Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2]   Go Down

Author Topic: Carbon Fiber Melodeon  (Read 7687 times)

0 Members and 1 Guest are viewing this topic.

Thrupenny Bit

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 7232
  • happily squeezing away in Devon
Re: Carbon Fiber Melodeon
« Reply #20 on: January 04, 2020, 08:25:01 AM »

There are very close analogies between wooden melodeons and steel bikes.
When first into mountain biking in the late '80's, all bar two manufacturers used steel. During the 90's it went over to aluminium. Essentially befcause it was easier to produce, the fact it failed catastrophically without warning and gave a harsh ride was irrelevant. It was easier to mass produce.
One of the top small 'garage' manufacturers but bike innovating  guru, Keith Bontrager said if steel had been discovered now, it would be the new wonder material.
I think the same thing can be said of wood for melodeons....
Q
Logged
Thrupenny Bit

I think I'm starting to get most of the notes in roughly the right order...... sometimes!

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: Carbon Fiber Melodeon
« Reply #21 on: January 04, 2020, 02:37:29 PM »

There are very close analogies between wooden melodeons and steel bikes.
When first into mountain biking in the late '80's, all bar two manufacturers used steel. During the 90's it went over to aluminium. Essentially befcause it was easier to produce, the fact it failed catastrophically without warning and gave a harsh ride was irrelevant. It was easier to mass produce.
One of the top small 'garage' manufacturers but bike innovating  guru, Keith Bontrager said if steel had been discovered now, it would be the new wonder material.
I think the same thing can be said of wood for melodeons....
Q

If you read J E Gordon's splendid books on Structures and Materials -- which includes glorious explanations of things like why you can't put a crease in an earthworm -- in the section on making things like lightweight boxes or panels with stiff walls where the criterion is stiffness/weight, wood comes out better than almost anything else -- and if you include the environmental and monetary cost of the material, way ahead of anything else...

Of course wood is a composite just like CFRP, the difference being that one was evolved by nature and the other created by man. As an example of nature's cleverness, the "old mariner's tale" that a spar or mask should be made from a complete piece of wood rather than a cut one turns out to be absolutely true, because trees grow with prestressed trunks and branches (tension in the middle, compression on the outside) which makes them a lot stronger than machined wood since wood is stronger in tension than compression -- it took man until the 20th century invention of prestressed concrete and toughened glass to come up with such ingenious solutions...
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

rileycat

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 429
Re: Carbon Fiber Melodeon
« Reply #22 on: January 04, 2020, 03:31:04 PM »

For what its worth, my wife's carbon fibre braced Hammered dulcimer is pretty light compared to her mighty Oakwood Receital and not too shabby for tone, either. Weight was the reason for the light-weight purchase.  Realistic comparison is hard, as the Oakwood has had 20+years playing, so is well 'seasoned' and has exceptional tone - time will tell!
Logged

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Carbon Fiber Melodeon
« Reply #23 on: January 27, 2020, 07:00:16 PM »

I'd have to agree that a lot of material eslections are made based on commercial (profit) considerations rather than choosing the best material for the job.  In the case of a CF racing bike, they are designed for a true race bikeand cannot withstand daily use on potholed roads.  I well remember when the Tour de France did a stage in Hampshire, one of my favourite cross country roads, little better than a farm track, became as smooth as a billiard table!

Much of the technology of composite choice has been extensively trialled and developed in yacht construction.  Early composites saw a balsa core being skinned with more and more specialist epoxy infusions.  The current a la mode technique is a closed cell foam core with CF skins, though some advocate only using CF for reinforcement panels as it cab be rather brittle.

I would have thought that a similar construction would suit a box, though there would have to be wood inserts to screw assemblies to.  Unfortunately there are considerable tooling costs which not sit well with our niche market.  Now if the Pokerwork had been built this way...  Mind you, the Poker work must already be the lightest 2 row production box!

Rob.
Logged

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: Carbon Fiber Melodeon
« Reply #24 on: January 28, 2020, 11:23:06 AM »

I'd have to agree that a lot of material eslections are made based on commercial (profit) considerations rather than choosing the best material for the job.  In the case of a CF racing bike, they are designed for a true race bikeand cannot withstand daily use on potholed roads.  I well remember when the Tour de France did a stage in Hampshire, one of my favourite cross country roads, little better than a farm track, became as smooth as a billiard table!

Much of the technology of composite choice has been extensively trialled and developed in yacht construction.  Early composites saw a balsa core being skinned with more and more specialist epoxy infusions.  The current a la mode technique is a closed cell foam core with CF skins, though some advocate only using CF for reinforcement panels as it cab be rather brittle.

I would have thought that a similar construction would suit a box, though there would have to be wood inserts to screw assemblies to.  Unfortunately there are considerable tooling costs which not sit well with our niche market.  Now if the Pokerwork had been built this way...  Mind you, the Poker work must already be the lightest 2 row production box!

Rob.

Complex materials/construction like cored/skinned composite panels are used in cases where either strength or light weight are absolutely critical and cost/manufacturing difficulty isn't -- for example aerospace, racing yachts/bikes/cars, tennis rackets/golf clubs, loudspeaker cones. They also don't work when thin, they're light but thick due to the low density core. The other problem with materials like this is that the material itself is great but you tend to need complex and expensive (and sometimes heavy) fixings to get the stresses in and out of the strong materials, and the end result can be easily damaged if abused and very difficult (or impossible) to repair afterwards. Again, J E Gordon's books are the bible on this for the layman -- and great reading even for somebody like me who studied structures and materials at university.

None of this really applies to melodeon cases; they're not very highly stressed, don't have to be super strong or weigh almost nothing, lots of things have to be fixed to them, being not too thick matters more than being super light, and a complex solution that takes many hours to build and be very difficult to repair if damaged is not going to be commercially viable -- for all these reasons wood is an excellent solution for them, and has the advantage of looking nice :-)
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

David Summers

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 159
Re: Carbon Fiber Melodeon
« Reply #25 on: January 28, 2020, 07:12:35 PM »

One of the top small 'garage' manufacturers but bike innovating  guru, Keith Bontrager said if steel had been discovered now, it would be the new wonder material.
Well I say titanium would be the new wonder material, rides like steel, does not rust, and isn't too heavy.

Steel rusts (at least the grade you use in bikes, you wouldn't want stainless), and bikes are out in the environment, and paint gets knocks - and this is the death of many steel frames. Also does anyone remember steel rims? Yes they lasted, but were terrible, no good for braking.

Titanium fault though is its very expensive, and very hard to work with. Think almost all titanium you see either comes from America or from Russia, as they are the only countries with expertise in working it, due to their aerospace industry.
Logged

Thrupenny Bit

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 7232
  • happily squeezing away in Devon
Re: Carbon Fiber Melodeon
« Reply #26 on: January 28, 2020, 07:48:21 PM »

I think you are right but it illustrates that no material is perfect.
Indeed steel rusts, though the grades used for bikes limits that significantly. The ride characteristics of a steel frame cant be beaten, lively, springy and a dream to ride.
Aluminium is easier to manufacture industrially, doesn't rust but has a ride characteristic that has no give and beats you up unless it's a full suspension bike.
Titanium has the ride characteristics of steel and can trade off super strength against weight, so long as the welding is up to it, which has been problematic in the past. It also has legendary price tags.

I think similar parallels are drawn with melodeons.
Wood might not be perfect but what is?
Q
Who's next steel mountain bike frame became a melodeon!
Logged
Thrupenny Bit

I think I'm starting to get most of the notes in roughly the right order...... sometimes!

richard.fleming

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 556
Re: Carbon Fiber Melodeon
« Reply #27 on: January 29, 2020, 07:52:49 AM »

I think Doug Briggs may be the sort of person whose interests in materials and engineering and so forth may lead him in directions another melodeon builder might not take. Since many melodeon players seem to have similar interests this may work for him, whereas  were he a violin maker I'm not so sure it would work so well.
« Last Edit: January 29, 2020, 12:13:45 PM by richard.fleming »
Logged
Old Paolo Sopranis in C#/D and D/D#

Thrupenny Bit

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 7232
  • happily squeezing away in Devon
Re: Carbon Fiber Melodeon
« Reply #28 on: January 29, 2020, 08:17:05 AM »

Yes I think you're right.
Briggs seems to be pushing the envelope.
Also Kay Albrecht is exploring things along similar lines.
Q
Logged
Thrupenny Bit

I think I'm starting to get most of the notes in roughly the right order...... sometimes!

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: Carbon Fiber Melodeon
« Reply #29 on: January 30, 2020, 02:28:00 AM »

Yes I think you're right.
Briggs seems to be pushing the envelope.
Also Kay Albrecht is exploring things along similar lines.
Q
Briggs is certainly pushing the price envelope -- his carbon fibre melodeon costs about 10k more than his wooden ones IIRC...
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

Thrupenny Bit

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 7232
  • happily squeezing away in Devon
Re: Carbon Fiber Melodeon
« Reply #30 on: January 30, 2020, 08:15:17 AM »

.... and his wooden ones are more than enough!!
Logged
Thrupenny Bit

I think I'm starting to get most of the notes in roughly the right order...... sometimes!
Pages: 1 [2]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal