Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2]   Go Down

Author Topic: Parts !!  (Read 6549 times)

0 Members and 1 Guest are viewing this topic.

Stockaryd

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 255
Re: Parts !!
« Reply #20 on: June 16, 2016, 12:05:47 AM »

Logged
Hohner Corso, Hohner Erica, Emmanuel Pariselle, Gessner,   Koch,   Mariotti,    "China  NoName",   4 Toy,     -and now some more

Stockaryd

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 255
Re: Parts !!
« Reply #21 on: June 16, 2016, 12:09:15 AM »

I scanned one of my still existing corners. 
Logged
Hohner Corso, Hohner Erica, Emmanuel Pariselle, Gessner,   Koch,   Mariotti,    "China  NoName",   4 Toy,     -and now some more

Stockaryd

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 255
Re: Parts !!
« Reply #22 on: June 16, 2016, 12:13:20 AM »

Logged
Hohner Corso, Hohner Erica, Emmanuel Pariselle, Gessner,   Koch,   Mariotti,    "China  NoName",   4 Toy,     -and now some more

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Parts !!
« Reply #23 on: June 16, 2016, 12:43:43 AM »

And here it is.

http://musik.ifokus.se/u2/85bdd67bc5362fd428c4e0056879a7b7/default/2015-durspel-gessner-c-dscn6194.jpg

You see the corners missing.

As suspected, the  missing items are bellows corners, not bellows frame corners. Hence the confusion of some earlier posts (i.e. why do you need 40 of them?).
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

triskel

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3290
Re: Parts !!
« Reply #24 on: June 16, 2016, 01:59:18 AM »

As suspected, the  missing items are bellows corners, not bellows frame corners. Hence the confusion of some earlier posts (i.e. why do you need 40 of them?).

Not exactly - narrow wooden bellows frames/dividers in every fold were Gessner's trade mark design, and that's what you're seeing in Stockaryd's photo (unless you're used to nailing bellows corners on  ;)), but I don't know of any source for new bellows frame corners in this day and age, and the old ones tend to disintegrate while you're playing... (I could do with a supply of them myself!)  :(

I know Gessner melodeons are very highly prized in Sweden and I see you call the instrument a "durspel" Stockaryd, so I guess that's where you must be?

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Parts !!
« Reply #25 on: June 16, 2016, 07:56:30 AM »

As suspected, the  missing items are bellows corners, not bellows frame corners. Hence the confusion of some earlier posts (i.e. why do you need 40 of them?).

Not exactly - narrow wooden bellows frames/dividers in every fold were Gessner's trade mark design, and that's what you're seeing in Stockaryd's photo (unless you're used to nailing bellows corners on  ;)), but I don't know of any source for new bellows frame corners in this day and age, and the old ones tend to disintegrate while you're playing... (I could do with a supply of them myself!)  :(

I know Gessner melodeons are very highly prized in Sweden and I see you call the instrument a "durspel" Stockaryd, so I guess that's where you must be?

Ah - yes, I see now. I didn't look closely enough.
Apologies to both!
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Henry Piper

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 368
Re: Parts !!
« Reply #26 on: June 16, 2016, 09:21:22 AM »

Ah !!     I too now see and understand !!.   Although that does seem an unnecessarily complicated bellow design.
Logged
From Ottery St Mary Devon. Currently Playing Dino Baffetti BP2 in D/G, Hohner Student 1 P.A conversion  in D/G,  Hohner 3515 Pre-Pokerwork in A/D,   2 row "Beaver Brand" in Bb/Eb, Hohner Pre- Erica in G/C .  Single row permanent 4 voice, 4 bass in C from old Hohner single row and bits of a cheap Cajun box !!,

Stockaryd

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 255
Re: Parts !!
« Reply #27 on: June 16, 2016, 11:02:30 AM »

Yes. Sweden it is.
Durspel it is and disintegrade they do! Very  fragile. They are screwed on. So I have to find small screws too.
And, yes, it is an unnecessarily complicated bellow design.
BUT . . . if you produce new bellow  corners like this you probably could sell a lot.  ;)   
 
And I need 8 hooks for my old Koch, too.

And then I have to learn how to play them.
Logged
Hohner Corso, Hohner Erica, Emmanuel Pariselle, Gessner,   Koch,   Mariotti,    "China  NoName",   4 Toy,     -and now some more

Psuggmog Volbenz

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 318
    • musical whimsy
Re: Parts !!
« Reply #28 on: June 18, 2016, 09:47:34 AM »

Sounds interesting.
What will the price be, approximately?  Need 40 corners to my old Gessner (and maybe more)
The main expense, would be the time to machine the dies needed to punch out the shapes. It is also possible to hand cut replacements using one of the existing corners as a pattern, by carefully flattening all bends until it is all in one plane. This piece could be used as a template to layout replacement corners.  When the layout is completed, the pieces can be cut out using a hand nibbler.  I prefer to use this tool rather than shears because more intricate shapes can be made with less distortion. I try to match the same gage and type of metal. It is possible to electroplate the new pieces,  to match the old ones.
Logged
I'm squeezin' and they're wheezin': old junker boxes

Psuggmog Volbenz

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 318
    • musical whimsy
Re: Parts !!
« Reply #29 on: June 18, 2016, 10:09:03 AM »

There are photos of the process mentioned in my post above, describing how to hand make metal replacement parts without a press. My post #27 in this thread:
http://forum.melodeon.net/index.php/topic,17993.msg220961.html#msg220961
The hand nibbler is shown. The metal blank is covered with layout dye or a permanent marking pen so the outline scribe marks are more easily seen. I punch the mounting holes rather than drilling. The piece fabricated in this example is different than the bellow separator frame corners, but the layout and cutting process is the same. The corners would require the additional bending steps to complete the process.
Logged
I'm squeezin' and they're wheezin': old junker boxes

Stockaryd

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 255
Re: Parts !!
« Reply #30 on: July 19, 2016, 10:11:34 AM »

Henry, Dino Baffetti use these on their ART 25 model organetto, still in production..
I purchased some from them earlier this year.

Edited to add photo (I hope...)
If you are looking for these organetto style metal corners: I have more than I need.

Thanks for the offer, but I,m having some made up in brass by a local metalwork teacher !!.


How did they turn out?    I tried a nibbler, but it was no good  (. . or I am no good?   ) 
Logged
Hohner Corso, Hohner Erica, Emmanuel Pariselle, Gessner,   Koch,   Mariotti,    "China  NoName",   4 Toy,     -and now some more

Henry Piper

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 368
Re: Parts !!
« Reply #31 on: July 19, 2016, 03:33:55 PM »

Stockaryd...... My friend was not allowed to use his schools facilities for private work, so couldn't make them for me, but fortunately, melnet member "Tombom", was able to supply me with some spare corners he had which I shall be using.
HP
Logged
From Ottery St Mary Devon. Currently Playing Dino Baffetti BP2 in D/G, Hohner Student 1 P.A conversion  in D/G,  Hohner 3515 Pre-Pokerwork in A/D,   2 row "Beaver Brand" in Bb/Eb, Hohner Pre- Erica in G/C .  Single row permanent 4 voice, 4 bass in C from old Hohner single row and bits of a cheap Cajun box !!,

TomBom

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 471
Re: Parts !!
« Reply #32 on: October 14, 2016, 08:40:34 PM »

Henry, Dino Baffetti use these on their ART 25 model organetto, still in production..
I purchased some from them earlier this year.

Edited to add photo (I hope...)
In case anyone is interested: a  box parts supplier from Germany sellsthese organetto style corners.
http://www.stringsandboxes.de/epages/es117831.sf/en_GB/?ViewObjectPath=%2FShops%2Fes117831_stringsandboxes%2FProducts%2FZIB-GO
Logged

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Parts !!
« Reply #33 on: October 14, 2016, 10:41:23 PM »

Unexpectedly, Charlie Marshall has those too. They are the exact same corners that were used on the original Castagnari Sander.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Henry Piper

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 368
Re: Parts !!
« Reply #34 on: October 15, 2016, 10:48:14 AM »

Unexpectedly, Charlie Marshall has those too. They are the exact same corners that were used on the original Castagnari Sander.

They are also exactly like the ones I got from "Tombom",........For which I thank him !!
Logged
From Ottery St Mary Devon. Currently Playing Dino Baffetti BP2 in D/G, Hohner Student 1 P.A conversion  in D/G,  Hohner 3515 Pre-Pokerwork in A/D,   2 row "Beaver Brand" in Bb/Eb, Hohner Pre- Erica in G/C .  Single row permanent 4 voice, 4 bass in C from old Hohner single row and bits of a cheap Cajun box !!,

John MacKenzie (Cugiok)

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2360
  • Fettling... Learning to reed and right.
Re: Parts !!
« Reply #35 on: October 15, 2016, 02:07:57 PM »

One wonders how much dies would cost. That could be stamped out in one operation, then folded to shape with a second die.

Sir John
Logged
There is no beginning to my talent :)



: Hohner Club Modell 1. Bb/Eb, de-clubbed : Early Hohner Pressed Wood A/D : 1930's Varnished wood G/C:  Hohner Erika C/F: Bandoneon tuned D/G Pressed wood: Koch F/Bb; G/C Pre Corso
Pages: 1 [2]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal