Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: Replacement Valves  (Read 4559 times)

0 Members and 1 Guest are viewing this topic.

Grape Ape

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1209
Replacement Valves
« on: May 30, 2016, 09:08:47 PM »

Looking to order replacement valves for both an AD presswood and an old CF 2.2 row club, bass and treble.

Question 1, synthetic or leather, is there a consensus?

Quuestion 2, where can I order them so I have enough and the right sizes for both boxes?
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Replacement Valves
« Reply #1 on: May 30, 2016, 10:26:20 PM »

My favoured setup us to use vinyl valves for everything above about C above middle C, then leather below that. The lowest leather need helper springs, or use the leather with vinyl already attached.  I don't use vileda valves as a leather substitute, but they are cheaper and require less skill to use.  On cheaper boxes I'll usually use vinyl for all but the low bass reeds.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: Replacement Valves
« Reply #2 on: May 30, 2016, 10:49:58 PM »

I would go with the vinyl too. My leather/vinyl compound cutoff is any reed that has a blue tip or a weight.

The German American trading company in florida may be able to get the valves for you.
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997

Grape Ape

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1209
Re: Replacement Valves
« Reply #3 on: May 31, 2016, 03:17:25 PM »

I would go with the vinyl too. My leather/vinyl compound cutoff is any reed that has a blue tip or a weight.

The German American trading company in florida may be able to get the valves for you.

Thanks. Looks like these guys don't have a website?  Do you just call them and tell them what you need?
Logged

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Replacement Valves
« Reply #4 on: May 31, 2016, 03:22:57 PM »

Looking to order replacement valves for both an AD presswood and an old CF 2.2 row club, bass and treble.

Quuestion 2, where can I order them so I have enough and the right sizes for both boxes?

Standard melnet answer - Charlie Marshall. Doesn't matter where you are in the world, Charlie seems to able to get the stuff on your doorstep almost before you've ordered it!  Wide selection of valves on Charlie's website, and he's more than happy to advise if you're not 100% sure what you need.  http://www.cgmmusical.co.uk/CGM_Musical_Services/Welcome.html

Cheers
Graham
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Replacement Valves
« Reply #5 on: June 01, 2016, 09:38:35 PM »

The problem with those cheap synthetic big valves is that they don't last as well as leather.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Replacement Valves
« Reply #6 on: June 02, 2016, 07:31:19 AM »

The problem with those cheap synthetic big valves is that they don't last as well as leather.

Hello Theo,

Can you enlarge on this please?
I have used them a few times over the last couple of years and they seem to be working fine and are not noisy. In your experience, in what way do they deteriorate, and roughly how long a useful life do they have? I'm just wondering whether I have built a bit of a valve time-bomb for myself.  :(

Thanks,
Steve
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Replacement Valves
« Reply #7 on: June 02, 2016, 08:46:46 AM »

I've never fitted them, but I've often had to replace them in boxes that have been worked on by others.  They seem to go rather floppy and not stay closed very well.  Difficult to know how long this takes but at a guess it's a handful of years.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Replacement Valves
« Reply #8 on: June 02, 2016, 09:04:32 AM »

Be interesting to keep an eye on that - I've just done a 30s Hohner 2915 using one of Charlie's sets of Pokerwork/Erica valves and they're all synthetic. Actually I do have some leather valves but I don't feel inclined to strip the new synthetic ones out & do a swap just yet.  Incidentally, I had occasion to do a little job inside the bass end of my Saltarelle yesterday, and notice 2 or 3 of the biggest valves were well on the way out - they're all synthetic, though the originals were leather. The new valves were put in when it went to a respected pro (not a melnet member as far as I know!) for a thorough going-over about 9 or 10 years ago.

Graham
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Replacement Valves
« Reply #9 on: June 02, 2016, 09:34:10 AM »

No I don't think it is the plastic outer layer that looses its spring.  It's the foamy layer which becomes more floppy than leather, perhaps combined with the plastic layers being thinner to start with.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Replacement Valves
« Reply #10 on: June 02, 2016, 10:25:50 AM »

No I don't think it is the plastic outer layer that looses its spring.  It's the foamy layer which becomes more floppy than leather, perhaps combined with the plastic layers being thinner to start with.

I've never fitted them, but I've often had to replace them in boxes that have been worked on by others.  They seem to go rather floppy and not stay closed very well.  Difficult to know how long this takes but at a guess it's a handful of years.

Thanks, Theo.
I think my approach will be to do nothing until (if, and when) the time comes to replace the synthetic valves. 
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Replacement Valves
« Reply #11 on: June 02, 2016, 11:42:24 AM »

Of course if they are working well there is no need to do anything.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Grape Ape

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1209
Re: Replacement Valves
« Reply #12 on: June 13, 2016, 10:52:09 PM »

Looking to order replacement valves for both an AD presswood and an old CF 2.2 row club, bass and treble.

Quuestion 2, where can I order them so I have enough and the right sizes for both boxes?

Standard melnet answer - Charlie Marshall. Doesn't matter where you are in the world, Charlie seems to able to get the stuff on your doorstep almost before you've ordered it!  Wide selection of valves on Charlie's website, and he's more than happy to advise if you're not 100% sure what you need.  http://www.cgmmusical.co.uk/CGM_Musical_Services/Welcome.html

Cheers
Graham

The following is an unpaid endorsement:

CGM Musical Services is one of the finest companies I have ever had the pleasure of doing business with.  Less than a week for delivery from Scotland to Ohio, THE quickest responses to my stupid questions and last minute changes to the order (including one where I forgot the time and emailed him well after 6pm (USA Eastern time zone!!!) and still received a response within minutes. Does the man ever sleep?  His prices were very competitive, and his service prompt, friendly, helpful, and patient. 
Logged

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Replacement Valves
« Reply #13 on: June 14, 2016, 12:22:25 AM »


The following is an unpaid endorsement:

CGM Musical Services is one of the finest companies I have ever had the pleasure of doing business with.  Less than a week for delivery from Scotland to Ohio, THE quickest responses to my stupid questions and last minute changes to the order (including one where I forgot the time and emailed him well after 6pm (USA Eastern time zone!!!) and still received a response within minutes. Does the man ever sleep?  His prices were very competitive, and his service prompt, friendly, helpful, and patient.

Yes - that's Charlie! Pleased you've had such a fine service from him and it's great that you've written such well-deserved praise. I would say that your experience is typical of all of us here who have done business with him.

I wonder if he is aware of our endorsements and feedback? It would be nice to think so...  :|glug  (:)
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

forrest

  • Other Places::
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1009
  • digits still functioning
Re: Replacement Valves
« Reply #14 on: June 14, 2016, 05:56:08 AM »

Some personal observations:

    My late 1920's Hohner 3 row is still sporting the original leathers on the treble side. When I first acquired it about 15 or so years ago, the leathers were just a bit stray here and there. I made "combing tools"  (for want of a better term) from  paper clips to re-smooth and flatten the valves, as the leather was still rather supple. This worked out well, and after 80 years or so, they still work fine. I did replace the valves on the bass reeds, however, with new leather valves and booster springs, as they were getting curly and stiff.

  My 1950's Pokerwork still has almost all of it's original synthetic valves. There have been a few that I replaced over the years that detached. I have wanted to renew all the valves and wax on this one, but it plays so well I don't think I will touch it until reeds start shedding  ;D
« Last Edit: June 14, 2016, 11:20:43 AM by Clive Williams »
Logged

Anahata

  • This mind intentionally left blank
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6767
  • Oakwood D/G, C/F Club, 1-rows in C,D,G
    • Treewind Music
Re: Replacement Valves
« Reply #15 on: June 14, 2016, 08:20:35 AM »

"combing tools"

That link (which I've deliberately excised from the quote) made my anti-virus pop up a big red warning. Tread with care.

"infected by  Trojan-Downloader.JS.Agent.hbs,  says Kaspersky"
Logged
Слава Україні !
Music recording and web hosting: www.treewind.co.uk
Mary Humphreys and Anahata: www.maryanahata.co.uk
Ceilidh band: www.barleycoteband.co.uk

vof

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 221
Re: Replacement Valves
« Reply #16 on: June 14, 2016, 02:14:01 PM »

"combing tools"

That link (which I've deliberately excised from the quote) made my anti-virus pop up a big red warning. Tread with care.

"infected by  Trojan-Downloader.JS.Agent.hbs,  says Kaspersky"

Looks like Clive has neutered the original link so it is safe and won't take you anywhere...

Vince
Logged
Vince O'Farrell
Dino BPII; Hohners: red Erica G/C; couple of 1040s in C and G project boxes.

forrest

  • Other Places::
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1009
  • digits still functioning
Re: Replacement Valves
« Reply #17 on: June 14, 2016, 06:28:04 PM »

"combing tools"

That link (which I've deliberately excised from the quote) made my anti-virus pop up a big red warning. Tread with care.

"infected by  Trojan-Downloader.JS.Agent.hbs,  says Kaspersky"

Looks like Clive has neutered the original link so it is safe and won't take you anywhere...

Vince

Wow....that seemed to cause no difficulties on my end, I hope there are no damages out there. The link was to a page on the site "Talking Reeds" which has been up for ages....even before I joined Melnet many years back. For those more savvy about these things, could this be implanted in their link?.... :o
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Replacement Valves
« Reply #18 on: June 14, 2016, 06:32:23 PM »

"Talking Reeds" is indeed an old site and I don't think it is being actively updated.  It iszquitecpossibke that it uses old versions of software which could make it vulnerable to being hacked and used as a source of downloadable nasties. Take care if using.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Thrupenny Bit

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 7232
  • happily squeezing away in Devon
Re: Replacement Valves
« Reply #19 on: June 15, 2016, 05:57:47 PM »

Just thread hopping as you do......
Absolutely agree with Grape Ape regarding CGM music.
Only dealt with Charlie once recently but found him very informative and helpful. Items very competitive, arrived promptly at the other end of the island.
Good service.
Q
Logged
Thrupenny Bit

I think I'm starting to get most of the notes in roughly the right order...... sometimes!
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal