Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Software to try variations in MMM tuning offsets  (Read 1054 times)

0 Members and 1 Guest are viewing this topic.

Sandy Flett

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 709
    • Accordion and Melodeon Blog
Software to try variations in MMM tuning offsets
« on: August 31, 2016, 12:08:30 PM »

Is there any (free?) software that could be used to provide 3 tones with various tuning offsets so that one could hear the difference to the overall MMM sound of varying combinations of M+ and M- offsets - +23/-21, +20/-20, ...

And would the effect using pure tones be adequately representative of reeds? I tried this many, many years ago with a sampler - I sampled a single reed, then copied it twice, re-tuning one for M+ and the other M-, then played all three together. But it did not sound like accordion musette, just another monster synth sound.

I seem to recall Charlie Watkins offering something like this years ago to help people choose what MMM tunings they would prefer.
Logged
DG Dino Baffetti Carnival II (plus accordions)
Accordion and Melodeon blog

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Software to try variations in MMM tuning offsets
« Reply #1 on: August 31, 2016, 01:44:44 PM »

I do t know any electro is for doing this.  When I have a customer who is unsure of the tremolo specifications I usually tune a couple of midrange notes for them to listen to, then make adjustments till it's what they want.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

howard mitchell

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 456
    • Howard Mitchell
Re: Software to try variations in MMM tuning offsets
« Reply #2 on: August 31, 2016, 04:25:07 PM »

Sandy,

I just tried using Audacity and its "Change Pitch" effect.
I loaded track 1 with a previously sampled melodeon note, copied it to two new tracks and then applied the Change Pitch effect to each of these new tracks using the frequency change rather than note name change.

Give it a try.

Mitch

Logged
Saltarelle D/G, Hohner D/G, Hohner C/F, Dallape C/F, Hohner A/D, Gaillard G/C, Sagne D, Roland FR18D, Hohner Bb/Eb.

Sandy Flett

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 709
    • Accordion and Melodeon Blog
Re: Software to try variations in MMM tuning offsets
« Reply #3 on: August 31, 2016, 11:21:18 PM »

Thanks Mitch. I use Audacity so will give it a go. How well did it work for what you were trying to achieve?
Logged
DG Dino Baffetti Carnival II (plus accordions)
Accordion and Melodeon blog

Mike Hirst

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1433
  • Black Dot B/C, Bastardo C#/D, Corona II GCF
Re: Software to try variations in MMM tuning offsets
« Reply #4 on: September 01, 2016, 08:05:49 AM »

If you're OK with using command line tools sox is good for this - http://sox.sourceforge.net/.
Logged
Semper idem, sed non eodem modo
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal