Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2] 3 4 5   Go Down

Author Topic: The all-important interface between box and PA system  (Read 19175 times)

0 Members and 1 Guest are viewing this topic.

Chris Brimley

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2038
Re: The all-important interface between box and PA system
« Reply #20 on: September 20, 2016, 03:25:51 PM »

Quote
Your comment about proximity effect being the problem with close micing isn't normally true, this depends on the size of the mic capsule but usually only gets significant if you get within a few inches

Which I think many such systems are, because they are trying to cut down feedback problems?

Regarding proximity effect, I don't think I was saying it's the problem per se, I was saying that compensating for it simply by eq'ing won't resolve the whole issue - are we in agreement on that point, Ian? 

I've always thought of 'proximity' effect purely as a sound phenomenon caused by the greater ability of low frequency sound waves to bend round corners and thus cancel each other out, rather than some problem with the microphone.  For example, put your ear near a cymbal!

I'm interested in your 'upwards and outwards' comment - can you explain what the 'upwards' alignment is about?  Is it something to do with keeping the sound sources well-aligned in relation to the mic axis?

Anahata, thanks for your 120 deg comment - how does this translate to a good mic'ing system, in practice?





 
Logged

penn

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 574
Re: The all-important interface between box and PA system
« Reply #21 on: September 20, 2016, 04:01:11 PM »

Quote
..........
I've always thought of 'proximity' effect purely as a sound phenomenon caused by the greater ability of low frequency sound waves to bend round corners and thus cancel each other out, rather than some problem with the microphone.  ........
 
not all microphones exhibit proximity effect - omnis don't
Steve
Logged
Hohners, Dino Baffetti, Lilly, Benny + a lot of junk.

dave t

  • Good talker
  • **
  • Offline Offline
  • Posts: 92
  • DB Oakwood Super III/Pastourelle II
Re: The all-important interface between box and PA system
« Reply #22 on: September 20, 2016, 04:33:00 PM »

Quote
..........
I've always thought of 'proximity' effect purely as a sound phenomenon caused by the greater ability of low frequency sound waves to bend round corners and thus cancel each other out, rather than some problem with the microphone.  ........
 
not all microphones exhibit proximity effect - omnis don't
Steve

Right. The proximity effect is a function of mic design and is inherent to some degree to all directional mics and mics with switchable polar patterns. Not that you'd really want to use an omni in live sound as it's far more likely to give you problems with feedback.
Logged

Chris Brimley

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2038
Re: The all-important interface between box and PA system
« Reply #23 on: September 20, 2016, 04:42:48 PM »

But if the ear exhibits proximity effect, it's difficult to say that one or other mic is being 'unrealistic' - it's just that you need to use different ones for different applications.  I suspect (but haven't tried it) that if I put an omni-directional mic near a cymbal, it would sound much the same as it would to an ear?
Logged

dave t

  • Good talker
  • **
  • Offline Offline
  • Posts: 92
  • DB Oakwood Super III/Pastourelle II
Re: The all-important interface between box and PA system
« Reply #24 on: September 20, 2016, 05:24:01 PM »

But if the ear exhibits proximity effect

What makes you say that the ear exhibits proximity effect?
Logged

Chris Brimley

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2038
Re: The all-important interface between box and PA system
« Reply #25 on: September 20, 2016, 06:13:34 PM »

Well I don't know, but from the definition of proximity effect, the surprising huge bass effect you get from putting your ear close to a cymbal would seem to qualify.
Logged

dave t

  • Good talker
  • **
  • Offline Offline
  • Posts: 92
  • DB Oakwood Super III/Pastourelle II
Re: The all-important interface between box and PA system
« Reply #26 on: September 20, 2016, 07:54:21 PM »

Well I don't know, but from the definition of proximity effect, the surprising huge bass effect you get from putting your ear close to a cymbal would seem to qualify.

No, that's not the same thing at all. The proximity effect that has been talked about in this thread is specific to the way that mikes are designed and is not comparable to the way that our ears work.
Logged

Chris Brimley

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2038
Re: The all-important interface between box and PA system
« Reply #27 on: September 20, 2016, 09:24:54 PM »

Well, if so, are you also saying that the cymbal effect doesn't exist, or that baffles have no effect?
Logged

dave t

  • Good talker
  • **
  • Offline Offline
  • Posts: 92
  • DB Oakwood Super III/Pastourelle II
Re: The all-important interface between box and PA system
« Reply #28 on: September 20, 2016, 10:29:31 PM »

No. I'm just saying that you are equating two things that are completely different.
Logged

Chris Brimley

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2038
Re: The all-important interface between box and PA system
« Reply #29 on: September 21, 2016, 08:36:27 AM »

Well, it may well be a nomenclature matter, but that does not mean that the source effect I thought I was referring to doesn't exist.  Put an ear next to a cymbal, and the dominant frequencies you hear are considerably different, and surely have a straightforward physical explanation to do with the baffle effect (or lack of it), nothing to do with a microphone.  Melodeons have imperfect baffles too, and are therefore bound to exhibit this effect.

Something has always troubled me about the usual explanation of the overall effect as being caused by microphone design:

Take a single low frequency sound wave, in air at atmospheric pressure.  At any one point, it can have only two features in that sound wave which a microphone (any microphone) can sense - direction of travel, and amplitude.  The microphone is not intelligent, and has no other senses.  There is therefore absolutely no way that it can tell how far away the sound source is.  It cannot possibly distinguish between two sounds with the same frequency, same direction of travel, same amplitude, at its point of location, and will therefore produce the same electrical signal for each.  One source could be a loudspeaker 2m. away, the other could be a small source 2cm away.  How can the microphone (indeed any microphone) possibly boost the latter signal, but not the former, if it can't tell which is which?  Yet that is what the theory would require.
Logged

dave t

  • Good talker
  • **
  • Offline Offline
  • Posts: 92
  • DB Oakwood Super III/Pastourelle II
Re: The all-important interface between box and PA system
« Reply #30 on: September 21, 2016, 09:31:27 AM »

Chris, you're making lots of incorrect assumptions. There are plenty of resources out there that clearly explain what causes the proximity effect when it comes to microphones (IanD has already posted a link to Wikipedia). If you take a look at these then it should be clear that on a directional mic the proximity of a sound source to the transducer has a direct effect on the frequency response of the output of the mic. I don't think that it's productive to keep going over this ground as it's already been well covered by previous posters on the thread.

Thanks, Dave
Logged

Anahata

  • This mind intentionally left blank
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6767
  • Oakwood D/G, C/F Club, 1-rows in C,D,G
    • Treewind Music
Re: The all-important interface between box and PA system
« Reply #31 on: September 21, 2016, 10:03:00 AM »

Take a single low frequency sound wave, in air at atmospheric pressure.  At any one point, it can have only two features in that sound wave which a microphone (any microphone) can sense - direction of travel, and amplitude.

A better way to characterise this would be pressure and velocity, and then it starts making more sense.
Microphones do respond differently to these depending on pattern.
An omnidirectional mic responds purely to pressure.
A figure-of-eight mic responds purely to velocity (note important difference: waveform is precisely inverted when you turn the mic round so you are playing into the "back" of it)
Cardioid mics respond to both and are designed so that from behind the mic, the pressure and velocity components are equal and opposite, so they cancel.
Hypercardioid are like cardioid with the velocity component having slightly more influence.

Now, the balance between pressure and velocity components starts changing with frequency when you get close to a sound source, in such a way that a pressure-responding mic (omni) retains a reasonably flat response, while a velocity mic (fig-8 or cardiod) gets that bass boost we call proximity effect.

IanD hinted at the physics behind this when he mentioned that the sound waves close to a point source are spherical, while further away they become more planar. I'd struggle to remember the exact maths now, it's over 40 years since I last wrote formulas with div, grad and curl in them...
Logged
Слава Україні !
Music recording and web hosting: www.treewind.co.uk
Mary Humphreys and Anahata: www.maryanahata.co.uk
Ceilidh band: www.barleycoteband.co.uk

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: The all-important interface between box and PA system
« Reply #32 on: September 21, 2016, 11:20:19 AM »

Well, it may well be a nomenclature matter, but that does not mean that the source effect I thought I was referring to doesn't exist.  Put an ear next to a cymbal, and the dominant frequencies you hear are considerably different, and surely have a straightforward physical explanation to do with the baffle effect (or lack of it), nothing to do with a microphone.  Melodeons have imperfect baffles too, and are therefore bound to exhibit this effect.

Something has always troubled me about the usual explanation of the overall effect as being caused by microphone design:

Take a single low frequency sound wave, in air at atmospheric pressure.  At any one point, it can have only two features in that sound wave which a microphone (any microphone) can sense - direction of travel, and amplitude.  The microphone is not intelligent, and has no other senses.  There is therefore absolutely no way that it can tell how far away the sound source is.  It cannot possibly distinguish between two sounds with the same frequency, same direction of travel, same amplitude, at its point of location, and will therefore produce the same electrical signal for each.  One source could be a loudspeaker 2m. away, the other could be a small source 2cm away.  How can the microphone (indeed any microphone) possibly boost the latter signal, but not the former, if it can't tell which is which?  Yet that is what the theory would require.

Chris, the effect you're talking about here is the "close-mic" one I referred to earlier where the sound close to some instruments (where different parts radiate different sounds) is not the same as the sound far away -- when you hit a cymbal it has a low-frequency "wobble" that you can see, which means different parts of the cymbal (across each surface, and top and bottom) generate low-frequency sounds in and out of phase with each other, but across the cymbal as a whole they all cancel out if you're a significant distance away because there's nothing to stop air moving from one side of the cymbal to the other. If you put a mic (any pattern including omni) or your ear very close to the cymbal you hear the sound radiated by one local part of it which can have bass content, as you move further away cancellation from the other parts comes in and the bass disappears.

But this is not proximity effect which has a specific and different meaning and relates to microphones. As Anahata says, the microphone *can* tell how far away the sound is by the curvature of the sound wave (pressure gradient) which is what causes proximity effect. Suggest you read up on this if you're interested, because a lot of the assertions you keep stating are wrong ;-)
« Last Edit: September 21, 2016, 12:55:23 PM by IanD »
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: The all-important interface between box and PA system
« Reply #33 on: September 21, 2016, 11:50:54 AM »

Quote
Your comment about proximity effect being the problem with close micing isn't normally true, this depends on the size of the mic capsule but usually only gets significant if you get within a few inches

Which I think many such systems are, because they are trying to cut down feedback problems?

Regarding proximity effect, I don't think I was saying it's the problem per se, I was saying that compensating for it simply by eq'ing won't resolve the whole issue - are we in agreement on that point, Ian? 

I've always thought of 'proximity' effect purely as a sound phenomenon caused by the greater ability of low frequency sound waves to bend round corners and thus cancel each other out, rather than some problem with the microphone.  For example, put your ear near a cymbal!

I'm interested in your 'upwards and outwards' comment - can you explain what the 'upwards' alignment is about?  Is it something to do with keeping the sound sources well-aligned in relation to the mic axis?

Anahata, thanks for your 120 deg comment - how does this translate to a good mic'ing system, in practice?

http://www.harmonycentral.com/articles/what-you-need-to-know-about-microphone-polar-patterns

If the monitor is on the floor a few feet in front of you and you want it to be in the pattern null of a cardioid mic, you need to point the rear of the mic (the connector) at the monitor, which means the mic has to be tilted down at the connector and up at the capsule. For example, a melodeon played standing up is about 4 feet off the ground, if the the monitor is 3 feet behind the microphone, a cardioid mic a foot from the box would need to be on a low stand (about 3 foot) and tilted (about 45 degrees) to put the monitor in the pattern null and be pointing at the box. If you have a mic for each end spaced a couple of feet apart then these ideally need splaying outwards to reject the monitor, which is exactly what you don't want to pick up the instrument sound.

http://www.harmonycentral.com/articles/what-you-need-to-know-about-microphone-polar-patterns

In the same case, a supercardioid/hypercardioid (rear off-axis nulls are in different places) can be placed level on a 4 foot high stand, so the monitor is further from the mic and in the pattern null, both of which make feedback much less likely. If you have two (one for each end) maybe 3 feet apart they can still be roughly parallel to each other and keep the monitor near the null for both of them.

The same applied with a side fill (monitor on stand at ear level) -- with a super/hypercardioid it's easy to get the mic pointing at the box with the monitor around 60 degrees off-axis at the rear, it's much harder with a cardioid -- basically, the mic needs to be in a straight line between monitor and box.

Even if you're not too fussy about exact positioning, the super/hypercardioid has a much bigger rear zone with good noise rejection than the cardioid and the tighter pattern reduces wash from other instruments on the stage. The disadvantage (apart from being less common) is that proximity effect is bigger than a cardioid, so the variation in bass tip-up with distance is bigger -- this means it's more important (especially for a singer) to keep a consistent distance from the mic, either right on the windshield or a constant distance from it, and also to keep reasonably on-axis.

All this is why cardioids are usually used for vocals, and super/hypercardioids are often preferred for instruments -- though many sound guys just use the same mics for everything because it's easier...
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

Chris Brimley

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2038
Re: The all-important interface between box and PA system
« Reply #34 on: September 22, 2016, 12:47:43 PM »

I’m grateful to everyone for the advice I’ve received about microphone proximity effects.  As a result I now believe the (brief) answer to my paradox is this:  Directional microphones can indeed distinguish between a far and a very near source.  This is because they should not be considered as being located at a single point as I suggested earlier, they involve comparing the sound pressures at two points along the path of the sound wave.  As Ian (and Anahata) observe, the path of that wave between these points is not planar at close distances to the source, and this difference affects low frequencies particularly.  There isn’t just a phase change in the wave as it travels between the two points, there’s an amplitude change as well, if it’s close to the source.  This affects the microphone’s response by ‘tipping up’ the bass.

There still seems to me to be a different issue regarding the 'cymbal' effect, but the point of this technical discussion for the purposes of this thread was originally that there are potential issues to do with siting microphones close to sources, and I think everyone agrees on that, so hopefully that's the main point?

I thought it might be helpful to move on, and to try to get to the stage of us agreeing a sort of guide of useful things to consider?  I don’t expect this to be easy, but can I throw this out for comments, with some trepidation?:

1.   When considering how to mic up a box to play live, a player or sound engineer is faced with various difficulties.  These difficulties result from the multiple sources of the sound, and from the fact that the sources on the LH side are constantly moving from side to side.

2.   It is well worth while as a player experimenting with your equipment, and discussing the issues with your sound engineer if you have a regular arrangement with one.

3.   The aim of the experiments should be to achieve a compromise that suits you as a player, and achieves a strong enough and realistic signal through the system covering the whole box evenly, without being prone to feedback problems.

4.   The first thing to decide is whether you as a player want to move around onstage while playing, as free-standing mics will not be an option if so.

5.   Different types of microphones exhibit very different characteristics.  Although microphones need to be of sufficient intrinsic quality to deliver a realistic and even full-range sound, that is by no means the end of the story.  Buying an expensive microphone but not using it appropriately will not work.

6.   The options available for you to try are:

a.   Mic up the RHS only.  This cuts down the spread of sound sources used, which reduces the mic’ing problems.  Some players (for example some semitone box players) do not use the LHS, or feel that in a band where other members  are providing the accompaniment, ‘RH only’ gives the best sound overall.  For players of smaller accordions, it can also avoid the clash of accompaniments which are an inevitable result of playing an intrinsically limited instrument.

b.   Try a full close-mic’ing system with two or more mics.  The main issues to experiment with here are:

i.   Microphone positioning, to achieve reasonably even coverage of the sound sources, but without unacceptable loss of signal.
ii.   The evenness in response of small mics.
iii.   Assessment of the effect of sources at different distances, off-axis to different extents.
iv.   Orientation of the close mics so that a ‘null’ region (for all frequencies) is presented to the monitor by all mics (where using floor monitors).
v.   Appropriate eq’ing if ‘proximity’ effects occur.
vi.   Balance between the LH and RH sides.
vii.   Stability, weight and fixing of the mics.
viii.   Easy and quiet changeover between boxes if necessary.
ix.   Consideration of what happens to mic positions and orientation when you put the box down.

c.   Try a two-mic free-standing system.  This can offer cost savings over specialist close-mic’ing systems, and you can use larger high quality mics with more specific ‘null’ areas.  Because they are static, the null area does not need to be as wide, provided the mics are appropriately positioned in relation to the floor monitor.   Changing instruments is not a problem.  Experiment with the following:

i.   Microphone positioning, to achieve reasonably even coverage of the sound sources over the normal bellows extensions you use, but without unacceptable loss of signal.
ii.   Assessment of the effect of sources at different distances, off-axis to different extents.  It should be possible to site the mics further away than with the close mic system without feedback problems arising, so these effects may be less.
iii.   Appropriate eq’ing if ‘proximity’ effects occur (less likely than with close-mic’ing).
iv.   Balance between the LH and RH sides.
v.   For free-standing cardioid mics, first try aligning them both pointing diametrically away from the monitor, pointing to the mid-point of the RH side, and the mid-point of normal bellows travel on the LHS, with both mics around 20cm away.  Check that the LH movement is such that the sound is even for your playing style (This is a potential benefit of this system, since the bellows movement is likely to be across the front of the microphone.)
vi.   For free-standing supercardioid or hypercardioid mikes, try aligning them level on a stand at 1.2m height, so the monitor is further from the mic and in the pattern null, both of which make feedback much less likely. Try them maybe 0.9m feet apart they can still be roughly parallel to each other and keep the monitor near the null for both of them (120 degrees off axis).  (Suggested displacement from box, anyone? And is it a good idea to sit a bit sideways?)

d.   Try a combination of b) and c), using the close mic on the LHS.  This will have a combination of the same considerations as above.  This has the potential benefit of the LH microphone’s distance from the source being constant, though that may not be a completely natural sound.

Logged

Andrew Wigglesworth

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1101
  • 07
    • My website
Re: The all-important interface between box and PA system
« Reply #35 on: September 22, 2016, 03:31:44 PM »

OK, interesting discussion here. You were never alone, I have been following it :-)

You can experiment and play around with PA equipment in your front room/basement/garage/co-op hall or whatever but in the end it is practical application that wins. You will familiarise yourself with the equipment and maybe learn some stupid things not to do, which are both very good, but you will absolutely not come up with a solution that fits all (or even most) situations.

This summer we played at the "Other Place" theatre in Stratford-upon-Avon. We had a really weird feedback, it wasn't making any sense. The Theatre is one of those that they call a "black box" space, and with the seats packed away it was resonating like anything. Then, I realised that the floor was wooden and it was the bass bins sending vibrations through the floor and up the microphone stands. Turned the bass bins right down, and hey presto, no bass bins to speak of but also no feedback. We then removed the crossover and ran on the top speakers.

If you are playing out in a marquee in the middle of a field, the PA setup is different again. EQing is different, the bass requirements are different, foldback sounds quite different to being in a room. Playing with a proscenium arch in a "proper theatre" is a very different experience to a noisy club, large pub room or hotel function room.

Familiarity with your PA equipment will give you a good chance to deal with these different situations, but in the end, it's also why we employ a sound engineer for many gigs where we use our own PA.

I've experimented with my own stage setup over the years. With the wise words of people like Ian Dedic, I've tried over several periods to use clipons on the left hand end. However, I've always come back to a two stand microphone setup for mainly practical reasons.

I use at least two, lately three, melodeons on stage, and also a whistle microphone. My main problems with clipons have been - keeping them on the instrument, mechanical and movement noise, transferring them between instruments.

Keeping them on the instrument. The only practical place has been to clip them onto the left hand strap. However, none of the clips that I have used have been particularly good at this. The solution is a bit of gaffer tape, but this in also increases the problem of transferring the microphone to another instrument.

Mechanical and movement noise. Whatever I've done, I've not solved mechanical noise. I've found that some microphones are better than others, but they all exhibit this issue. Movement noise happens with them waving around and, even with gaffer tape, not being all that well seated. Other movement noise include putting down the instrument, picking up the instrument and when sliping your hand into the left hand strap.

Transferring them between instruments. Getting more clipons would seem to be a solution here. However, it brings its own problems. Who is responsible for turning microphones off and on? I'm likely to have two instruments at my feet, both with live microphones. I could try with silent switches, but, quite honestly, three boxes, three clipon microphones and their wires (and melodeon treble mic and a whistle mic), then three silent switches ... good grief. I've enough to think about with the tunes, which box to play etc without being constantly distracted by thinking about and dealing with microphones and their switches.

OK, so have only one clipon and a silent switch. Well, I'm still faffing around changing over the microphone at least six times in a 40 minute set. Sorry, but that's just not a thing to endure, for me, the other musicians or the audience.

So, what do I use and what impact does it have on the sound? Recently I've been using two Shure Beta 57A microphones on short stands. These are super-cardioid, so they have very good side rejection of noise. Oh, and I always sit down.

The right-hand mic points straight at the centre of the grill (ie. across stage), about 6 to 8 inches away.

The left-hand mic I place slightly lower, about 30 degrees from straight (see above), pointing slightly upwards a bit forward of the other mic. It sits about 6 to 8 inches away (to the left) from my usual starting point with the bellows. Theoretically I could hit the left-hand mic with my bass end, but never have.

This is a nice simple arrangement, fewer things to go wrong, and no constant fiddling and resetting.

Do I get enough bass? The answer is definitely yes.

The only "control" I take over sound engineers is that I bring my own stands and microphones. This prevents me having strange drums mics waved at me (will this be alright?), tall wobbly vocal stands used, bass drum mic and stand pulled out and proffered to me or the variety of other strange things purporting to be microphones. On two occasions has this been any sort of issue (both at the same venue), where they preferred to use their own rather expensive condenser microphones. These were eminently suitable, so I was very happy to use them.

With sound engineers who have less experience of melodeons, the issue has often been getting them to turn the bass end down.

One interesting experience this summer was playing at the Beautiful Days Festival, where they gave me my own personal monitor wedge, with my own mix (oh, the luxury). It was just in front of me to the left and angled towards me. This put my left-hand mic right in the firing line (2 or three feet away), but angled with monitor to its side and slightly behind. It also meant my right-hand mic wasn't exactly facing away from the monitor, though not pointing anything like straight at it.

None of this was an issue. I could hear myself clearly and got a great mix, no feedback, and plenty of bass. This was a highly experienced sound crew (lead by a woman; I only mention this because it is so unusual and there should be more) who work with the Levellers. They were confident and knew what they were doing, we had a good long setup time in the morning (another luxury in itself), and we trusted them to get it right. The sound crew make more than technical differences to how a performance goes.

Micing in studios is a very different proposition. I'd never take stage microphones to a studio, it would be pointless. My experience has been a couple of nice  condenser mics placed further away than you'd use on a stage. Say, 2 or three feet away at each end, pointing in at about a 45 or so degree angle from a foot or so above the instrument. I wouldn't ever expect to see a crossed pair in a studio for a multi-track recording.

Chris Brimley

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2038
Re: The all-important interface between box and PA system
« Reply #36 on: September 22, 2016, 04:25:32 PM »

Andrew, what an excellent and frank contribution! - I'm indebted to you.

The Shure 57A supercardioid mic polar diagrams seem to indicate that the 120 deg off-axis alignment would be best for your requirements, and it sounds like you've reached much the same conclusion?  I hoped that people would add their experiences to the idea of a guidance document - are there words you would like to add to it, or amend?  It sounds like you've had particular experience of the practical issues of close mic'ing solutions, and could usefully add some guidance on supercardioid double free-standers.

I related particularly to your discussion about 'faffing around', because I've found just the same issues.  It's so important to have a system that doesn't make demands on your time onstage, because there's so little of it available.  On that point, I've recently taken to bringing along an adjustable office chair to gigs.  The reasons are three-fold: It's adjustable to exactly the right height to play comfortably, I can lean back between playing and relax my back muscles, and when I want to change boxes or whatever, I simply slide back on the rubber castors, which avoids mechanical noises.  (Sorry, I digress!)
« Last Edit: September 22, 2016, 04:32:08 PM by Chris Brimley »
Logged

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: The all-important interface between box and PA system
« Reply #37 on: September 23, 2016, 04:43:40 PM »

There's a lot of excellent advice in all the last few posts :-)

The choice between stand mics and clip-ons is a personal one, both can work well when used properly under the right circumstances. Personally I haven't had any problems swapping bass-end clip-ons between boxes, but then I don't need to do it very often -- and also I move the bellows around a lot when playing and like a fair bit of bass end in the monitors, so for me it's a better solution than a stand mic. Chris prefers a stand mic because he swaps a lot more often, has had problems keeping a clip-on attached, and (maybe...) doesn't move so much as I do or want as much bass end in the monitors -- again, it's horses for courses. When mixing I've had more feedback and varying volume problems (not always!) with bass end stand mics, which is why I prefer a clip-on.

Andrew's studio experience agrees with mine, except the bass end mic was placed below the level of the box and the treble one above it because that's the way the box points when I play it (with one strap, standing up -- Chris, do you play sitting down?) -- again, different positions may suit other people, that's the job of the sound engineer to decide.

Andrew, I'd say that if you're using a stand mic 6-8 inches is a bit close for a normal-sized melodeon, especially with a supercardioid mic with a tighter pattern, because this puts the top and bottom notes well off-axis and also further from the microphone -- you might not notice so much when playing, but when mixing and listening to FOH this makes for quite a big volume difference across the keyboard. I normally put the mic 10-12 inches away -- you might think this doesn't make much difference but it does, and I've never had feedback problems doing this since a melodeon is a pretty loud instrument. Or mine is, anyway...
« Last Edit: September 23, 2016, 04:46:56 PM by IanD »
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

Chris Brimley

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2038
Re: The all-important interface between box and PA system
« Reply #38 on: September 24, 2016, 09:37:16 AM »

Ian, you're right about my playing style, I always sit down (though I once experimented with standing with my right leg on a stack of cases), and I think that I probably don't expand the bellows so much as most people I've seen.  This is not because I play more quietly, it's because the playing style I've developed with my big boxes uses reversals of RH notes and LH chords extensively, not only for variety in dynamic effect, but to cut down on bellows extensions deliberately.  There's various benefits from this, I find: a) this microphone location issue; b) having a smaller volume of air to compress and expand requires less pronounced changes in direction to generate the necessary pressure to drive the reeds, so it tends to give more attack when playing;  c) it's easier on the arms.  An example of this for me is the Atholl Highlanders tune in A (on a DGAcc box) - I used to find that almost unplayable until I learned to re-finger my playing to use the push LH bass A chord to bring those bellows back in.

I found when I did my sub-mixer experiment that the LH mic positioning issue was probably the most instructive part of it.  I was listening closely to the effect of normal bellows extension on LH sound level, and was relieved to note that with my system it really didn't vary noticeably over my normal range of bellows extensions. (And there's a little trick - when you do need to open them a lot, you can afford to lean over to the right a bit without losing RH mic signal much.)  I agree that a useful starting point for such an experiment with my type of mics would be to have the LH mic (possibly RH too) in the range 20-30cm away. Would anyone like to suggest a good figure for other types of mic? 

Something else I've learned is to make sure to resist the temptation to approach the microphone to 'compensate' when the audience noise gets loud - that just makes it worse for everyone!
Logged

Hasse

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 323
Re: The all-important interface between box and PA system
« Reply #39 on: September 25, 2016, 08:00:23 PM »

Really interesting thread! Thanks!! (:)

I quite agree that musicians should have at least some understanding of mic placements for their instruments.  However in my experience the good sound engineers already know more about this than I do, while the bad ones think they do and won't be told.
True! Though too often I end up using the sound techs knowledge as an "excuse" when I have not prepare myself enough before an amplified gig. :-[ I know with one sound-tech that after  initial short sound check everything seemed perfect, but after two tunes in the program I go 2-voice, and you should see his surprised face...

I also remember the sound tech at work once mentioned to me, (when I inquired about strap-on swan neck microphones), that he didn't always find them appropriate on certain instruments, especially if the musician couldn't set them up properly because the mechanic noise from the instrument came through to powerful and was hard to eliminate. Though I think he probably was adressing one of my older tubas with Hohner like sound coming from the valves... this made me thinking about certain melodeons. Maybe Chris’ idea in the beginning of this thread could help the sound tech and musician eliminate that aspect better? Or am I misunderstanding somethings?
« Last Edit: September 25, 2016, 08:58:22 PM by Hasse »
Logged
Sweden, Skåne
Pages: 1 [2] 3 4 5   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal