Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Timber identification  (Read 1647 times)

0 Members and 1 Guest are viewing this topic.

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Timber identification
« on: August 06, 2016, 09:33:31 PM »

Any idea what this key is made of? There are two types of wood - the hidden lever is very close grained, the key top is lighter in colour and with a less dense grain. It is a PA key...but I'm hoping as it's about construction I can get away with posting the Q here...

blackdot1234

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 152
Re: Timber identification
« Reply #1 on: August 06, 2016, 09:45:01 PM »

The part containing the spring is beech but not sure on upper part
Logged

John MacKenzie (Cugiok)

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2360
  • Fettling... Learning to reed and right.
Re: Timber identification
« Reply #2 on: August 06, 2016, 09:52:40 PM »

Upper part looks like spruce to me.

Sir John
Logged
There is no beginning to my talent :)



: Hohner Club Modell 1. Bb/Eb, de-clubbed : Early Hohner Pressed Wood A/D : 1930's Varnished wood G/C:  Hohner Erika C/F: Bandoneon tuned D/G Pressed wood: Koch F/Bb; G/C Pre Corso

Gromit

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 588
Re: Timber identification
« Reply #3 on: August 06, 2016, 11:45:34 PM »

The pink(ish) lower piece looks like Beech, top could be any light timber - Ash or spruce perhaps?
Logged

melodeon

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1732
Re: Timber identification
« Reply #4 on: August 07, 2016, 01:03:50 AM »

As [posted, bottom is beech.

Top is not ash...
Perhaps Spruce, pine....   fuzzy surface is the indicator along with lack of definable grain
Logged

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Timber identification
« Reply #5 on: August 07, 2016, 06:06:53 AM »

I agree the lower part is beech - I have a feeling the upper part may be lime (aka linden), as the grain in spruce would be more prominent. Another possibility is poplar (used in making matches), which, like lime, has very little discernible grain.
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Timber identification
« Reply #6 on: August 07, 2016, 09:12:19 AM »

If you need a replacement a have a large box of new old stock piano accordion keys.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Timber identification
« Reply #7 on: August 07, 2016, 09:45:09 AM »

Thanks. I don't need a placement right now but I will bear it in mind. As an aside, the keyboard has 2 spindles/axles, divided into two halves, pushed in from both sides of the kb. I quite like this idea.

playandteach

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3526
  • Currently a music teacher in a high school.
Re: Timber identification
« Reply #8 on: August 07, 2016, 11:02:47 AM »

Thanks. I don't need a placement right now but I will bear it in mind. As an aside, the keyboard has 2 spindles/axles, divided into two halves, pushed in from both sides of the kb. I quite like this idea.
I had a Galotta with 2 spindles, it did cause problems as they wanted to lift in the middle of the keyboard, binding the keys at that point. I bought it on ebay when I had no idea what I was doing. Complained and got a partial refund, found a local repairer (Theo), had it fixed, learnt some tunes, part exchanged it for the Brandoni, went back to Theo to have the tuning dried out, saw all the melodeons, hired one. Bought one. Now look at me! (you can interpret that last comment anyway you like, except for pride)
Logged
Serafini R2D2 GC, Serafini GC accs 18 bass

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Timber identification
« Reply #9 on: August 07, 2016, 11:29:02 AM »

As an aside, the keyboard has 2 spindles/axles, divided into two halves, pushed in from both sides of the kb. I quite like this idea.

playandteach has beaten me to it, but that does sound to me like trouble waiting to happen. Boxes are built largely from organic materials (ie wood!) so fine engineering tolerances, such as would be required to keep the two ends of a split axle in strict alignment, are simply not attainable. Add to that the atmospheric movement inherent in even the best seasoned timber and the inevitable wear where metal meets wood, and you'relooking at a potential problem.

Graham
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal