Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2 3   Go Down

Author Topic: Reed Waxing for the Mechanically Challenged  (Read 10824 times)

0 Members and 1 Guest are viewing this topic.

baz parkes

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1894
    • All Blacked Up
Reed Waxing for the Mechanically Challenged
« on: July 28, 2016, 02:57:16 PM »

Hi all
Just picked up my teeny weeny Dino for a few tunes, and nothing in the bottom 3 notes (chin end)... :'(

Managed to take the end off without hurting it or myself and the reed blocks have come loose.  There seems to be sufficient wax around the frame to hold them back in.  How easy would it be to do so myself, or should I leave it to someone who knows what they're doing?

I have access to a soldering iron...but little else.

ta

Inept of Mobberley...
Logged
On the edge of Cheshire's Golden Triangle, apparently...

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Reed Waxing for the Mechanically Challenged
« Reply #1 on: July 28, 2016, 03:18:42 PM »

I would encourage you to have a go! Faint heart/fair lady and all that. I tried the soldering iron thing on one of my "Firewood" brand 1-rows, and was pleasantly surprised at the result.
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Reed Waxing for the Mechanically Challenged
« Reply #2 on: July 28, 2016, 03:29:58 PM »

It's much easier to advise if we can agree on terminology:

You said "the reed blocks have come loose".  Reed blocks are the wooden structures which usually have a row of reed plates on either side.  I suspect you meant reed plates.

It is much easier to do a good job if you first remove all the old wax and and then use fresh wax. Its also much easier if you have a temperature controlled soldering iron.  Are you aiming for a long term fix, or is it just a matter of getting it working quickly?  If the latter just leave the old wax and re-melt enough of it so the reed plates don't fall out.  take care not to get wax on the valves or reed tongues.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: Reed Waxing for the Mechanically Challenged
« Reply #3 on: July 28, 2016, 03:33:56 PM »

Baz, if you're not happy waxing and it is a skill and can look horrible. Don't ask but I know, there is always the alternative that Immanuel Pariselle uses and that is adhesive tape and screws. I can't remember the name of it now but CGM sells it and I'm sure Theo will remember.
  Just imagine a class full of newbies waxing reeds!! It would be like a scene from Hamlet... Or the Comedy of Errors. Hope that helps.
« Last Edit: July 28, 2016, 03:35:56 PM by Nick Collis Bird »
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”

baz parkes

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1894
    • All Blacked Up
Re: Reed Waxing for the Mechanically Challenged
« Reply #4 on: July 28, 2016, 03:45:53 PM »

  Just imagine a class full of newbies waxing reeds!! It would be like a scene from Hamlet... Or the Comedy of Errors. Hope that helps.

Always happy with a bit of the bard as a reference point... :|glug
Logged
On the edge of Cheshire's Golden Triangle, apparently...

baz parkes

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1894
    • All Blacked Up
Re: Reed Waxing for the Mechanically Challenged
« Reply #5 on: July 28, 2016, 03:49:15 PM »

It's much easier to advise if we can agree on terminology:

You said "the reed blocks have come loose".  Reed blocks are the wooden structures which usually have a row of reed plates on either side.  I suspect you meant reed plates

You suspect correctly sir...this is why I leave the black art of melodeon fixing to those wot can...

I never enjoyed messing about with cars or motorbikes either... :|bl
Logged
On the edge of Cheshire's Golden Triangle, apparently...

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Reed Waxing for the Mechanically Challenged
« Reply #7 on: July 28, 2016, 04:20:55 PM »

Lester, when I see that video I always think the iron is far too hot.  Do you still use the same method?
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Reed Waxing for the Mechanically Challenged
« Reply #8 on: July 28, 2016, 04:41:56 PM »

Reed Waxing for the Mechanically Challenged

I was hugely surprised by the size if the weights on the 3rd and 4th reeds in your video. How many notes down would they take the tuning? And, doesn't all that extra weight put an enormous strain on the reed itself, leading to breakage being much more likely? (Sorry if this is thread-drift.)
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Reed Waxing for the Mechanically Challenged
« Reply #9 on: July 28, 2016, 04:42:05 PM »

Lester, when I see that video I always think the iron is far too hot.  Do you still use the same method?
I have a dimmer in line to the iron now to cool it down.

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Reed Waxing for the Mechanically Challenged
« Reply #10 on: July 28, 2016, 04:43:28 PM »

Reed Waxing for the Mechanically Challenged

I was hugely surprised by the size if the weights on the 3rd and 4th reeds in your video. How many notes down would they take the tuning? And, doesn't all that extra weight put an enormous strain on the reed itself, leading to breakage being much more likely? (Sorry if this is thread-drift.)

They are the bass reeds from a D/G pokerwork and, like many bass reeds, they have brass weights to lower their tone.

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Reed Waxing for the Mechanically Challenged
« Reply #11 on: July 28, 2016, 06:28:50 PM »

Not unusual, then?
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Anahata

  • This mind intentionally left blank
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6767
  • Oakwood D/G, C/F Club, 1-rows in C,D,G
    • Treewind Music
Re: Reed Waxing for the Mechanically Challenged
« Reply #12 on: July 28, 2016, 07:36:00 PM »

Not unusual for low pitched reeds. Without the weights they'd be too big to fit in the box. It's the same in concertinas.
It doesn't make them break, but it can make them a little less responsive and I believe also prone to pitch changes with pressure, and not as loud as a full sized reed would be at the same pitch.
If you want to know what big bass reeds without weights sound like, listen to the basses on a Steirische Harmonika (100's of examples on YouTube)
Logged
Слава Україні !
Music recording and web hosting: www.treewind.co.uk
Mary Humphreys and Anahata: www.maryanahata.co.uk
Ceilidh band: www.barleycoteband.co.uk

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Reed Waxing for the Mechanically Challenged
« Reply #13 on: July 28, 2016, 07:50:26 PM »

Righty-ho! So, it's quite obvious that (what I imagined to be) large weights are a regular addition to bass reeds. Bearing that in mind, if I wanted to have one of my basses an octave lower, it might well be a reasonable thing to try?
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Grape Ape

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1209
Re: Reed Waxing for the Mechanically Challenged
« Reply #14 on: July 28, 2016, 09:02:23 PM »

Back on the topic of reed waxing, is there an advantage to using a soldering iron over the method shown on YouTube of Charlie Marshall using a paint brush and pot of melted wax? The latter seems easier to me, though neither method looks terribly difficult, at least not on the surface.

https://m.youtube.com/watch?v=q7-MUhBc1ho

Actually, upon review, Lester's method looks like it may be quicker and less messy...

Anyway, if these examples are of an "easy" method of waxing reeds, what does the not so easy way look like?  Is it done much differently makers?
« Last Edit: July 28, 2016, 09:07:20 PM by Grape Ape »
Logged

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Reed Waxing for the Mechanically Challenged
« Reply #15 on: July 28, 2016, 10:36:41 PM »

Here's the proper way to do it, although professional reed waxers do it at about ten times the speed with just a flat waxing spoon. (I'm sure there are videos somewhere).

https://www.youtube.com/watch?v=CTOKF6Ol6m4
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

tirpous

  • Hero Member
  • *****
  • Online Online
  • Posts: 1403
Re: Reed Waxing for the Mechanically Challenged
« Reply #16 on: July 28, 2016, 10:41:28 PM »

Another video from Diatonix who sometimes posts here:

https://www.youtube.com/watch?v=yjGaLwqrtOs
Logged

playandteach

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3526
  • Currently a music teacher in a high school.
Re: Reed Waxing for the Mechanically Challenged
« Reply #17 on: July 28, 2016, 11:16:24 PM »

I bought some little wax applicators (a small reservoir on a paint brush-like handle) used for batik. Put the was in, warm it up and pour. I just haven't ever got round to using them. They were dirt cheap and look useful.
Logged
Serafini R2D2 GC, Serafini GC accs 18 bass

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: Reed Waxing for the Mechanically Challenged
« Reply #18 on: July 28, 2016, 11:38:42 PM »

Charlie's method is OK, it works, but I think it would get tedious on a whole reedblock. You only have a small amount of wax to work with. A certain amount of care is needed when heating the wax, to avoid overheating it and to avoid setting it on fire. And spilling it, it's a b*gger to get off the cooker before your wife spots it.
I made a small pan from the end of a bean can with a bit of dowel as a handle, it was OK for what I needed.

I've used a soldering iron to re-flow around a couple of reed plates, I've not tried for anything bigger but you do need to manage the temperature of the iron to avoid too much smoke, and have good ventilation. The smoke is not nice stuff, and wherever you sit you can guarantee it will head straight for your nose and eyes unless you have decent ventilation, just the same as when soldering. Bear in mind that a new soldering iron, unless it has variable temperature, will run a fair amount hotter than an old one as the current lead-free solder has a higher melting point.
To reflow you can, if you're careful, avoid contact with the wax to just melt it locally.
This seems well suited for small and larger jobs, with care.

I've done just one reed block with a home made spoon, similar to the videos above. It worked quite well, although it took a couple of goes to get the pouring hole to a sensible size. But you need a decent pot of wax to dip the spoon and load it, so it's a bit cumbersome for just a small job, or a repair. And a bit of practice to get the wax temperature right, otherwise it doesn't flow nicely and hardens too quickly even though it looks OK in the pot. And you need to wipe off the surplus to avoid annoying drips.
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

Grape Ape

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1209
Re: Reed Waxing for the Mechanically Challenged
« Reply #19 on: July 29, 2016, 01:58:00 AM »

Am I crazy or does the "proper" way look just as simple- not necessarily easy, but no more involved/difficult than the other methods.  Now where does one find those nifty little spoons?
Logged
Pages: [1] 2 3   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal