Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Filling Holes  (Read 1259 times)

0 Members and 1 Guest are viewing this topic.

Grape Ape

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1209
Filling Holes
« on: June 05, 2016, 07:28:43 PM »

The previous owner of my hohner presswood thought it would be a good idea to save money on strap brackets and instead drive two rather thick screws into the center of the box's top and bottom (i.e. Not where I will be placing the replacement brackets) to which he ingeniously attached an old leather belt. 

the question is simple: is there any reason that good old fashioned regular wood filler wouldn't do the trick in terms of more or less hiding the hole but more importantly keeping the box airtight?
Logged

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Filling Holes
« Reply #1 on: June 05, 2016, 07:37:32 PM »

Woodfiller will do it. Alternatively, mix some sawdust with wood glue or superglue and use that as a filler.
As a belt and braces precaution against leaks you could run some wax over the inside of the filled hole.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: Filling Holes
« Reply #2 on: June 05, 2016, 07:42:11 PM »

Having just filled some holes with sawdust mixed with PVA wood glue, next time I shall use wood filler.  :(
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Filling Holes
« Reply #3 on: June 05, 2016, 10:07:35 PM »

Having just filled some holes with sawdust mixed with PVA wood glue, next time I shall use wood filler.  :(

Ha!  ;D
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

robotmay

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 820
Re: Filling Holes
« Reply #4 on: June 05, 2016, 11:37:33 PM »

I repaired quite a few old holes with the wood glue + sawdust combo. Once I re-polished over the top they look like almost natural parts of the wood. Had to be careful not to apply too much and have it change the colour of the surrounding area though.
Logged

Psuggmog Volbenz

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 318
    • musical whimsy
Re: Filling Holes
« Reply #5 on: June 15, 2016, 09:17:28 AM »

My preference is to fill the offending holes with self made wooden plugs made of the same species of wood if possible. I split the wooden patch blanks so that there is no runout in the grain and then carve to the needed shape. The holes are not always cylindrical. I leave the plug slightly long and use hot hide glue.  I orient the grain of the plug in the same direction as the parent wood. After the glue has set, i trim the plug flush with a sharp knife or chisel. The glue squeeze out can be easily cleaned up with a brush dipped in hot water as soon as the glue has cooled to the gel stage. I use the same method to fill holes left from moving the location of thumb straps.

This method also works for repairing a stripped out hole when a screw or nail must be reused in the same location. This way an oversized replacement fastener isn't required.
« Last Edit: June 15, 2016, 09:21:05 AM by Psuggmog Volbenz »
Logged
I'm squeezin' and they're wheezin': old junker boxes
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal