Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Converting a Corso to an Erica  (Read 2785 times)

0 Members and 1 Guest are viewing this topic.

Don Taylor

  • New Starter
  • Offline Offline
  • Posts: 2
Converting a Corso to an Erica
« on: August 11, 2016, 03:16:39 PM »

First post so apologies if I have transgressed any written or unwritten laws.

I do not play Melodeon but I have an opportunity to buy a Hohner 21-button Corso C/F for not much money - maybe I will buy it to put a toe in the water. But ...

Coming from the concertina world I am not sure that I can tolerate the Musette sound for long so is it reasonable to disable one of the voices so that it sounds like an Erica.  If so, is this easy to do in a reversible  way - or even for me to be able to add a stop for the lower voice.

Thx.  Don.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Converting a Corso to an Erica
« Reply #1 on: August 11, 2016, 03:31:31 PM »

You can easily disable one voice by putting a strip of paper or adhesive tape under the reeds for the voice you want to silence.  Otherwise you could have the tuning altered to bring the three reeds closer and tone down or even eliminate the tremolo.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

diatonix

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 622
Re: Converting a Corso to an Erica
« Reply #2 on: August 11, 2016, 04:39:10 PM »

To make it sound similar to an Erica you have to disable the block in the middle (3 and 4). Don't silence the 440Hz voice (1 and 5): the result would be horrible.
Logged

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Converting a Corso to an Erica
« Reply #3 on: August 11, 2016, 08:38:14 PM »

Musette is a bit of an acquired taste... Though careful tuning can give stunning results.

Malcolm Clapp

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1119
  • Loving my Hohner-reeded wet MMM CastaTommy
Re: Converting a Corso to an Erica
« Reply #4 on: August 12, 2016, 12:05:44 AM »

Don't silence the 440Hz voice (1 and 5): the result would be horrible.

Horrible? All depends how much offset from A440 the plus and minus reeds are tuned to. At around plus/minus 10 cents at A, could be very effective, though Hohner factory tuning is around twice that. Even then, I've found that it is a setting that can be very attractive for slower tunes, though I wouldn't want to play on it all night.....

Whatever set is silenced, the end result will give you a potentially Erica sound and range from a larger, heavier and more cumbersome box. I can't honestly see the point when Ericas are easily available. If the buying price is so attractive, maybe look at selling the Corso on and putting the money towards an Erica.

My 10c worth...

Logged
Tuner/repairer, now retired.

playandteach

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3526
  • Currently a music teacher in a high school.
Re: Converting a Corso to an Erica
« Reply #5 on: August 12, 2016, 12:34:39 AM »

I am not sure that I can tolerate the Musette sound for long so is it reasonable to disable one of the voices so that it sounds like an Erica.  If so, is this easy to do in a reversible  way - or even for me to be able to add a stop for the lower voice.

Thx.  Don.
I too find wide Musette tuning sounds like a sheep shouting in your face. Surprisingly with my Piano Accordion which I had 'remedied' to a swing tuning, there are lots of people who seem to like sheep. I don't know if it helps an unamplified box stand proud in an ensemble or just gives a nostalgic quality - but I just can't help but hit the pause button incredibly fast on youtube for wide musette tunings.
I do appreciate that taste is naturally subjective, but would like to ask whether wet tuning finds favour amongst a particular demographic. Is it geographic or age related in terms of those who like it?
Logged
Serafini R2D2 GC, Serafini GC accs 18 bass

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Converting a Corso to an Erica
« Reply #6 on: August 12, 2016, 01:20:11 PM »

For rumpy-pumpy English and Scottish tunes I like a wide musette. Fairly wide for Tex-Mex and Quebecois.
Narrow (swing tuned) for Continental stuff, Welsh and Northumbrian. Dry for Zydeco, Cajun and Irish.

This explains why I have so many boxes!
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Converting a Corso to an Erica
« Reply #7 on: August 15, 2016, 04:46:02 PM »

Here's a post wrt a musette accordion and the sound it can make, if you wanted to hear one....
http://forum.melodeon.net/index.php/topic,19175.0.html

Don Taylor

  • New Starter
  • Offline Offline
  • Posts: 2
Re: Converting a Corso to an Erica
« Reply #8 on: August 16, 2016, 01:44:54 AM »

Roger, thanks but I can't get Jimmy Shand out of my head whenever I hear that sound.

I know that Sir Jimmy was a fine musician, but he was on the telly far too often when I was a nipper.
Logged

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: Converting a Corso to an Erica
« Reply #9 on: August 16, 2016, 02:19:06 PM »

If you can get the box for little money and make it sound reasonable with a strip of paper, I would say go for it, it will get you going.

As Theo pointed out, a Corso's tuning can be tweaked to sound 'right' (where 'right' is a highly personal concept !) so if you decide to keep it after a while it could become a nice-sounding 3-voice box rather than a bulky 2-voice.  Are the keys of C/F appropriate for the type of music you play or people you play with ??

You mention adding a stop to remove the lower voice.  As far as I know a Corso has all 3 voices on the same octave (MMM) rather than 1 voice an octave lower than the 2 others (LMM).  And while a stop would be feasible, the money might be better spent on adjusting the tuning. 
Logged

george garside

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5401
Re: Converting a Corso to an Erica
« Reply #10 on: August 16, 2016, 08:46:58 PM »

I am one of those who like mmm musette and would not dream of altering a corso - - but then  to me  there is nothing better than the superb sound of a Shand Morino  or the 'poor mans shand morino' the hohner gaelic  is superb!

To me 'dry tuning' sounds like a trapped fart trying to find a way out!

 each to his own so to speak

george ;)
Logged
author of DG tutor book "DG Melodeon a Crash Course for Beginners".
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal