Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: How to remove the left-hand thirds?  (Read 4085 times)

0 Members and 1 Guest are viewing this topic.

PowersForGood

  • Member
  • *
  • Offline Offline
  • Posts: 19
How to remove the left-hand thirds?
« on: July 11, 2016, 01:56:47 AM »

Okay, before everyone jumps on me and tells me to use the search function, I did do so and didn't find the answer I was looking for. If this question has already been answered please direct me to a link and I'll be most grateful.

I play Irish traditional music on a Castagnari Dinn III in BC, with the standard factory setup on the left hand which includes the thirds. For several years I've been playing with just the right hand and now I want to start learning the left hand. I've received advice from several sources, including Damien Connely''s tutor, that I ought to have the 3rd removed (blocked) on the left hand before I start. Is this something I can do by myself, and if so how? Is this easily reversible? I've seen various partial explanations on other threads, but nothing really clear and comprehensive.

I also understand that Castagnari sells the same accordion with an optional switch to turn the thirds on and off. I wish I had ordered the box with that feature installed, but didn't. Are there other makers / repairers who could install such a device for me without me having to send the box all the way back to Castagnari?

Thanks sincerely,
Chris
« Last Edit: July 11, 2016, 02:23:04 AM by PowersForGood »
Logged

AirTime

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 979
Re: How to remove the left-hand thirds?
« Reply #1 on: July 11, 2016, 02:56:59 AM »

I had a Dinn III - but a DG not a BC. If I remember correctly, the thirds reeds were all placed on a single reed block. In any case they were quite easy to identify & it was easy to cut a small piece of tape & stick it across the opening in the reed block thereby blocking off each third reed. Removing the tape later is straightforward (best to use a tape that doesn't leave any kind of residue when removed.
Logged
1920's BbEb Hohner; 1920's  AD Koch; 1910 (?) One-row Hohner in D,  1910's GCB Maga Ercole; ; AD 1950's Pistelli, CF Sandpiper, CF Preciosa, BbEb Preciosa.

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: How to remove the left-hand thirds?
« Reply #2 on: July 11, 2016, 08:33:16 AM »

I had a Dinn III - but a DG not a BC. If I remember correctly, the thirds reeds were all placed on a single reed block. In any case they were quite easy to identify & it was easy to cut a small piece of tape & stick it across the opening in the reed block thereby blocking off each third reed. Removing the tape later is straightforward (best to use a tape that doesn't leave any kind of residue when removed).

Yes - don't be tempted to use masking tape. It can leave sticky residue and if left in place for a long time it can rip off slivers of wood from the reed block when it is eventually removed.

Diatonix's recommendation of thin paper across the pallet board openings is a good one.

NB: for others reading this - the original question concerns a Castagnari. The recommendations so far are for chord blocks where the thirds reeds are mounted on one side of the chord reed block. Many Italian-built boxes use this arrangement. However it does not normally apply to Hohners where the thirds push and pull reeds are not usually in the same location. In this case you have to silence each individual reed by using tape (Scotch 'Magic Tape' is best) placed over the reed tongue (push reeds) or over the valve (pull reeds).


Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

playandteach

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3526
  • Currently a music teacher in a high school.
Re: How to remove the left-hand thirds?
« Reply #3 on: July 11, 2016, 10:36:57 AM »

Thanks for this. I was just searching for how to do it for the Hohner Erika.
Logged
Serafini R2D2 GC, Serafini GC accs 18 bass

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: How to remove the left-hand thirds?
« Reply #4 on: July 11, 2016, 11:50:34 AM »

Thanks for this. I was just searching for how to do it for the Hohner Erika.

Here's a diagram showing the interior of the LH end of a Hohner Pokerwork. The view is as if you were looking down on the ends of the reed block. The blue/green rectangles indicate the ends of the aluminium reed plates and the dotted lines show the edges of the reed blocks and the outline of the pallets/openings on the underlying pallet board.

In the interests of clarity, the slots in the reed plates, the reed tongues and valves are not shown. However, the pitches and schematic locations of the various reeds tongues are shown. The thirds in the various chords are marked with 'X'.

You can see that there is only one reed plate which has the thirds on both push and pull. In this case blocking off the reed chamber opening would silence the thirds. In all other cases the third X reed shares the reed plate with either the tonic or the fifth note in the chord. For these, blocking off the reed chamber opening would also silence the tonic or the fifth, so instead, the third X reed tongue needs to be silenced by a strip of Magic Tape applied directly over the reed tongue (push reeds) or directly over the valve (pull reeds).

The diagram layout is not the same for all Hohners; there are usually slight differences from one instrument to another, so you would need to test each reed in turn to see where it is located and what part it plays in the chords. Then I would recommend constructing a diagram similar to mine for your particular instrument.
« Last Edit: July 11, 2016, 11:59:13 AM by Steve_freereeder »
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

PowersForGood

  • Member
  • *
  • Offline Offline
  • Posts: 19
Re: How to remove the left-hand thirds?
« Reply #5 on: July 11, 2016, 01:03:05 PM »


Diatonix's recommendation of thin paper across the pallet board openings is a good one.


Was this posted in this thread? If so it seems to have disappeared. Could you elaborate?

Also, what sort of tape would be considered to be suitably residue-free? I'm based in the USA.
Logged

Thrupenny Bit

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 7232
  • happily squeezing away in Devon
Re: How to remove the left-hand thirds?
« Reply #6 on: July 11, 2016, 01:08:30 PM »

If you want the option of thirds in for some tunes, out for others,  several melodeon fettlers on this forum are able to retro-fit a stop. You don't need to return it to Castagnari.
Q
Logged
Thrupenny Bit

I think I'm starting to get most of the notes in roughly the right order...... sometimes!

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: How to remove the left-hand thirds?
« Reply #7 on: July 11, 2016, 01:13:14 PM »


Diatonix's recommendation of thin paper across the pallet board openings is a good one.


Was this posted in this thread? If so it seems to have disappeared. Could you elaborate?

No, it wasn't posted here. Diatonix (a respected melodeon builder) just mentioned the technique in passing. Open up the box and remove the reed blocks so you can see the pallet board underneath with its openings. It will become obvious what needs doing.

Quote
Also, what sort of tape would be considered to be suitably residue-free? I'm based in the USA.
As mentioned, an ordinary thin paper strip will be fine; it doesn't need to be sticky, as it will be held in place sandwiched between the reed block openings and the pallet board. If you really must use adhesive tape, the sticky part of post-it notes is good - trim to size with scissors. Or use Scotch/3M Magic Tape.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

PowersForGood

  • Member
  • *
  • Offline Offline
  • Posts: 19
Re: How to remove the left-hand thirds?
« Reply #8 on: July 11, 2016, 02:47:58 PM »

Much appreciated. Thank you.
Logged

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: How to remove the left-hand thirds?
« Reply #9 on: July 11, 2016, 03:23:41 PM »

Okay, before everyone jumps on me and tells me to use the search function, I did do so and didn't find the answer I was looking for. If this question has already been answered please direct me to a link and I'll be most grateful.

Just some advice about the search function, it's always best to use the Melnet 'Google Search' rather than 'Standard Search'. Both are in the the blue menu strip below the main banner header. If you type 'tape off thirds' (without quotes) in the Google Search box, it should return many relevant threads. There are several pages of them!

Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

vof

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 221
Re: How to remove the left-hand thirds?
« Reply #10 on: July 11, 2016, 04:18:41 PM »

If you really must use adhesive tape, the sticky part of post-it notes is good - trim to size with scissors.

Seconded.

V
Logged
Vince O'Farrell
Dino BPII; Hohners: red Erica G/C; couple of 1040s in C and G project boxes.

PowersForGood

  • Member
  • *
  • Offline Offline
  • Posts: 19
Re: How to remove the left-hand thirds?
« Reply #11 on: July 11, 2016, 05:03:42 PM »

Okay, before everyone jumps on me and tells me to use the search function, I did do so and didn't find the answer I was looking for. If this question has already been answered please direct me to a link and I'll be most grateful.

Just some advice about the search function, it's always best to use the Melnet 'Google Search' rather than 'Standard Search'. Both are in the the blue menu strip below the main banner header. If you type 'tape off thirds' (without quotes) in the Google Search box, it should return many relevant threads. There are several pages of them!

Great advice. Thank you. I'll take a look and make sure to use the Google Search function from now on.
Logged

PowersForGood

  • Member
  • *
  • Offline Offline
  • Posts: 19
Re: How to remove the left-hand thirds?
« Reply #12 on: July 11, 2016, 08:22:05 PM »

Thanks everyone. I did it with paper strips, as recommended. It was super easy and very straightforward.
Logged

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: How to remove the left-hand thirds?
« Reply #13 on: July 11, 2016, 11:08:00 PM »

Thanks everyone. I did it with paper strips, as recommended. It was super easy and very straightforward.

Excellent! Pleased it worked out so well for you.  (:)
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

papawemba

  • Member
  • *
  • Offline Offline
  • Posts: 12
Re: How to remove the left-hand thirds?
« Reply #14 on: January 23, 2018, 08:55:58 AM »

Very informative thread as I tried to disable third by putting tape on those hole...and it didn't sound as expected.
Now I know why  :'(

It is on a Hohner Morgane but then I have to find the third for each push/pull and tape the reed...
If someone could post a picture of a taped reed ? Just to see the good way to do it :-)

Thank you !
Nicolas
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal