easy it is to tip solder a reed.
Logged
Greg Smith
DG/GC Pokerwork, DG 2.4 Saltarelle, pre-war CF Hohner, Hohner 1040 Vienna style, old  BbEb Hohner that needs a lot of work.

ACCORDION, n. An instrument in harmony with the sentiments of an assassin. Ambrose Bierce

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: C5/Bb4 reeds
« Reply #3 on: May 11, 2016, 03:05:38 PM »

I use standard electronics solder from Maplins and a 25W iron. Clean the reed tip with abrasive paper and slip a support under the reed, then apply a small amount of solder. Then clean any solder resin of and check the tuning, I always go too flat and then file up to pitch. Don't use your best tuning file as it will clog up and take care as the solder is much easier to remove so the tuning changes far faster than when you are filing a reed itself.

Tone Dumb Greg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4955
    • Dartmoor Border Morris
Re: C5/Bb4 reeds
« Reply #4 on: May 11, 2016, 03:24:52 PM »

I use standard electronics solder from Maplins and a 25W iron. Clean the reed tip with abrasive paper and slip a support under the reed, then apply a small amount of solder. Then clean any solder resin of and check the tuning, I always go too flat and then file up to pitch. Don't use your best tuning file as it will clog up and take care as the solder is much easier to remove so the tuning changes far faster than when you are filing a reed itself.
Advice taken. Order placed. Thanks Lester.
Logged
Greg Smith
DG/GC Pokerwork, DG 2.4 Saltarelle, pre-war CF Hohner, Hohner 1040 Vienna style, old  BbEb Hohner that needs a lot of work.

ACCORDION, n. An instrument in harmony with the sentiments of an assassin. Ambrose Bierce
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal