Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 2 3 [4] 5   Go Down

Author Topic: The all-important interface between box and PA system  (Read 19143 times)

0 Members and 1 Guest are viewing this topic.

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: The all-important interface between box and PA system
« Reply #60 on: October 23, 2016, 01:16:44 PM »

ADVICE REQUESTED on miking up....... for total novice.

I'd be grateful for advice on basics. Supposing I use  one or two AKG C156  gooseneck mikes,  what else would I need, if anything,  in order to plug in successfully to typical mixing desks? ( I've heard about  "Phantom" but no idea what this means).  On my microvox bass mike there is a battery box clipped to my belt. Anything like that needed?   Thanks in advance.

If using the AKG 516 mics you will also need a B23L battery box. The mics have mini-XLR cables and plugs which plug into the mini input sockets on the battery box which also has a belt clip. The box also has separate gain controls for each input channel. The battery box has a full size XLR output socket for a cable to a mixing desk/amp.

The box contains a 9v battery to power the mics or it can be switched to phantom power mode to take power from the mixing desk/amp. Phantom power is an alternative to battery power and is supplied via the XLR cable from the mixing desk.

http://www.akg.com/pro/p/c516ml
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Jack Humphreys

  • Hero Member
  • *****
  • Online Online
  • Posts: 709
    • tunesbyjackhumphreys
Re: The all-important interface between box and PA system
« Reply #61 on: October 23, 2016, 04:06:37 PM »

Many thanks Steve. I've put the orders in!

JohnAndy

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 244
  • John Barber
Re: The all-important interface between box and PA system
« Reply #62 on: October 23, 2016, 05:23:05 PM »

The AKG website says that the output from the B23L box is a 3.5mm stereo jack socket rather than an XLR output: http://www.akg.com/pro/p/b23l

As far as I understand it (which isn't very far!), a jack cable is a less desirable way of connecting to the PA than an XLR cable because the jack cable is more liable to suffer from interference.

Steve - is this correct, and if so, do you think it's a significant drawback?

Logged

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: The all-important interface between box and PA system
« Reply #63 on: October 23, 2016, 05:58:32 PM »

The AKG website says that the output from the B23L box is a 3.5mm stereo jack socket rather than an XLR output: http://www.akg.com/pro/p/b23l

As far as I understand it (which isn't very far!), a jack cable is a less desirable way of connecting to the PA than an XLR cable because the jack cable is more liable to suffer from interference.

Steve - is this correct, and if so, do you think it's a significant drawback?

Hmm... I see they must have changed the spec from the battery box I use. Not only does it now have a 3.5 mm jack output, it is now powered by 2 x AA batteries, instead of the previous 9v battery.

I will bow to others' expertise regarding the desirability or not of the jack cable vs the XLR cable, but all I can say is that I've used both on different setups and never had any problems with the jack cable. I can't imagine a prestigious manufacturer like AKG selling a duff product.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Andrew Wigglesworth

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1101
  • 07
    • My website
Re: The all-important interface between box and PA system
« Reply #64 on: October 23, 2016, 06:59:56 PM »

According to its user manual

http://cloud.akg.com/8259/c516_manual.pdf

the C516 uses a B23L pack or a MPA V L phantom power adapter for plugging straight into a standard XLR microphone cable coming from a desk with phantom power.

http://www.akg.com/pro/p/mpavl2

To be honest, I wouldn't find the battery pack with its stereo jack connector very appealing for stage work.

Bill Young

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1151
  • Paolo Soprani BCC#
Re: The all-important interface between box and PA system
« Reply #65 on: October 23, 2016, 09:47:53 PM »

It is the AKG B29L battery pack which has the XLR outputs and 9v battery. It seems to have been discontinued and replaced by B23L.
Logged

sticky fingers

  • Tech Guru
  • Regular debater
  • ***
  • Offline Offline
  • Posts: 119
Re: The all-important interface between box and PA system
« Reply #66 on: October 23, 2016, 10:44:06 PM »

S-it, I think I have done 4 gigs since I started to read this thread!, keep going boys, I've not lost the will to live just yet!, still waiting for the words," Trans directional diffusion!"," sub harmonic coherence!"," Anechoic resonance!" and," fractured time alignment", I thought it was hard enough to play the box!, SF.

Chris Brimley

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2038
Re: The all-important interface between box and PA system
« Reply #67 on: October 23, 2016, 11:54:24 PM »

I played at a recent gig and took Ian's advice by increasing the mic distance from around 20 cm to 23 cm or so, both ends.  Yes, it works - after compensating by slightly adjusting the volume level, I found it was indeed noticeable that the box sound was more even, and more in keeping with the other instruments, particularly the violin.  As I run our sound desk onstage, and am very used to the balance of instruments in the mix, I am well-placed to appreciate the effect of these changes.  I can only say that I am very grateful to you, Ian, for your work on this.

For those using close mic'ing systems who are querying power supply issues, don't most mixers these days allow phantom power anyway?  The unit shown doesn't seem to allow eq'ing of each channel, just relative balancing.  I notice that the DC voltage is 9 volts, which may perhaps suit these particular mics - the usual level from a desk is around 48 volts, isn't it?  Looking at the description, I noticed this:  'an ideal way to mic up an accordion'.  It seems to me that that is quite an optimistic claim!
Logged

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: The all-important interface between box and PA system
« Reply #68 on: October 24, 2016, 01:01:30 AM »

It is the AKG B29L battery pack which has the XLR outputs and 9v battery. It seems to have been discontinued and replaced by B23L.
Thanks Bill, it is the B29L which I have.

I notice that the DC voltage is 9 volts, which may perhaps suit these particular mics - the usual level from a desk is around 48 volts, isn't it?
On the B29L I assume the switch for phantom power use brings in a suitable resistor to drop the voltage down to around 9v.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: The all-important interface between box and PA system
« Reply #69 on: October 24, 2016, 11:55:25 AM »

I played at a recent gig and took Ian's advice by increasing the mic distance from around 20 cm to 23 cm or so, both ends.  Yes, it works - after compensating by slightly adjusting the volume level, I found it was indeed noticeable that the box sound was more even, and more in keeping with the other instruments, particularly the violin.  As I run our sound desk onstage, and am very used to the balance of instruments in the mix, I am well-placed to appreciate the effect of these changes.  I can only say that I am very grateful to you, Ian, for your work on this.

For those using close mic'ing systems who are querying power supply issues, don't most mixers these days allow phantom power anyway?  The unit shown doesn't seem to allow eq'ing of each channel, just relative balancing.  I notice that the DC voltage is 9 volts, which may perhaps suit these particular mics - the usual level from a desk is around 48 volts, isn't it?  Looking at the description, I noticed this:  'an ideal way to mic up an accordion'.  It seems to me that that is quite an optimistic claim!

Glad that my advice helped :-)

Most decent mixers do supply 48V phantom power, and for most good ones it's switchable individually for each channel -- if it isn't, some electret mics (e.g. clip-ons) which aren't designed to have 48V shoved up them object by dying permanently. Go on, ask me how I now this...

If the new AKG B23L battery boxes have a stereo jack output, this is better than the old B29L ones in one way (keeps the bass and treble channels separate, sound guy will be happy) but worse in another (unbalanced non-XLR output on the old ones) -- but this is easily fixed. To go into a desk with balanced XLR inputs you need a stereo-3.5mm-jack to dual-1/4"-mono-jack lead (cheap) and a dual-channel DI box (relatively cheap) -- or where PA is provided just request 2 DI boxes for inputs.
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: The all-important interface between box and PA system
« Reply #70 on: October 24, 2016, 12:05:12 PM »

Many thanks Steve. I've put the orders in!

If you're using the C516, the best position for the mounting plates is on the outer edge of the top face of the box (not the front face), with the mics aimed downwards and slightly inwards so they point at the highest-pitched reeds towards the bottom of the box (same position for bass end).

This gives good even pickup across the range; the lowest notes are closer to the mic (louder) but also off-axis (quieter) which compensates for this. On the bass end the same happens to equalise the volume from sound holes at the top and bottom of the end plate.
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

Chris Brimley

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2038
Re: The all-important interface between box and PA system
« Reply #71 on: October 24, 2016, 01:17:41 PM »

Quote
Go on, ask me how I now this...

All right, Ian - how do you know this?
Logged

Chris Brimley

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2038
Re: The all-important interface between box and PA system
« Reply #72 on: October 24, 2016, 01:21:01 PM »

It seems to me Ian that you are suggesting a new idea here, that you can use the reduced off-axis sensitivity positively, by making the mic closer to the off-axis sound source.  So how does this work?
Logged

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: The all-important interface between box and PA system
« Reply #73 on: October 25, 2016, 10:55:28 AM »

Quote
Go on, ask me how I now this...

All right, Ian - how do you know this?

Hilda's concertina mics... :-(
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: The all-important interface between box and PA system
« Reply #74 on: October 25, 2016, 11:00:05 AM »

It seems to me Ian that you are suggesting a new idea here, that you can use the reduced off-axis sensitivity positively, by making the mic closer to the off-axis sound source.  So how does this work?

I don't think it's a new idea, it's kind of obvious -- at least, to me. A cardioid mic is 6dB down 90 degrees off axis, so if it's positioned so the closest reeds are 90 degrees off axis and half the distance to the mic compared to the furthest reeds which are on-axis, the volume will be the same.

Coincidentally, this is pretty much what you end up with using a mic like the C516 with a reasonably long gooseneck mounted on the top of the box -- in practice it might not be perfect, but it's *far* better than having it mounted on the front on the box and re-introducing the "close-mic" problem we discussed earlier.
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

Chris Brimley

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2038
Re: The all-important interface between box and PA system
« Reply #75 on: October 25, 2016, 11:15:03 AM »

Quote
I don't think it's a new idea, it's kind of obvious -- at least, to me.

Well it's still a useful and interesting contribution to the debate!  Have you looked at the C516 polar diagrams?  I have to say that I'm unconvinced their solution actually works, but I'd be very interested to hear your thoughts on this.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: The all-important interface between box and PA system
« Reply #76 on: October 25, 2016, 11:31:48 AM »

I can confirm it's not a new idea I've used a mic mounted like this for about 15 years.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Chris Brimley

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2038
Re: The all-important interface between box and PA system
« Reply #77 on: October 25, 2016, 11:45:45 AM »

OK, so how does it actually work?  I'm guessing that you're using one side of the mic, relying on the drop-off in sensitivity off-axis to try to extend the 'even response' length of the mic over the sound sources.  But surely, if you have a mic with that pattern of response, it's going to be equally responsive to sound from the other side of the mic, and therefore give you feedback problems?
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: The all-important interface between box and PA system
« Reply #78 on: October 25, 2016, 11:46:33 AM »

In practice it works well for me.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: The all-important interface between box and PA system
« Reply #79 on: October 25, 2016, 12:48:49 PM »

Quote
I don't think it's a new idea, it's kind of obvious -- at least, to me.

Well it's still a useful and interesting contribution to the debate!  Have you looked at the C516 polar diagrams?  I have to say that I'm unconvinced their solution actually works, but I'd be very interested to hear your thoughts on this.

Yes I've looked at the polar diagram, and it's "economical with the truth" -- it looks like the curves are hand-drawn, and no mic can have a pattern with 0dB loss out to 60 degrees and 6dB at 90 degrees, it's not physically possible...
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses
Pages: 1 2 3 [4] 5   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal