Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Removing Erica Bass Mechanism  (Read 1089 times)

0 Members and 1 Guest are viewing this topic.

Henry Piper

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 368
Removing Erica Bass Mechanism
« on: May 13, 2016, 11:53:12 AM »

Simple question, ( I think !! )   Is it possible to remove the Bass mechanism from an Erica, without removing the buttons,???   I am currently trying, and It just doesn't seem to want to come out easily, and I don't wish to risk possibly bending the pallet arm thingy's !!
Many Thanks.
Logged
From Ottery St Mary Devon. Currently Playing Dino Baffetti BP2 in D/G, Hohner Student 1 P.A conversion  in D/G,  Hohner 3515 Pre-Pokerwork in A/D,   2 row "Beaver Brand" in Bb/Eb, Hohner Pre- Erica in G/C .  Single row permanent 4 voice, 4 bass in C from old Hohner single row and bits of a cheap Cajun box !!,

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Removing Erica Bass Mechanism
« Reply #1 on: May 13, 2016, 11:58:22 AM »

Yes.
First release all the springs,
Second remove the screws holding the mechanism down.
Then with some wrangling it is possible to remove the buttons and get the whole thing out.  It is tight though.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Henry Piper

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 368
Re: Removing Erica Bass Mechanism
« Reply #2 on: May 13, 2016, 12:02:26 PM »

Many thanks Theo. I forgot about releasing the springs !!! obvious really.
Logged
From Ottery St Mary Devon. Currently Playing Dino Baffetti BP2 in D/G, Hohner Student 1 P.A conversion  in D/G,  Hohner 3515 Pre-Pokerwork in A/D,   2 row "Beaver Brand" in Bb/Eb, Hohner Pre- Erica in G/C .  Single row permanent 4 voice, 4 bass in C from old Hohner single row and bits of a cheap Cajun box !!,

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Removing Erica Bass Mechanism
« Reply #3 on: May 13, 2016, 12:15:27 PM »

Important to do that before removing the screws.  If you have already removed the screws you may have torn out some wood from the screw holes.  In that case you may need to plug the holes before replacing the screws.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Henry Piper

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 368
Re: Removing Erica Bass Mechanism
« Reply #4 on: May 13, 2016, 12:23:33 PM »

All safely done Theo no problems, .....Its so easy when you know what your doing !!!  I will check screw holes when I replace, and plug if necessary.
Logged
From Ottery St Mary Devon. Currently Playing Dino Baffetti BP2 in D/G, Hohner Student 1 P.A conversion  in D/G,  Hohner 3515 Pre-Pokerwork in A/D,   2 row "Beaver Brand" in Bb/Eb, Hohner Pre- Erica in G/C .  Single row permanent 4 voice, 4 bass in C from old Hohner single row and bits of a cheap Cajun box !!,
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal