Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Fingerboard Oops! Please help  (Read 1519 times)

0 Members and 1 Guest are viewing this topic.

Grape Ape

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1209
Fingerboard Oops! Please help
« on: September 04, 2016, 12:38:21 PM »

So I decided to lower the action on my pokerwork which went without a hitch until I went to reattach the fingerboard and not realizing the screw had rethreaded gave the screw a final twist when it decided to break off (cheap hardware).  Now I have a fingerboard with half a screw stuck in it.  The screw is small and the fingerboard is plastic.  Looking for advice on how to get the screw out- carefully- and then on what to do in order to successfully reattach the fingerboard after the screw is out knowing that the hole is now misthreaded.  Any advice appreciated.
Logged

John MacKenzie (Cugiok)

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2360
  • Fettling... Learning to reed and right.
Re: Fingerboard Oops! Please help
« Reply #1 on: September 04, 2016, 02:38:00 PM »

I'd opt for a replacement fingerboard. Fresh start. and less hassle. Getting that broken screw out is going to be problem. as drilling it out will generate heat, and it's a plastic fingerboard, so likely to make the problem worse.


Sir John
Logged
There is no beginning to my talent :)



: Hohner Club Modell 1. Bb/Eb, de-clubbed : Early Hohner Pressed Wood A/D : 1930's Varnished wood G/C:  Hohner Erika C/F: Bandoneon tuned D/G Pressed wood: Koch F/Bb; G/C Pre Corso

Lars

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 797
Re: Fingerboard Oops! Please help
« Reply #2 on: September 04, 2016, 03:40:42 PM »

I've got a handful of spare plastic keyboards if you need one. Yours for the price of shipping.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Fingerboard Oops! Please help
« Reply #3 on: September 04, 2016, 04:09:15 PM »

Hohner plastic keyboards usually have a metal insert that the screw threads into, so it worth a try to get the broken piece out. Is there anything projecting that you can get hold of? End cutters can be quite good for gripping the broken stump, just don't grip to hard or you will cut it off! Then you can clean up the thread with a screw with a slot filed across the threads, like a crude sort of tap.  The screws are standard M3 so easy to find something to do the thread cleaning with, though not so easy to find an M3 that is long enough to replace the original.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Henry Piper

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 368
Re: Fingerboard Oops! Please help
« Reply #4 on: September 04, 2016, 04:12:40 PM »

.............Or opt for one of Acorn instruments Excellent replacement Wooden fingerboards.!!
( No connection !!.... just a satisfied customer)

Logged
From Ottery St Mary Devon. Currently Playing Dino Baffetti BP2 in D/G, Hohner Student 1 P.A conversion  in D/G,  Hohner 3515 Pre-Pokerwork in A/D,   2 row "Beaver Brand" in Bb/Eb, Hohner Pre- Erica in G/C .  Single row permanent 4 voice, 4 bass in C from old Hohner single row and bits of a cheap Cajun box !!,

Grape Ape

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1209
Re: Fingerboard Oops! Please help
« Reply #5 on: September 04, 2016, 08:44:34 PM »

Hoping to fix the one I have, otherwise I may take up Lars on his very nice offer.  Unfortuneately no part is sticking out, it just seems such a waste not to try and drill it out or something as the fingerboard is otherwise perfect without so much as a scratch.  Theo, I am not sure I understand your suggestion of how to rethread the hole should I actually succeed at removing the darn thing.
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal