Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: New to Melodeons - need repair advice.  (Read 1817 times)

0 Members and 1 Guest are viewing this topic.

Dee J

  • Member
  • *
  • Offline Offline
  • Posts: 17
New to Melodeons - need repair advice.
« on: June 26, 2009, 03:59:36 PM »

Hi there.

Im new to this... I've just bought a melodeon. It's a Hohner 1140 single-row in G - 2 reeds per note (wet tuned I think is the right term - heavy vibrato). I'd like some advice please on fault diagnosis and sources of repair materials. On the treble side: 1) Some notes seem to only sound one reed (no vibrato). 2) One button yields a horrible rasping noise irrespective of bellows direction. On the bass side one of the chord buttons has a metallic rattle along with the note.

Inside - some of the valves (little flaps behind the reeds?) on the treble side seem to sit a little high (compared to others). Material apperars to be mylar in one or two layers - where can I get the right material, and what's it held in place with? On the bass side the valves look to be thin leather - and one in particular has dropped right away from the reed frame and jammed in a fold of the bellows - does this need to be leather or can I use the mylar like the treble side.

Of course, if I get this all sorted then I'll have to learn how to play...... that'll be another story.

Thanks for reading

Dee
Logged

melodeon

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1732
Re: New to Melodeons - need repair advice.
« Reply #1 on: June 26, 2009, 05:59:01 PM »

When only one reed sopunds.. the obvious answer is the other matching reed is stuck

gentle prying first  I use bamboo skewers

Rasping... loose reed plate ??
How is the wax.. brittle and crumbling...?

The mylar "vlaves" can be gotten from Hohner USA in the states

Glue the leather ones back on.. straighten them first..recurling  gently prior to fitting
you can use mylar

Metallic rattle is either a reed misaligned or again possibly a loose reed plate and needs rewaxing
Logged

Dee J

  • Member
  • *
  • Offline Offline
  • Posts: 17
Re: New to Melodeons - need repair advice.
« Reply #2 on: June 27, 2009, 09:07:58 AM »

Well not as bad as I thought it would be...... Much cleaning later and it all sounds so much better. Lifted the suspect reedframes (doesn't look like the wax had ever been disturbed before) and removed fluff and dust. Re-fitted and re-set the wax - and it works.  ;D

Now to learn!  :|||:

Dee
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal