Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: Parts !!  (Read 6564 times)

0 Members and 1 Guest are viewing this topic.

Henry Piper

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 368
Parts !!
« on: June 11, 2016, 03:03:17 PM »

Good Afternoon.
Two fairly straightforward ( I hope ) questions !!     
1).... what do melnetters use to replace the tiny pins used as pivots in the levers of  Hohner Bass mechanisms, and where can they be obtained from, I have been unable to find anything so small in any local D.I.Y shop.

2)....  Is it possible to obtain replacements for the metal corner pieces on the bellows frames of old Saxony made boxes, if so who from?.
Many Thanks.   Henry Piper.
Logged
From Ottery St Mary Devon. Currently Playing Dino Baffetti BP2 in D/G, Hohner Student 1 P.A conversion  in D/G,  Hohner 3515 Pre-Pokerwork in A/D,   2 row "Beaver Brand" in Bb/Eb, Hohner Pre- Erica in G/C .  Single row permanent 4 voice, 4 bass in C from old Hohner single row and bits of a cheap Cajun box !!,

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Parts !!
« Reply #1 on: June 11, 2016, 03:08:03 PM »

B&Q Veneer Pins 1mm  -  you need to trim them for length but work really well and a bag will last you forever

playandteach

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3526
  • Currently a music teacher in a high school.
Re: Parts !!
« Reply #2 on: June 11, 2016, 03:10:12 PM »

I've used veneer pins from Homebase (if you're in the uk) They seem fine - easy enough to bend and cut to length. They also had the nod from Theo.
If you can't find any, I can slip some in an envelope for you.
I'm sure the corners are available from cgm.
Logged
Serafini R2D2 GC, Serafini GC accs 18 bass

Henry Piper

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 368
Re: Parts !!
« Reply #3 on: June 11, 2016, 04:50:43 PM »

Thanks for that,
I've been looking at pins labelled as Panel pins, all of which seem too thick, I have both Homebase and B&Q near me, I will start looking for "veneer" pins.
As regards Corners, Charlie only seems to sell the 1/2 round body corners for Hohners, what I,m looking for are the flat corner trims that "wrap" around the corners of the bellow frames on old Saxony boxes, and Cajun style boxes.
Logged
From Ottery St Mary Devon. Currently Playing Dino Baffetti BP2 in D/G, Hohner Student 1 P.A conversion  in D/G,  Hohner 3515 Pre-Pokerwork in A/D,   2 row "Beaver Brand" in Bb/Eb, Hohner Pre- Erica in G/C .  Single row permanent 4 voice, 4 bass in C from old Hohner single row and bits of a cheap Cajun box !!,

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Parts !!
« Reply #4 on: June 11, 2016, 04:51:50 PM »

I think you'll struggle to find Saxony-type bellows corners. I know Charlie is something of a magician, but even he doesn't have a time-machine!  The options, as far as I am aware, are a) do the best clean-up job you can on the corners you've got, and put the best ones on the front; b) try and find another similar old box which has presentable corners but is otherwise beyond salvation; c) make some new ones by hand from nickel-silver sheet with a piercing saw.  If anyone knows of any other options, please spill the beans!

Graham
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Parts !!
« Reply #5 on: June 11, 2016, 04:56:22 PM »

Honestly they are rarely worth that much effort.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Henry Piper

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 368
Re: Parts !!
« Reply #6 on: June 11, 2016, 08:13:26 PM »

Honestly they are rarely worth that much effort.

I,m not actually restoring an old Saxony box,.....that seems like a lot of hard work for a doubtful result !!  I'm actually scratch building a 3 voice 1 row box  with something of a vintage look to use up more of my spare parts, and I thought that using those corners would help that look.
P.S.Theo  the reeds you tuned for me arrived safely on Friday, excellent job, many thanks.!!
« Last Edit: June 11, 2016, 08:15:49 PM by Henry Piper »
Logged
From Ottery St Mary Devon. Currently Playing Dino Baffetti BP2 in D/G, Hohner Student 1 P.A conversion  in D/G,  Hohner 3515 Pre-Pokerwork in A/D,   2 row "Beaver Brand" in Bb/Eb, Hohner Pre- Erica in G/C .  Single row permanent 4 voice, 4 bass in C from old Hohner single row and bits of a cheap Cajun box !!,

malcolmbebb

  • Hero Member
  • *****
  • Online Online
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: Parts !!
« Reply #7 on: June 11, 2016, 08:48:59 PM »

I think it's frame corners rather than bellows corners you want?
Anyway, this may not be of much use but there is a (USA based?)"boxbuilder" group on Yahoo
and someone was asking a similar question for new build boxes, with maybe modest success.
The group seems centred around self build one-row style boxes.
Anyhow, this is the thread, whether your enthusiasm stretches that far is up to you  :|glug
« Last Edit: June 11, 2016, 08:53:56 PM by malcolmbebb »
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

Henry Piper

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 368
Re: Parts !!
« Reply #8 on: June 11, 2016, 09:31:15 PM »

Its not that Vital!!   I just thought they would finish the frames off nicely, and be in keeping with the "vintage" look I'm aiming for, but as they seem to be near enough unobtainable I'll probably find another way to finish the corners.
Logged
From Ottery St Mary Devon. Currently Playing Dino Baffetti BP2 in D/G, Hohner Student 1 P.A conversion  in D/G,  Hohner 3515 Pre-Pokerwork in A/D,   2 row "Beaver Brand" in Bb/Eb, Hohner Pre- Erica in G/C .  Single row permanent 4 voice, 4 bass in C from old Hohner single row and bits of a cheap Cajun box !!,

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Parts !!
« Reply #9 on: June 11, 2016, 09:39:45 PM »

I might have some on an old wreck I'm just about to scrap.  I'll have a look on Monday.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Malcolm Clapp

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1119
  • Loving my Hohner-reeded wet MMM CastaTommy
Re: Parts !!
« Reply #10 on: June 12, 2016, 01:14:26 AM »

Henry, Dino Baffetti use these on their ART 25 model organetto, still in production..
I purchased some from them earlier this year.

Edited to add photo (I hope...)
« Last Edit: June 12, 2016, 01:20:04 AM by Malcolm Clapp »
Logged
Tuner/repairer, now retired.

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Parts !!
« Reply #11 on: June 12, 2016, 10:19:52 AM »

Just as an alternative to veneer pins, I was advised that Hornby track pins make excellent pivots - and those I was gven fitted perfectly.

Rob.
Logged

Ebor_fiddler

  • Chris
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2340
  • Hohner 1040 C One-Row, Sandpiper D/G, Liliput C/F
    • Ebor Morris
Re: Parts !!
« Reply #12 on: June 12, 2016, 11:45:16 PM »

If anyone thinks they would like Hornby trackpins, I think I still have a good supply (unrusted too!)
Logged
I'm a Yorkie!
My other melodeon's a fiddle, but one of my Hohners has six strings! I also play a very red Hawkins Bazaar in C and a generic Klingenthaler spoon bass in F.!! My other pets (played) are gobirons - Hohner Marine Band in C, Hohner Tremolo in D and a Chinese Thingy Tremolo in G.

Henry Piper

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 368
Re: Parts !!
« Reply #13 on: June 13, 2016, 09:16:46 AM »

If anyone thinks they would like Hornby trackpins, I think I still have a good supply (unrusted too!)

Shame Ive just ordered a load from Ebay !!, still there pretty cheap !!!
Logged
From Ottery St Mary Devon. Currently Playing Dino Baffetti BP2 in D/G, Hohner Student 1 P.A conversion  in D/G,  Hohner 3515 Pre-Pokerwork in A/D,   2 row "Beaver Brand" in Bb/Eb, Hohner Pre- Erica in G/C .  Single row permanent 4 voice, 4 bass in C from old Hohner single row and bits of a cheap Cajun box !!,

TomBom

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 471
Re: Parts !!
« Reply #14 on: June 13, 2016, 10:02:04 AM »

Henry, Dino Baffetti use these on their ART 25 model organetto, still in production..
I purchased some from them earlier this year.

Edited to add photo (I hope...)
If you are looking for these organetto style metal corners: I have more than I need.
Logged

Henry Piper

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 368
Re: Parts !!
« Reply #15 on: June 13, 2016, 09:02:27 PM »

Henry, Dino Baffetti use these on their ART 25 model organetto, still in production..
I purchased some from them earlier this year.

Edited to add photo (I hope...)
If you are looking for these organetto style metal corners: I have more than I need.

Thanks for the offer, but I,m having some made up in brass by a local metalwork teacher !!.
Logged
From Ottery St Mary Devon. Currently Playing Dino Baffetti BP2 in D/G, Hohner Student 1 P.A conversion  in D/G,  Hohner 3515 Pre-Pokerwork in A/D,   2 row "Beaver Brand" in Bb/Eb, Hohner Pre- Erica in G/C .  Single row permanent 4 voice, 4 bass in C from old Hohner single row and bits of a cheap Cajun box !!,

Psuggmog Volbenz

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 318
    • musical whimsy
Re: Parts !!
« Reply #16 on: June 15, 2016, 09:06:01 AM »

I have been planing to make metal corners, using the ones one my Globe Gold Medal boxes as a pattern. I have an antique foot operated punch press, which is up to the task, but I need to machine dies. My plan is to use sheet zinc, which I have, and then nickel plate the shaped and folded pieces. I will be using my own embossed graphics rather than copying an existing one.  I also have a 70+ year old rolling milli, which I am in the process of maching dies for, so I can reproduce silicon bronze wires in a cross-section similar to the ones one my Dienst made boxes. Most of the contemporary one row makers use either copper or aluminium wire to mount the pallets, which I find inferior.
Logged
I'm squeezin' and they're wheezin': old junker boxes

Stockaryd

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 255
Re: Parts !!
« Reply #17 on: June 15, 2016, 07:53:06 PM »

Sounds interesting.
What will the price be, approximately?  Need 40 corners to my old Gessner (and maybe more)
Logged
Hohner Corso, Hohner Erica, Emmanuel Pariselle, Gessner,   Koch,   Mariotti,    "China  NoName",   4 Toy,     -and now some more

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Parts !!
« Reply #18 on: June 15, 2016, 08:04:00 PM »

What I wouldn't give to visit Psuggmog Volbenz's lair, and have a guided tour!!!!!
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Henry Piper

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 368
Re: Parts !!
« Reply #19 on: June 15, 2016, 09:47:33 PM »

Sounds interesting.
What will the price be, approximately?  Need 40 corners to my old Gessner (and maybe more)

Why would you need 40+ ? surely you only need four for each end of the bellows frame, and four more for each  box end making a total of sixteen. !!
Logged
From Ottery St Mary Devon. Currently Playing Dino Baffetti BP2 in D/G, Hohner Student 1 P.A conversion  in D/G,  Hohner 3515 Pre-Pokerwork in A/D,   2 row "Beaver Brand" in Bb/Eb, Hohner Pre- Erica in G/C .  Single row permanent 4 voice, 4 bass in C from old Hohner single row and bits of a cheap Cajun box !!,
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal