Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Info wanted from Dino Baffetti Carnival 3 or ART 85 owners  (Read 2901 times)

0 Members and 1 Guest are viewing this topic.

Malcolm Clapp

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1119
  • Loving my Hohner-reeded wet MMM CastaTommy

I have an Excelsiola 3 voice with a smashed grill. I understand that Excelsior are no longer making this model.

I have several options; fret a new grill, attempt a jigsaw puzzle, or find another supplier. While the latter option would probably be the more costly, it might be the most simple.

So, if any one has a Carnival 3/ART85 Dino Baffetti, can you please measure the grille for me, and post here or PM me. Hopefully it may be the same size as needed for the Excelsiola and I can then order one from Baffetti.

Yes, I know I could ring Genuino B direct, but he may not be happy that I'm looking for a Baffetti part to repair an instrument from a competitor.   :-[

Thanks in anticipation....

(Admin: not sure if this is the best category for this post; please feel free to move it.)





Logged
Tuner/repairer, now retired.

guallit

  • Member
  • *
  • Offline Offline
  • Posts: 8
Re: Info wanted from Dino Baffetti Carnival 3 or ART 85 owners
« Reply #1 on: May 18, 2016, 11:12:03 AM »

you can call Genuino Baffetti,he is a gentleman.no problem,you can tell him my name..italo gualandris .i am sure he try to resolve your problem  ciao
Logged

Malcolm Clapp

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1119
  • Loving my Hohner-reeded wet MMM CastaTommy
Re: Info wanted from Dino Baffetti Carnival 3 or ART 85 owners
« Reply #2 on: May 20, 2016, 06:20:41 AM »

Hmmm. It appears that the current carnival range from Dino Baffetti now have the name Dino Baffetti worked into the fretting, so there goes that idea.

Looks like the "jigsaw puzzle" approach is my next step....and if that fails, then I need to find some one with CNC abilities perhaps???

Or no grill at all  >:E
Logged
Tuner/repairer, now retired.

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Info wanted from Dino Baffetti Carnival 3 or ART 85 owners
« Reply #3 on: May 20, 2016, 07:55:16 AM »

You don't need CNC.  A simple fretsaw is quite capable of cutting a grill.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Info wanted from Dino Baffetti Carnival 3 or ART 85 owners
« Reply #4 on: May 20, 2016, 08:59:35 AM »

You don't need CNC.  A simple fretsaw is quite capable of cutting a grill.

Absolutely; a powered fretsaw makes the job quicker and less tiring, but I have done it by hand. Takes a while and it's frankly not a very interesting job, but certainly do-able.

Graham
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

Malcolm Clapp

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1119
  • Loving my Hohner-reeded wet MMM CastaTommy
Re: Info wanted from Dino Baffetti Carnival 3 or ART 85 owners
« Reply #5 on: May 20, 2016, 11:21:41 AM »

Thanks for your advice. I might have a go, though probably not with a powered fretsaw. Generally I find that power tools are, more often than not, just a quicker way of stuffing the job up....

I have made metal grills before, but never in wood. I suppose like everything else; when you've done a dozen or two it becomes a simple task.

I suppose I could do something in metal for this one, but I think I'd prefer to try and do something more in keeping with the original, probably with a similar or identical pattern. I don't think I'd like anything too simple, like the grills you often see on old Hohners on German eBay; a series of not very symmetrical 1 cm holes drilled through a bit of masonite.... I'm sure I can do better than that!

Probably dreaming, but something like this might be nice   :D    Probably a bit beyond my skills though.

« Last Edit: May 20, 2016, 11:30:03 AM by Malcolm Clapp »
Logged
Tuner/repairer, now retired.

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: Info wanted from Dino Baffetti Carnival 3 or ART 85 owners
« Reply #6 on: May 20, 2016, 12:28:11 PM »

Don't be too shy of the powered fretsaw Malcolm.  I had never used one  until Emanuelle Pariselle's course and got on fine with it. The important thing is to get the paper pattern well pasted to the wood.
   Mind you we were doing six at a time screwed together so you could multiply one cock-up by six  :'(
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Info wanted from Dino Baffetti Carnival 3 or ART 85 owners
« Reply #7 on: May 20, 2016, 12:49:05 PM »

Thanks for your advice. I might have a go, though probably not with a powered fretsaw. Generally I find that power tools are, more often than not, just a quicker way of stuffing the job up....

I have made metal grills before, but never in wood. I suppose like everything else; when you've done a dozen or two it becomes a simple task.

I suppose I could do something in metal for this one, but I think I'd prefer to try and do something more in keeping with the original, probably with a similar or identical pattern. I don't think I'd like anything too simple, like the grills you often see on old Hohners on German eBay; a series of not very symmetrical 1 cm holes drilled through a bit of masonite.... I'm sure I can do better than that!

Probably dreaming, but something like this might be nice   :D    Probably a bit beyond my skills though.

Something along those lines would be quite feasible in wood, though I might be a bit wary of the three unsupported projections along the top (depending on the type and thickness of the timber).

Graham
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

Grape Ape

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1209
Re: Info wanted from Dino Baffetti Carnival 3 or ART 85 owners
« Reply #8 on: May 25, 2016, 02:34:29 AM »

Thanks for your advice. I might have a go, though probably not with a powered fretsaw. Generally I find that power tools are, more often than not, just a quicker way of stuffing the job up....

I have made metal grills before, but never in wood. I suppose like everything else; when you've done a dozen or two it becomes a simple task.

I suppose I could do something in metal for this one, but I think I'd prefer to try and do something more in keeping with the original, probably with a similar or identical pattern. I don't think I'd like anything too simple, like the grills you often see on old Hohners on German eBay; a series of not very symmetrical 1 cm holes drilled through a bit of masonite.... I'm sure I can do better than that!

Probably dreaming, but something like this might be nice   :D    Probably a bit beyond my skills though.

That is one COOL looking grill!
Logged

Malcolm Clapp

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1119
  • Loving my Hohner-reeded wet MMM CastaTommy
Re: Info wanted from Dino Baffetti Carnival 3 or ART 85 owners
« Reply #9 on: June 06, 2016, 02:05:52 AM »

OK, I did the "jigsaw puzzle" and it turned out quite reasonable (unless you look too closely!) Might have a go at making a new grill one day, but it will do for now.... Thanks for the responses and the advice which I've taken on board for future reference.

Don't know if anyone else here has one of these G/C Excelsiolas, but I'm quite impressed, especially after replacing the grill cloth with something allowing more air flow (Penelope double-weave needlepoint canvas, as mentioned in another thread).

I have converted it from LMM to MMM and it's definitely a keeper! Compact for a 3 voice (265 x 160) and 3.5kg. Not much bigger than a CastaTommy and imho almost as responsive.
« Last Edit: June 06, 2016, 02:23:30 AM by Malcolm Clapp »
Logged
Tuner/repairer, now retired.

ACE

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 535
Re: Info wanted from Dino Baffetti Carnival 3 or ART 85 owners
« Reply #10 on: June 07, 2016, 08:59:41 AM »



Probably dreaming, but something like this might be nice   :D   

Send a design to an online plasma cutting service. Not as expensive as it sounds, I got a one off weather vane made, far cheaper than buying a ready made one.
Logged
Paddy Clancy, paddlewheel gob iron cheepo g/d anglo
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal