Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: 1-row building questions  (Read 3555 times)

0 Members and 1 Guest are viewing this topic.

tirpous

  • Hero Member
  • *****
  • Online Online
  • Posts: 1403
1-row building questions
« on: July 19, 2016, 02:47:50 PM »

Making -slow- progress on my 1-row ('Cajun') building project.  If anyone has information on the following, it would be very much appreciated:     

On the keyboard, what would be a suitable material for the metal rods connecting the wooden keys to the flappers ?  And how is the rod attached to the key ?

Are there any ready-made buttons available for the bass side growl-box or am I supposed to make my own from scratch ??     

Thanks!

 
Logged

mr hohner

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 189
  • K.BLAND Melodeons
Re: 1-row building questions
« Reply #1 on: July 19, 2016, 02:51:49 PM »

Look at pictures of them and you will see how the rod is attached to the key, on the one I made I drilled a hole on the button lever and glue a metal rod to act as a pallet arm.
Logged
Castagnari Studio D/G, Serenelli D/G, Hohner Pokerwork D/G, Castagnari Lilly D/G , Sandpiper Dublin II G/C, Serenelli Silyvia G/Acc

tirpous

  • Hero Member
  • *****
  • Online Online
  • Posts: 1403
Re: 1-row building questions
« Reply #2 on: July 19, 2016, 03:03:53 PM »

Well, I have this picture showing one method of attachment, but I don't understand what I see !!  :(

(from a Pariselle course - picture seen on this forum I think, thanks to the poster)

Logged

blafleur

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 530
Re: 1-row building questions
« Reply #3 on: July 19, 2016, 06:47:02 PM »

I use 3 different rods for my arms, depending on aesthetics-aluminum, brass, or copper.  It needs to be softer alloys to allow bending without being fragile.  I drill a hole in my rocker arms, then insert the rod with an inch or so sticking out the bottom, then flatter that bottom part with a hammer, then hammer it back in. The flat part locks it in place.  Then I bend the curves and hammer the flats for the screws.

For me, the keyboard is the most challenging part.  Expect to be frustrated some.  I've got a few pics that may help you here:
http://www.lansegriseaccordions.com/buildproc.htm

tirpous

  • Hero Member
  • *****
  • Online Online
  • Posts: 1403
Re: 1-row building questions
« Reply #4 on: July 20, 2016, 11:14:36 PM »

Thanks Bryan.  I have 2 types of 'likely' rods already, so will experiment with your method and see how it goes.  The pictures will be a great help (not just for the keyboard, btw !)
« Last Edit: July 28, 2016, 08:17:33 PM by tirpous »
Logged

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: 1-row building questions
« Reply #5 on: July 21, 2016, 01:00:10 AM »

Well, I have this picture showing one method of attachment, but I don't understand what I see !!  :(

(from a Pariselle course - picture seen on this forum I think, thanks to the poster)
The photo is mine, which I posted mainly to show the felt buffer inside the keyboard assembly. Bryan's photos and explanations are far more informative with respect to making the wooden key lever and aluminium pallet arm.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: 1-row building questions
« Reply #6 on: July 21, 2016, 07:50:57 AM »

I don't recommend copper, it work hardens and breaks. I have had to replace more of those than I can say.

 I use aluminum and paint it with colored transparent lacquer I made to match the copper.

 I recommend  getting a grade of ductile aluminum rod, some is bendable and some is hard as hell and brittle, and there is everything in between.
Some is heat treatable so you may be able to find something that is ductile and formable, then could be tempered after it was formed/bent. https://www.metalsupermarkets.com/7-things-consider-choosing-aluminum-grade/
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997

Psuggmog Volbenz

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 318
    • musical whimsy
Re: 1-row building questions
« Reply #7 on: July 21, 2016, 08:34:31 AM »

I like silicon bronze rod. It cam be annealed and worked cold and also forged while red hot. I have made very tight bends and such shapes as scrolls and alternating spirals when forging red hot rod stock.
Motorcycle spokes would also work. They come on stainless steel and carbon steel varieties. I don't like using aluminium or copper for this application, but most of the contemporary makers seem to be using these metals.
« Last Edit: July 21, 2016, 08:37:38 AM by Psuggmog Volbenz »
Logged
I'm squeezin' and they're wheezin': old junker boxes

tirpous

  • Hero Member
  • *****
  • Online Online
  • Posts: 1403
Re: 1-row building questions
« Reply #8 on: July 28, 2016, 03:55:44 AM »

Quote
Are there any ready-made buttons available for the bass side growl-box or am I supposed to make my own from scratch ??

Just to answer my own question #2 that went under the radar so far in this thread: after rechecking on Charlie Marshall's site I think some of his buttons could be used, such as http://www.cgmmusical.co.uk/CGM_Musical_Services/Treble_Bass_Buttons.html#29  .

Also, I went to a local store, Lee Valley Tools, for router and drill bits I need to make the keyboard.  I noticed (and bought) 'screw covers' that look like they could make adequate bass-side buttons in the 15 mm size.  http://www.leevalley.com/US/hardware/page.aspx?p=40095&cat=3,41306,41316   .  I've discovered since this is exactly what is used on my big-name 1-row.
Logged

blafleur

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 530
Re: 1-row building questions
« Reply #9 on: July 28, 2016, 12:17:54 PM »

There are some ready made bass buttons for Cajun style boxes, silver only. I think right now they are only available from Junior Martin in Lafayette, La. But also used the ones you posted a pic of from Lee Valley.  I've also made my own from ebony.

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: 1-row building questions
« Reply #10 on: July 28, 2016, 10:52:11 PM »

I use steel rods, harder to work but more durable.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

tirpous

  • Hero Member
  • *****
  • Online Online
  • Posts: 1403
Re: 1-row building questions
« Reply #11 on: July 28, 2016, 11:01:34 PM »

Thanks Bryan.  Apparently, early Québec makers used pennies to make their own bass buttons.  If I remember correctly this was mentioned as a 'did you know?' in this display at the Musée de l'accordéon in Montmagny.  I prefer the ebony idea.

Logged

tirpous

  • Hero Member
  • *****
  • Online Online
  • Posts: 1403
Re: 1-row building questions
« Reply #12 on: August 22, 2016, 12:48:04 AM »

On the road to frustration  ;).  Drilled a test key to try fit in keyboard blank and adjust spring tension.
Logged

tirpous

  • Hero Member
  • *****
  • Online Online
  • Posts: 1403
Re: 1-row building questions
« Reply #13 on: August 22, 2016, 01:37:46 AM »

Curves along the road.  Makeshift bending jig loosely based on Bryan's.  Without his advice I would still be scratching my head.

I tried to imitate the bends on my old Eagle Brand Professional.  To my surprise, it worked rather well.  Now I have to decide: do I want to try and make 10 more like that, or settle for a simpler stairstep shape.  Not sure there is any functional advantage to the more complex shape.

This was done with mild steel (I think) practice rods I got for free from my dad.  I also have german silver (same material as guitar fretwire) welding rods, but the mild steel worked so well I think I will use it for my production run (of 10!).
Logged

Harmonicatunes

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 261
    • Harmonicatunes
Re: 1-row building questions
« Reply #14 on: August 23, 2016, 03:47:59 AM »

Very nice. Please keep posting photos as you progress through the various stages.
Logged
Harmonica Player
Just starting with the Box

Psuggmog Volbenz

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 318
    • musical whimsy
Re: 1-row building questions
« Reply #15 on: August 27, 2016, 04:06:00 AM »

Great to see your progress. For most of the steps involved, they are several approaches which lead to success. Setting  up jigs or fixtures for making multilpe melodeons may not be worth the time investment if you are only planning to make one. Have you spent any time at the boxbuilders yahoo group? Good information, plans and photos from several have made accordions without prior experience.
Logged
I'm squeezin' and they're wheezin': old junker boxes
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal