Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Mylar or non-leather valves  (Read 4052 times)

0 Members and 1 Guest are viewing this topic.

forrest

  • Other Places::
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1009
  • digits still functioning
Mylar or non-leather valves
« on: June 26, 2009, 05:36:41 PM »

   I own two instruments that came equipped with mylar valves, or 'ventili' as they are sometimes called. One of them is an old black and gold Pokerwork from the 50's, the other is a recently made 4 bass organetto. It is impressive that the valves on the Hohner have stayed perfectly flat all of these years of playing, when compared to leathers.

   I'm sure we are all familiar with the sight of old curled leather valves, looking like droopy banana peels inside an older box. The ability of ventili to retain their position and fulfill their task would suggest that they are of a superior material for the purpose.
    
   I also have a suspicion that they may color the sound of the reeds, or add some resonance during the attack or release of the note or change in air direction. Could this be the reason why these valves do not seem to be universally accepted by current makers/ repairers? .........jwf
« Last Edit: June 26, 2009, 05:43:59 PM by j.w.forrest »
Logged

melodeon

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1732
Re: Mylar or non-leather valves
« Reply #1 on: June 26, 2009, 06:00:36 PM »

Mylar on a 50's Hohner... they would have been fitted at a much later date

I prefer leather.. some prefer mylar
Logged

triskel

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3290
Re: Mylar or non-leather valves
« Reply #2 on: June 26, 2009, 07:17:07 PM »

I prefer leather.. some prefer mylar

Me too, though some people say they can't tell any difference, and I know at least one (very good) tuner who'll swear one is better than the other on one occasion, then say the opposite next time you see him... (Maybe it varies depending on which he's got available?  ???)

HallelujahAl

  • Guest
Re: Mylar or non-leather valves
« Reply #3 on: June 26, 2009, 07:46:13 PM »

Without lowering the tone at all, I don't think it matters whether one prefers leather or a vinyl. I've tried both and can't discern any difference.

Now, back to the topic  ;D

The only reason I use leather on my concertina restorations is that there is a sort of snobbery out there that insists on it. Valves shut the door on the sound - they do not help to make the sound. So any resonant difference is, to this philistine anyway, so miniscule as to be undetectable unless one has the hearing of a bat. So essentially, I prefer whatever's cheapest.
AL
Logged

Andy Simpson

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 938
Re: Mylar or non-leather valves
« Reply #4 on: June 26, 2009, 08:20:37 PM »

There's definitely something to be said for the aesthetic pleasure of a nice natural material but in theory mylar is superior to leather, although who really knows for sure?.

Very often people will hear what they want to hear and I doubt they could tell the difference in a blind test. I remember not too long ago in my teenage electric guitar playing days listening to people claiming they could tell the difference between cables with silver and gold plated jack sockets and even different brands of batteries in effects pedals...  ::)
Logged

forrest

  • Other Places::
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1009
  • digits still functioning
Re: Mylar or non-leather valves
« Reply #5 on: June 26, 2009, 08:44:40 PM »





.............. Valves shut the door on the sound - they do not help to make the sound.
AL

I agree that they do not make the sound, but I think many of us have heard a faulty leather rattling along with the reed. What I am curious about is whether, in the case of the very lightweight and stiff mylar material, the valves tend to resonate briefly before they lie flat. This would give a very subtle 'sizzle' sound, whereas a good soft leather would close with little or no audibility.

Mylar on a 50's Hohner... they would have been fitted at a much later date........


[/quote]

  It has been opined in this forum that Hohner used a non-leather valve material in the '50's. The valves on my Hohner may not be Mylar, but some earlier type of plastic. Perhaps Mr. Triskel can enlighten us on that question........ ::)
« Last Edit: June 26, 2009, 10:46:02 PM by j.w.forrest »
Logged

HallelujahAl

  • Guest
Re: Mylar or non-leather valves
« Reply #6 on: June 26, 2009, 09:27:11 PM »

Quote
What I am curious about is whether, in the case of the very lightweight and stiff mylar material, the valves tend to resonate briefly before they lie flat. This would give a very subtle 'sizzle' sound, whereas a good soft leather would close with little or no audibility.

No sizzle here! But then my playing's not that hot :D
Most of the mylar valves that I've encountered are layered to provide a gentle spring to the valve which would ensure that they slap shut and stay shut under normal circumstances. Leather, imho, is more prone to warping, twisting, buzzing and all sorts of other 'ing' words, than the mylar valves that I've encountered. It's simply a matter of personal choice and taste of course. Most makers tend to use the best materials to hand - Leather was not the material of choice once upon a time. It was the only material that would effectively do the job. I just think that modern synthetic materials are now just as good, will last longer, are less prone to distortion, and are cheaper. Does the job for me anyway.
AL
Logged

triskel

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3290
Re: Mylar or non-leather valves
« Reply #7 on: June 27, 2009, 03:37:07 AM »

Perhaps Mr. Triskel can enlighten us on that question........ ::)

That's a subject I've yet to see any real information about (at the moment) and, of course, the valves are generally what get changed the most often in an accordion.  ::)

However, I did find out a bit about Mylar:

Dupont's polyester research lead to a whole range of trademarked products, one example is Mylar® (1952), an extraordinarily strong polyester (PET) film that grew out of the development of Dacron in the early 1950s.

By the 1960s Mylar® and cellophane generated almost two-thirds of the sales of Dupont's Film Department and practically all of its earnings, whilst during that decade cellophane gave way steadily to Mylar® with its superior strength, heat resistance, and excellent insulating properties. The unique qualities of Mylar® made new consumer markets in magnetic audio and video tape, capacitor dielectrics, packaging and batteries possible. By the 1970s, Mylar® had become DuPont's best-selling film, despite mounting competition.

Today, the versatility of Mylar® continues to be one of its major strengths: perforated Mylar® film is used as food wrap and instrument manufacturers produce high-quality drum and banjo heads from Mylar®. The product’s balance of properties and wide range of capabilities make it ideal in a broad array of applications in the electrical, electronics, magnetic media, imaging and graphics, and packaging markets.

Mylar® is an insulating plastic that can exhibit a variety of properties depending on how its made. It can be very soft or very hard, springy or limp, thin or thick depending on what it is to be used for.


Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal