Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Leather tape or the like to limit button travel slightly?  (Read 1896 times)

0 Members and 1 Guest are viewing this topic.

blunderbox

  • Good talker
  • **
  • Offline Offline
  • Posts: 74
Leather tape or the like to limit button travel slightly?
« on: May 26, 2016, 07:43:10 PM »

I would like to slightly limit the travel of buttons into the keyboard.  Right now, the buttons go just a smidgen more into the keyboard than I like, and it seems like I could reduce this without reducing/impacting the sound.

Is there perhaps something like leather tape, with an adhesive backing that would enable me to apply a strip and thereby limit button travel?  I have used other materials when I needed something thicker, but in this case, I just want a very minor adjustment.

Thanks.
Logged

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Leather tape or the like to limit button travel slightly?
« Reply #1 on: May 26, 2016, 07:55:22 PM »

It would be good to know a few more details, especially the make of the instrument, and whether it has a detachable keyboard back plate. If it is a Hohner pokerwork/erica, for instance, the topic has been well covered on this forum. You need to search for previous threads.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

gettabettabox

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 684
Re: Leather tape or the like to limit button travel slightly?
« Reply #2 on: May 26, 2016, 08:23:51 PM »

a strip of dense leather or similar material has done fine for me before. i wouldn't go further than 2-3mm though?
Logged

blunderbox

  • Good talker
  • **
  • Offline Offline
  • Posts: 74
Re: Leather tape or the like to limit button travel slightly?
« Reply #3 on: May 27, 2016, 12:22:44 AM »

It's an older Paolo, and easy to take off the plate under the keyboard.  There is already a thin strip of leather on top of the felt.  Looks easy enough to just add another strip.  What type of glue would you recommend?
Logged

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Leather tape or the like to limit button travel slightly?
« Reply #4 on: May 27, 2016, 12:47:46 AM »

It's an older Paolo, and easy to take off the plate under the keyboard.  There is already a thin strip of leather on top of the felt.  Looks easy enough to just add another strip.  What type of glue would you recommend?

You could use special leather adhesive but for this job it's not too critical so I would use a contact adhesive such as Bostik Clear, or Bostik Solvent Free which doesn't dry hard (unlike most PVA glues). Use sparingly and ignore the usual instructions for contact adhesive, involving putting the glue on both surfaces and waiting for a few minutes. Just a thin smear on one surface and immediately press into place should do the trick.

However, before gluing permanently into place, test out your new piece of leather strip for the correct thickness by fixing it temporarily into place using a couple of small pieces of double-sided sticky tape or a couple of small blobs of BluTack. Make sure the new strip doesn't reduce the travel so much that the pallets do not open sufficiently, partially muting the sound. If it's OK, then glue into place.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Malcolm Clapp

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1119
  • Loving my Hohner-reeded wet MMM CastaTommy
Re: Leather tape or the like to limit button travel slightly?
« Reply #5 on: May 27, 2016, 12:56:03 AM »

Gluing leather to leather could cause the original layer to break away.

If access is that simple, why not replace the entire existing leather/felt with a layer of the correct/desirable thickness?

As for glue, I would use a contact adhesive myself. (The purists might prefer shellac or animal glue...)
Logged
Tuner/repairer, now retired.

blunderbox

  • Good talker
  • **
  • Offline Offline
  • Posts: 74
Re: Leather tape or the like to limit button travel slightly?
« Reply #6 on: May 27, 2016, 01:25:46 AM »

Perfect, thanks for the excellent info on glues, double stick tape test run, and idea of just replacing the leather that is already there.  Much appreciated.
Logged

mory

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 752
Re: Leather tape or the like to limit button travel slightly?
« Reply #7 on: May 27, 2016, 07:46:33 AM »

Not sure why all the talk is about leather as felt is the most usual material. It's easy to apply sticky back felt on top of what's already there and easily removable. If the original felt needs replacing Charlie Marshall (CGM) supplies the thicker types of blocking felt from piano manufacture, it's the same stuff. I'd be very wary of using contact adhesive it's a little toooo permanent. Good luck All the Best mory
Logged

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Leather tape or the like to limit button travel slightly?
« Reply #8 on: May 27, 2016, 08:39:28 AM »

...I'd be very wary of using contact adhesive it's a little toooo permanent.
Actually it's just fine; it holds the leather or felt well enough and quite possible to remove if need be. I know because I had to do this a few weeks ago, removing a felt strip previously glued to the inside of a keyboard base plate in order to treat the wood with woodworm fluid. The secret is not to use too much contact adhesive in the first place.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Leather tape or the like to limit button travel slightly?
« Reply #9 on: May 28, 2016, 09:40:13 AM »

I don't know whether my logic for choosing leather or similar is correct, it's really just an intuitive thing.  When doing the same on a Hohner Club Modell 1, I wanted a soft layer (felt) to absorb mechanical noise and a skin layer (leather) over it to reduce the tendency for the felt to crush locally under the lever.  A couple of attempts with different materials meant I had to scrape the glue away using a Stanley blade scraper - surprisingly easy and leaves a better finish than the original.  The glue residue doesn't matter as it is only cosmetic, soon to be covered and out of sight anyway!  In the end I found a piece of table protector fitted the bill.  It's that heavy plastic cover with felt under it used to protect a varnished table top.  It's about 4mm total thickness, but reduces a little when glued and the felt is none too dense, so probably yields around 3mm effectively as a stop.

Rob.
Logged

blunderbox

  • Good talker
  • **
  • Offline Offline
  • Posts: 74
Re: Leather tape or the like to limit button travel slightly?
« Reply #10 on: May 30, 2016, 10:44:55 PM »

I ended up using a piece of vinyl with a dense felt backing, which I affixed to the existing material with contact adhesive.  I used Steve's idea of giving it a trial run with double sticky tape.  It seems to work perfectly, I have button relief at almost exactly 3mm.  That small difference makes for a much nicer feel while playing.  Thanks all.
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal