Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Dino Baffetti (Binci) Keys Sticking (reprise)  (Read 5030 times)

0 Members and 1 Guest are viewing this topic.

Adam Cooper

  • Member
  • *
  • Offline Offline
  • Posts: 9
Dino Baffetti (Binci) Keys Sticking (reprise)
« on: June 10, 2016, 05:41:53 PM »

Folks - I know this topic has been aired before, but my question is quite specific.

I would like to pick the brains of anyone who has actually disassembled a similar keyboard...

I have been able to drift the pivot rod out a little way, having scraped filler out from the woodwork (I got the wobbles and stopped around the first key). Is that likely to be the correct approach (after removing the treble end from the bellows and removing the grille so the keys can be manipulated). It is a 2mm rod and I'm concerned about the size of the hole in the keys: e.g problems getting the pivot rod back through, causing damage to the key, etc. I used 2mm rod to drift but also have 1/16" rod. I put a slight chamfer on the end of the drift-rod to help ease it into the holes. My idea is to drfit the pivot out a measured amount then retract the drift-rod to allow the removal of the two offending keys.

I'd like to know the spring arrangement: what to expect when removing/refitting.

I'd also like to confirm that the finger board remains fixed to the main box of the treble end.

Other notes:
- button 4 on both rows are sticking and there seems to be some coupling between them, such that depressing one causes a small deflection in the other, but no other key.
- the stickiness didn't move up the keyboard when I drifted the pivot
- it is affected by climate but gets worse in the hot and dry! Putting a sachet of dry silica gell in the case for a week made things worse...
- I'm fairly sure it isn't the sides
- the sticking point is generally in the middle of travel

Thanks in advance...

Adam

(BTW - you can assume a reasonable level of mechanical competence - I've built model steam engines from bar stock- and someone who is prepared to take a risk-based approach)
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Dino Baffetti (Binci) Keys Sticking (reprise)
« Reply #1 on: June 10, 2016, 05:57:40 PM »

Once the rod is sticking out sufficiently I find grasping it with a drill chuck which should allow you to both pull and rotate the rod. This usually means the rod will come out reasonably easily, it gets easier the more keys are disengaged.

The springs are like these http://www.cgmmusical.co.uk/CGM_Musical_Services/Springs.html#5 and are fitted under the bars the buttons are screwed into.

The fingerboard will remain attached.

Thing  I learned from the first go at this is to label the pieces so as to get them back in the correct position without a lot of faffing around.

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Dino Baffetti (Binci) Keys Sticking (reprise)
« Reply #2 on: June 10, 2016, 07:51:10 PM »

Lay a strip of sticky tape over the keys before withdrawing the rod. It will prevent keys flying across the room if the rod shifts more quickly than you were expecting.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Dino Baffetti (Binci) Keys Sticking (reprise)
« Reply #3 on: June 10, 2016, 11:20:26 PM »

I have pulled out the axle on a Dino to fix a sticky key. I pushed it out with a 2mm drift then pulled it out as far as the sticky key. It all came apart and went back together easily (and while its owner watched...so no pressure). I think I used the drift to gently clear the hole on the sticky key and smoothed and waxed the sides of the key to help it move freely in its slot.
« Last Edit: June 10, 2016, 11:24:51 PM by RogerThomas »
Logged

Sandy Flett

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 709
    • Accordion and Melodeon Blog
Re: Dino Baffetti (Binci) Keys Sticking (reprise)
« Reply #4 on: June 10, 2016, 11:24:23 PM »

I have pulled out the axle on a Dino to fix a sticky key. I pushed it out with a 2mm drift then pulled it out as far as the sticky key. It all came apart and went back together easily (and while its owner watched...so no pressure). I think I used the drift to gently clear the hole on the sticky key.

What is a drift?
Logged
DG Dino Baffetti Carnival II (plus accordions)
Accordion and Melodeon blog

Sandy Flett

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 709
    • Accordion and Melodeon Blog
Re: Dino Baffetti (Binci) Keys Sticking (reprise)
« Reply #6 on: June 10, 2016, 11:33:00 PM »

Thanks.
Logged
DG Dino Baffetti Carnival II (plus accordions)
Accordion and Melodeon blog

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: Dino Baffetti (Binci) Keys Sticking (reprise)
« Reply #7 on: June 11, 2016, 01:21:16 PM »

A friend has a BB which had sticking keys (binding on the axle) a couple of years ago, fixed (same as every 5 years or so on my Oakwood) by taking it out and cleaning it and running it thorough each lever several times while the levers were out (tip -- write the number on the back of each lever before removing them).

Happened again this year and the axle was so stuck she couldn't get it out, and I couldn't either with either a drill chuck or mole grips (replacement axle already ordered from Charlie Marshall so damage didn't matter). In the end I had to take it down to my workshop and grip the axle in a heavy-duty engineering vice, and rotate the entire box to get it to come out -- and it was so tight I was gripping it with both hands and bracing my foot on the vice to get more traction. Still took a good quarter of an hour of heaving and puffing before it finally came out, I was dripping with sweat and had to sit down with a cold beer afterwards :-(

No idea why it had gone so ridiculously tight, but just a warning in case anyone else gets the same problem -- get a replacement axle first to avoid being boxless...
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

baz parkes

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1894
    • All Blacked Up
Re: Dino Baffetti (Binci) Keys Sticking (reprise)
« Reply #8 on: June 11, 2016, 03:24:26 PM »

Still took a good quarter of an hour of heaving and puffing before it finally came out, I was dripping with sweat and had to sit down with a cold beer afterwards :-(

No idea why it had gone so ridiculously tight, but just a warning in case anyone else gets the same problem -- get a replacement axle first to avoid being boxless...

And some beer in the fridge, presumably.... :|glug :|glug :|glug
Logged
On the edge of Cheshire's Golden Triangle, apparently...

Adam Cooper

  • Member
  • *
  • Offline Offline
  • Posts: 9
Re: Dino Baffetti (Binci) Keys Sticking (reprise)
« Reply #9 on: June 12, 2016, 02:16:09 PM »

Thanks to everyone for your helpful comments.

The drill chuck is definitely a good plan.

For the record, for anyone coming to this thread in the future...
Be VERY careful clearing the pivot hole in the lever arm. I over-cooked one of mine.
In my case, it is the pivot which prevents any sideways slop of the pallet; there is tons of clearance between the lever arm and the slot in the fingerboard. I made the mistake of clearing the hole until it ran easily on a bit of 2mm rod which was not the pivot. I conclude that there should be some residual stiffness in the fit and that the best approach is to make the tiniest adjustment and then refit the key to test whether the spring can return it. I'm annoyed with myself; I should have known better than to do anything other than test it in-situ.

Now looking for a supplier of spare lever arms :-) ... and deciding whether to up the stakes - try to machine and fit a bush made from some 1/8" copper tube.

At least its playable now.

Cheers, Adam
Logged

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Dino Baffetti (Binci) Keys Sticking (reprise)
« Reply #10 on: June 12, 2016, 02:58:21 PM »

I made the mistake of clearing the hole until it ran easily on a bit of 2mm rod which was not the pivot. I conclude that there should be some residual stiffness in the fit and that the best approach is to make the tiniest adjustment and then refit the key to test whether the spring can return it. I'm annoyed with myself; I should have known better than to do anything other than test it in-situ.

Now looking for a supplier of spare lever arms :-) ... and deciding whether to up the stakes - try to machine and fit a bush made from some 1/8" copper tube.

Rather than abandon the lever arm or make a bushing for the over-enlarged hole, one solution might be to fill the enlarged hole using fine wood dust and superglue or epoxy glue, then rebore and ream the hole carefully until it is a snug fit on the actual axle rod.

Also, wax the length of the axle rod with paraffin (candle) wax before reassembly.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

TomBom

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 471
Re: Dino Baffetti (Binci) Keys Sticking (reprise)
« Reply #11 on: June 12, 2016, 04:05:14 PM »

Another kind of solution may be to shim the lever arm with plastic.
You can cut off small strips from a plastic valve and glue that on one or both sides of the lever arm.
It really works: no more wobbling.

EDITED to add a photo
« Last Edit: June 13, 2016, 04:38:12 PM by TomBom »
Logged

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”

baz parkes

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1894
    • All Blacked Up
Re: Dino Baffetti (Binci) Keys Sticking (reprise)
« Reply #13 on: June 12, 2016, 04:14:34 PM »

All of the above is why I leave things like this to our sainted fettlers... :|glug
Logged
On the edge of Cheshire's Golden Triangle, apparently...

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: Dino Baffetti (Binci) Keys Sticking (reprise)
« Reply #14 on: June 13, 2016, 02:32:54 PM »

I made the mistake of clearing the hole until it ran easily on a bit of 2mm rod which was not the pivot. I conclude that there should be some residual stiffness in the fit and that the best approach is to make the tiniest adjustment and then refit the key to test whether the spring can return it. I'm annoyed with myself; I should have known better than to do anything other than test it in-situ.

Now looking for a supplier of spare lever arms :-) ... and deciding whether to up the stakes - try to machine and fit a bush made from some 1/8" copper tube.

Rather than abandon the lever arm or make a bushing for the over-enlarged hole, one solution might be to fill the enlarged hole using fine wood dust and superglue or epoxy glue, then rebore and ream the hole carefully until it is a snug fit on the actual axle rod.

Also, wax the length of the axle rod with paraffin (candle) wax before reassembly.

Given that the reason for the sticking seems to be tiny particles of wood wearing off from the hole through the lever arms and jamming up the pivot, I'd have thought that adding something sticky like candle wax might make the problem worse, not better.
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Dino Baffetti (Binci) Keys Sticking (reprise)
« Reply #15 on: June 13, 2016, 03:21:17 PM »

I made the mistake of clearing the hole until it ran easily on a bit of 2mm rod which was not the pivot. I conclude that there should be some residual stiffness in the fit and that the best approach is to make the tiniest adjustment and then refit the key to test whether the spring can return it. I'm annoyed with myself; I should have known better than to do anything other than test it in-situ.

Now looking for a supplier of spare lever arms :-) ... and deciding whether to up the stakes - try to machine and fit a bush made from some 1/8" copper tube.

Rather than abandon the lever arm or make a bushing for the over-enlarged hole, one solution might be to fill the enlarged hole using fine wood dust and superglue or epoxy glue, then rebore and ream the hole carefully until it is a snug fit on the actual axle rod.

Also, wax the length of the axle rod with paraffin (candle) wax before reassembly.

Given that the reason for the sticking seems to be tiny particles of wood wearing off from the hole through the lever arms and jamming up the pivot, I'd have thought that adding something sticky like candle wax might make the problem worse, not better.

The waxing advice comes from Emmanuel Pariselle on his melodeon making courses. Paraffin candle wax isn't sticky; on wood, it polishes to a nice, smooth, bearing surface. Don't try it with beeswax or reed wax though!
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: Dino Baffetti (Binci) Keys Sticking (reprise)
« Reply #16 on: June 15, 2016, 02:45:05 PM »

I made the mistake of clearing the hole until it ran easily on a bit of 2mm rod which was not the pivot. I conclude that there should be some residual stiffness in the fit and that the best approach is to make the tiniest adjustment and then refit the key to test whether the spring can return it. I'm annoyed with myself; I should have known better than to do anything other than test it in-situ.

Now looking for a supplier of spare lever arms :-) ... and deciding whether to up the stakes - try to machine and fit a bush made from some 1/8" copper tube.

Rather than abandon the lever arm or make a bushing for the over-enlarged hole, one solution might be to fill the enlarged hole using fine wood dust and superglue or epoxy glue, then rebore and ream the hole carefully until it is a snug fit on the actual axle rod.

Also, wax the length of the axle rod with paraffin (candle) wax before reassembly.

Given that the reason for the sticking seems to be tiny particles of wood wearing off from the hole through the lever arms and jamming up the pivot, I'd have thought that adding something sticky like candle wax might make the problem worse, not better.

The waxing advice comes from Emmanuel Pariselle on his melodeon making courses. Paraffin candle wax isn't sticky; on wood, it polishes to a nice, smooth, bearing surface. Don't try it with beeswax or reed wax though!

Hmm, I can see pros and cons. If the wax stops the wood wearing by providing a smooth bearing service it could prevent the problem happening in the first place. But if it does start to happen, the wax could then stop the wood particles escaping and make the problem worse. Wouldn't like to guess which one wins, typically the problem takes several years to show up...
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

Adam Cooper

  • Member
  • *
  • Offline Offline
  • Posts: 9
Re: Dino Baffetti (Binci) Keys Sticking (reprise)
« Reply #17 on: August 02, 2016, 08:45:11 PM »

for the record...

this problem has now (at least temporarily) been fixed

Making use of my drill press to get a nice stable and perpendicular arrangement, I held a 1.5mm smooth rod in the pivot hole while some D3 water resistant PVA wood glue set in the space surrounding the rod. Its easy to twist the rod out once the glue is dry. A number 48 drill at low speed was just enough to clear the excess dry glue. This appears to have avoided the pivot axis getting skew or moving its centre.

PVA glues are not the most durable, I suppose, so its an open question how long this will last...

Fingers crossed!
Adam
Logged

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Dino Baffetti (Binci) Keys Sticking (reprise)
« Reply #18 on: August 02, 2016, 11:44:36 PM »

At a gig last Sunday someone accidentally spilled a whole pint of water into the keyboard of my A/D Dino Baffetti Carnival. The sound man saw it and moved the box but I was on stage in a noisy reggae band so he couldn't really communicate. I only became aware when I tried to play it later in the set. Half the buttons were sticking down due to swollen wood. I finished the gig on melodica (with delay pedal of course).

Left the box in the workshop overnight, keys still sticking the following day. Six application of the heat gun over a period of eight hours and all is well.
I'm just grateful that it was water and not something more sticky.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal