Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 2 [3] 4 5 6   Go Down

Author Topic: questions about the Castagnari Max  (Read 30249 times)

0 Members and 1 Guest are viewing this topic.

melodeon

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1732
Re: questions about the Castagnari Max
« Reply #40 on: June 09, 2016, 09:52:15 PM »

Butt joints are expedient, time cutting, no skill required, cost cutting device that is unsightly and weak. Albeit  Savoy proudly displays a photo of himself standing on one of his butt boxes. 

I recall a friend ordering a top of the line Martin box and when it arrived, returned it immediately for the simple reason that no self respecting craftsman would use butt joints.

Use boards that are too long. Glue em up, get out the belt sander.. 2 minutes voila!  a perfect butt box. And to top it off, add some cheezy stamped out ( everyone uses em) aluminum corners that are poorly made and bent. The height of cheeziness is get the gold anodized corners.  ": )
Quite a distinctive look.
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: questions about the Castagnari Max
« Reply #41 on: June 09, 2016, 09:55:10 PM »

Butt joints are expedient, time cutting, no skill required, cost cutting device that is unsightly and weak. Albeit  Savoy proudly displays a photo of himself standing on one of his butt boxes. 

I recall a friend ordering a top of the line Martin box and when it arrived, returned it immediately for the simple reason that no self respecting craftsman would use butt joints.

Use boards that are too long. Glue em up, get out the belt sander.. 2 minutes voila!  a perfect butt box. And to top it off, add some cheezy stamped out ( everyone uses em) aluminum corners that are poorly made and bent. The height of cheeziness is get the gold anodized corners.  ": )
Quite a distinctive look.

What effect does butt jointing the frames have on the playability, sound quality etc of a box.

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: questions about the Castagnari Max
« Reply #42 on: June 09, 2016, 10:12:42 PM »


What effect does butt jointing the frames have on the playability, sound quality etc of a box.
Depends on what type of wood you use for the case.  >:E
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: questions about the Castagnari Max
« Reply #43 on: June 09, 2016, 10:22:25 PM »


What effect does butt jointing the frames have on the playability, sound quality etc of a box.
Depends on what type of wood you use for the case.  >:E

Stop, right there!
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Anahata

  • This mind intentionally left blank
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6767
  • Oakwood D/G, C/F Club, 1-rows in C,D,G
    • Treewind Music
Re: questions about the Castagnari Max
« Reply #44 on: June 09, 2016, 10:28:28 PM »

It might have some influence on how high you'd have to drop it from to make it fall apart on a concrete floor.
Logged
Слава Україні !
Music recording and web hosting: www.treewind.co.uk
Mary Humphreys and Anahata: www.maryanahata.co.uk
Ceilidh band: www.barleycoteband.co.uk

Winston Smith

  • Hero Member
  • *****
  • Online Online
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: questions about the Castagnari Max
« Reply #45 on: June 09, 2016, 10:44:24 PM »

Maybe I'm just showing my normal level of numbskulledness here, but I really cannot imagine that either mitred or butted corner joints would make any appreciable difference to the box's integral strength, especially when they are both (surely?) reinforced in some way.
Has anyone put them to the test? Depending on the point of impact, I expect that one would break easier than the other, but that reasoning would apply to both/either types of joint.
Aesthetically, I suppose that many people would think that the mitred joints would look more pleasing, but how many will ever see them? 
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

playandteach

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3526
  • Currently a music teacher in a high school.
Re: questions about the Castagnari Max
« Reply #46 on: June 09, 2016, 11:05:54 PM »

I've spent money I had tucked away on instruments for my kids (my son's violin is the best part of 200 years old) and it is mildly annoying not to have a new toy for myself, but rewarding to hear them behind a Rolls Royce instead of the Vauxhall Chevette (or Vauxhall Shove-it as I used to call it)  that I had to put up with.
Logged
Serafini R2D2 GC, Serafini GC accs 18 bass

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: questions about the Castagnari Max
« Reply #47 on: June 09, 2016, 11:58:11 PM »

Wow - I didn't think my original query was going to spark such a diverse discussion.  There seems to be a lot of hard lines drawn here in regards to several different issues.

I'm not really sure why the thumbstrap causes such a fuss.  Some people like them and use them, others don't and don't use them.  I'd like to think that most of the anti-thumbstrap dialogue on here is in jest...there's certainly no need to try and make others feel bad because they play an instrument in a different fashion than someone else.  I don't think there are really any rules as to how you choose to play the button box - if it works for you, then it works.  I use it, and most Quebec box players use it and do a damn fine job with it too!  Surely it's all just personal preference.

I appreciate all the feedback about the Castagnari and the Beltuna.  As luck would have it, somebody relatively close to me was selling their old, Castagnari Max in D for a fraction of the cost a new one would go for, so I decided to go for it.  The very low price, coupled with the fact that it was being sold within the country and would not be subject to customs fees, made it too good an opportunity to pass up.  It's also one of the older, smaller models of the Castagnari Max, by the looks of it.  One of the interior photos shows that it was built in 1999.  I look forward to trying it out, and hopefully making it work for me.  I'm excited...
Logged
C#/D player

melodeon

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1732
Re: questions about the Castagnari Max
« Reply #48 on: June 10, 2016, 12:05:44 AM »

"Maybe I'm just showing my normal level of numbskulledness here, but I really cannot imagine that either mitred or butted corner joints would make any appreciable difference to the box's integral strength, especially when they are both (surely?) reinforced in some way.
Has anyone put them to the test? Depending on the point of impact, I expect that one would break easier than the other, but that reasoning would apply to both/either types of joint.
Aesthetically, I suppose that many people would think that the mitred joints would look more pleasing, but how many will ever see them"

Point 1.

In a minor way, miters do make a difference. Woodworking 101.. never join end grain to long grain.

Mitered joints, including on boxes, are rarely reinforced externally except with great honking metal plates. Some traditionalist minded Cajun makers who use miters do use the metal , unnecessary, corners.
Almost always you will see internal blocks in the joints.
The mitered surface is larger than a butt and larger gluing surface.

Point 2.  Shall we test a violin and see if it breaks, then why an accordion ?

Point 3..   " how many will ever see them.. ?"
Not the point at all.  I look inside a Beltrami, Briggs,  Gaillard, or a Castagnari and then look inside a Gabbanelli or one of  the top three Cajun maker's boxes... you'll see.... all you need to know without ever playing one.

Some folks bush the actuating arms, match the grain, and make many of their own parts...others put animals on the bellows, or inlay reinstones or  place their name the size of a billboard on the face of the box.

I make some art like stuff...
Don't bother looking at the front .. look at the back.

It's all about exceptionalism.

mselic
Congrats on the score....

Can you take a tape measure or ruler to it and measure top to bottom, front to back. ?

I had a 1999, good box.
Logged

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: questions about the Castagnari Max
« Reply #49 on: June 10, 2016, 12:23:58 AM »

[quote author=melodeon link=topic=18910.msg230557#msg230557 date=1465513544

Can you take a tape measure or ruler to it and measure top to bottom, front to back. ?

I had a 1999, good box.
[/quote]

I will do so, once I get the box, and report back.

Matt
Logged
C#/D player

Winston Smith

  • Hero Member
  • *****
  • Online Online
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: questions about the Castagnari Max
« Reply #50 on: June 10, 2016, 12:53:46 AM »

"Exceptionalism"? But only if you stick to someone else's basic pattern of mass production?

If I was making a melodeon I'd use a mix of joints (mitred, butted and dovetailed!) just to spite the traditionalists! And I still don't believe that the little bit of extra gluing surface on a mitred joint would make any appreciable (practical) difference to the joints inherent strength.

"Point 2.  Shall we test a violin and see if it breaks, then why an accordion ?"

What a silly response! I should imagine that violin makers (like makers of most things, including accordions) test their instruments for resistance to breakage. The point, which I thought was obvious, was whether reinforced joints of both or either type had been tested. 

"Point 3..   " how many will ever see them.. ?"
Not the point at all.  I look inside ............... boxes... you'll see.... all you need to know without ever playing one.

I don't quite understand this point. If you're looking for quality workmanship, I'd certainly expect to find dovetailed joints (which, of course, entail joining end grain to long grain. Oh my!) and not the unskilled mitred kind of joint which you seem to prefer.

Horse for courses, I suppose. Either of those two joints is (evidently) quite acceptable in melodeon construction, but to argue the respective merits of either is like comparing a red toy accordion to a blue toy accordion when, really, you should be looking at a vintage Hohner! (Or whatever else you judge to be a "quality" instrument.)
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Gary P Chapin

  • L'Accordéonaire
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1950
  • We are all the Free Reed Liberation Orchestra
    • Accordeonaire -- my blog of the last 15 years
Re: questions about the Castagnari Max
« Reply #51 on: June 10, 2016, 01:30:32 AM »

I'm not really sure why the thumbstrap causes such a fuss.  Some people like them and use them, others don't and don't use them.

I appreciate your care, but this is a really well tempered (ha!) discussion board, and (having started the thumb strap thing) I took it all in good humor.

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: questions about the Castagnari Max
« Reply #52 on: June 10, 2016, 03:10:33 AM »


Triskel... Kindly expound on your preference for the Beltuna...
I have been interested but , alas, the two ( known to me) US dealers are to be avoided.
 
Do they have stand up , removeable, reed blocks or lay downs. ?
Any salient features that attract you...?
Other than the air button, are there other reasons you favor the Beltuna over the Castagnari. ?

Considering the Italians have been making one rows for quite some time, your statement about them is curious.
In what areas do you think they are lacking.

Are you in favor of lay down reeds  as opposed to stand ups?


They have typical cajun made reed blocks  two standing and two laying down.
the slides are better than most cajun (metal versus wood)IMO. I don't know Castagnari uses?
I like the bigger buttons on mine and the action is as good as any box I've played.
Have you seen the corners on these? they don't get much nicer ;)
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: questions about the Castagnari Max
« Reply #53 on: June 10, 2016, 03:36:34 AM »

"

Point 1.

In a minor way, miters do make a difference. Woodworking 101.. never join end grain to long grain.


Just the opposite if your a woodworker you join wood together like this all the time.
look at any high quality kitchen cabinet and the face frame is end grain to long grain. (and all paneled cabinet door frames -style and rail type.)  Door and window trim "typically" butt joint because it looks better and its way easier (:)

Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

Anahata

  • This mind intentionally left blank
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6767
  • Oakwood D/G, C/F Club, 1-rows in C,D,G
    • Treewind Music
Re: questions about the Castagnari Max
« Reply #54 on: June 10, 2016, 07:31:06 AM »

I'd certainly expect to find dovetailed joints (which, of course, entail joining end grain to long grain. Oh my!)

Pedantically: only a bit. There's a LOT of long grain glued to long grain in a dovetailed joint.
Plus, of course, the dovetail is inherently stronger because (a) it holds together to some extent even without the glue and (b) there's a much larger total glued surface.
(disclaimer: I'm not an expert on this, so don't know how much it matters)

Also general point about violins: the body of the instrument is ALL butt joints!
Logged
Слава Україні !
Music recording and web hosting: www.treewind.co.uk
Mary Humphreys and Anahata: www.maryanahata.co.uk
Ceilidh band: www.barleycoteband.co.uk

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: questions about the Castagnari Max
« Reply #55 on: June 10, 2016, 07:51:11 AM »

They [Beltunas] have typical cajun made reed blocks  two standing and two laying down.
the slides are better than most cajun (metal versus wood)IMO. I don't know Castagnari uses?
I like the bigger buttons on mine and the action is as good as any box I've played.
Have you seen the corners on these? they don't get much nicer ;)

Castagnari use aluminium sliders in the Max (and AFAIK, all of their other models which incorporate sliders).
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: questions about the Castagnari Max
« Reply #56 on: June 10, 2016, 08:06:17 AM »

They [Beltunas] have typical cajun made reed blocks  two standing and two laying down.
the slides are better than most cajun (metal versus wood)IMO. I don't know Castagnari uses?
I like the bigger buttons on mine and the action is as good as any box I've played.
Have you seen the corners on these? they don't get much nicer ;)

Castagnari use aluminium sliders in the Max (and AFAIK, all of their other models which incorporate sliders).

Hohner use metal sliders as well  ;)

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: questions about the Castagnari Max
« Reply #57 on: June 10, 2016, 08:07:45 AM »

"Maybe I'm just showing my normal level of numbskulledness here, but I really cannot imagine that either mitred or butted corner joints would make any appreciable difference to the box's integral strength, especially when they are both (surely?) reinforced in some way.
Has anyone put them to the test? Depending on the point of impact, I expect that one would break easier than the other, but that reasoning would apply to both/either types of joint.
Aesthetically, I suppose that many people would think that the mitred joints would look more pleasing, but how many will ever see them"
<snip>

But my question - What effect does butt jointing the frames have on the playability, sound quality etc of a box. - still has not been answered

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11154
  • Wirral UK
    • Chris Ryall
Re: questions about the Castagnari Max
« Reply #58 on: June 10, 2016, 08:18:35 AM »

My Gaillard is butted, and Bertand's kit seems to have … a fair playability rating? I think we (eventually) agreed that accoustics of a box are dominated by its air spaces and that wood has very little to do with it. So (I assume) for its corners?

I have to say that my mitred casta survived when my 3 year old flicked it off shoulder … ending on a Beverley paving slab. So arguably one's family are a bigger consideration ;)
Logged
  _       _    _      _ 

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: questions about the Castagnari Max
« Reply #59 on: June 10, 2016, 08:53:53 AM »

Quote from: Lester link=topic=18910.msg230567#msg230567

Hohner use metal sliders as well  ;)
And, on the strength of one sample (pressed wood) mitred corners underneath them  ;D
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."
Pages: 1 2 [3] 4 5 6   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal