Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2 3   Go Down

Author Topic: Prices for fettling a box  (Read 7308 times)

0 Members and 1 Guest are viewing this topic.

Scobarandbar

  • Good talker
  • **
  • Offline Offline
  • Posts: 99
Prices for fettling a box
« on: September 16, 2016, 06:08:01 PM »

Hello all

Was wondering if there were any guide prices for getting work done to a melodeon.  I know it may be a bit of a sweeping statement to make as it depends on condition age and type of instrument.

Say if you took an instrument like a pokerwork or Erica and did things like...

1 Tuned up.
2 I know it may well be the same thing as number 1 but adjusting amount of tremolo.
3 Coverting a 3rd button start to a 4 with low/accidentals.
4 limiting amount of button movement and adding felts to reduce clicking of buttons.
5 All of the above!

6 converting a semitone box to a fourth tuned one (if that is possible)
7 converting a C/F to a D/G(if that is possible)

Thanks for your help and if it is a bit personal to ask approx. fettling prices on a public forum please excuse me.



Logged

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Prices for fettling a box
« Reply #1 on: September 16, 2016, 06:16:17 PM »

Although these prices would be of great interest to many members here, I really think that your last line is correct, and that it's not appropriate to expect fettlers to answer in the open forum. Would it not be best to pm them via their contacts to be found on the home page?
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Scobarandbar

  • Good talker
  • **
  • Offline Offline
  • Posts: 99
Re: Prices for fettling a box
« Reply #2 on: September 16, 2016, 06:22:12 PM »

Thanks for your reply Edward.  I will do that and please let me ask that I don't need any more replies.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Prices for fettling a box
« Reply #3 on: September 16, 2016, 06:25:51 PM »

Speaking as a repairer myself,  and knowing most of the others in the UK I think you will find us all quite approachable and friendly.   There are too many variables in the tasks you have quoted to give a table of costs. As well as cost you need also to ask about time scale for doing the work. Often there will be a wait of some weeks or even months.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Scobarandbar

  • Good talker
  • **
  • Offline Offline
  • Posts: 99
Re: Prices for fettling a box
« Reply #4 on: September 16, 2016, 06:34:08 PM »

Speaking as a repairer myself,  and knowing most of the others in the UK I think you will find us all quite approachable and friendly.   There are too many variables in the tasks you have quoted to give a table of costs. As well as cost you need also to ask about time scale for doing the work. Often there will be a wait of some weeks or even months.

Thanks Theo. 

I will contact you next week. 

I don't have a box yet but no one seems to have what I am looking for on here so it was a thought of getting something and then getting it sorted afterwards.
« Last Edit: September 16, 2016, 06:36:50 PM by Scobarandbar »
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Prices for fettling a box
« Reply #5 on: September 16, 2016, 06:37:37 PM »

Try posting a wanted ad on the Buy and Sell forum?
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

John MacKenzie (Cugiok)

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2360
  • Fettling... Learning to reed and right.
Re: Prices for fettling a box
« Reply #6 on: September 16, 2016, 06:39:29 PM »

One other aspect. If you find a fettler whose work you like, you may and up using them exclusively, never mind the cost  >:E


Sir John  :|glug
Logged
There is no beginning to my talent :)



: Hohner Club Modell 1. Bb/Eb, de-clubbed : Early Hohner Pressed Wood A/D : 1930's Varnished wood G/C:  Hohner Erika C/F: Bandoneon tuned D/G Pressed wood: Koch F/Bb; G/C Pre Corso

Andy

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 159
Re: Prices for fettling a box
« Reply #7 on: September 16, 2016, 07:52:47 PM »


Say if you took an instrument like a pokerwork or Erica and did things like...


Are these things which you plan to get done if the price makes it viable? - In which case go ahead get quotes. For some of the work I would not expect a firm price until the repairer has seen the box and is able to fully appraise it. This is fairly reasonable - even if a customer is being entirely honest they may not be aware of any additional work required.

If you are only curious, with no realistic intentions of getting the work done, it would not really be fair to go to ask a repairer to go to the length of preparing a quote. Having said that I'm not an accordion repairer - just know that in any field a realistic quote does take time.
Logged

Grape Ape

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1209
Re: Prices for fettling a box
« Reply #8 on: September 16, 2016, 08:22:50 PM »

I am guessing the OP is just looking for ballpark figures and not an exact price quote.  I too would be interested in the answer.
Logged

Scobarandbar

  • Good talker
  • **
  • Offline Offline
  • Posts: 99
Re: Prices for fettling a box
« Reply #9 on: September 16, 2016, 09:06:27 PM »


Say if you took an instrument like a pokerwork or Erica and did things like...


Are these things which you plan to get done if the price makes it viable? - In which case go ahead get quotes. For some of the work I would not expect a firm price until the repairer has seen the box and is able to fully appraise it. This is fairly reasonable - even if a customer is being entirely honest they may not be aware of any additional work required.

If you are only curious, with no realistic intentions of getting the work done, it would not really be fair to go to ask a repairer to go to the length of preparing a quote. Having said that I'm not an accordion repairer - just know that in any field a realistic quote does take time.

Hi Andy

I had said in my previous posts in this thread that I don't have a box.  It was to find how much melodeon work costs or do you think it is it better to just to get a new one and get it tuned if need be to save hassle and fettling expense?
Logged

John MacKenzie (Cugiok)

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2360
  • Fettling... Learning to reed and right.
Re: Prices for fettling a box
« Reply #10 on: September 16, 2016, 09:15:16 PM »

Well that's not necessarily true. Some new melodeons need tuning before they are playable. Some costalottis are just that, expensive, and may not fit the bill for everybody. My recommendation, for what it's worth, is to look for a used box, that has been fettled by one of our many "ace fettlers". That way, you know what you're getting, and have someone to refer back to, if you have any problems.
Just my tuppence worth !!


Sir John
Logged
There is no beginning to my talent :)



: Hohner Club Modell 1. Bb/Eb, de-clubbed : Early Hohner Pressed Wood A/D : 1930's Varnished wood G/C:  Hohner Erika C/F: Bandoneon tuned D/G Pressed wood: Koch F/Bb; G/C Pre Corso

playandteach

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3526
  • Currently a music teacher in a high school.
Re: Prices for fettling a box
« Reply #11 on: September 16, 2016, 11:53:36 PM »

Firstly, unlike getting a plumber from the paper, the repairers here won't fix stuff that isn't in need of a fix, and will advise you and check with you on your journey.
If you are asking: should I buy an old beaten up thing cheaply and save money by getting someone to fix it up - it won't necessarily be cheaper, but it will likely be better than buying a Chinese modern melodeon - I can't believe how much I like my old Erika, and there is a buzz that comes from saving an good instrument from the scrapyard.
Even more likely is that you will create a bond with your repairer that will last many years, supporting a craftsman, getting free advice from time to time. And avoiding expensive mistakes occasionally.
Is it cheaper to have coffee at home? Absolutely. Is it better to have it out - well I live in a town that has multiple hairdressers and coffee shops (neither being available online) and I really enjoy being served coffee, the surroundings, being recognised and the exact coffee I want brought to me without asking etc. etc. On the other hand I wish I could cut my own hair.
Logged
Serafini R2D2 GC, Serafini GC accs 18 bass

Harmonicatunes

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 261
    • Harmonicatunes
Re: Prices for fettling a box
« Reply #12 on: September 17, 2016, 02:33:12 AM »

Two points.

First, my experience with various fettlers is that they provide excellent value. However, as a new player, finding the right second box has pitfalls. I speak from experience here.

Second, if you're a new player, consider getting a second hand box that has been fixed up by someone known to this forum. The Buy section on this forum often has these. Or, just visit Theo's online store at http://www.theboxplace.co.uk/purchase/melodeons/cat_9.html This is the easiest, and to my mind the best option

Logged
Harmonica Player
Just starting with the Box

Matthew B

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 894
Re: Prices for fettling a box
« Reply #13 on: September 17, 2016, 04:10:35 AM »

consider getting a second hand box that has been fixed up by someone known to this forum

Yes. 

Also worth bearing in mind is that the folks who fix boxes and are active here typically have a stock of relics that can be rehabilitated to order.  So you can go and hunt out your own rough diamond, or you can save yourself a lot of time, and just make a few calls. 

Antique melodeon restoration for the British traditional music market is not an area of commerce that screams "QUICK CASH", so I think you can be confident that you will not encounter too many chancers and rascals.   
Logged
Charter Member Presumpscot and Fore River Accordion Club

Thrupenny Bit

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 7232
  • happily squeezing away in Devon
Re: Prices for fettling a box
« Reply #14 on: September 17, 2016, 09:34:40 AM »

Looking at some of your original questions, I'd do a bit of homework and narrow down some of those options to save money later.
I.e. Changing the key of an instrument can be costly to the point of uneconomic.
Easier done on an old Hohner where a fetttler might have built up a stock of old reeds in different keys, but more costly on a more expensive box where reed sets could be very expensive.
You're better to buy something in the keys  you're going to play in, and that depends on the music you want to play.

Changing from 3rd to 4th button start is what I did to my first box after using it for a little while.
It is more expensive than just a tune up as you have to move every reed down one slot in the reed block and maybe alter the size of the chamber where it fits.
If you can buy a box that has this done, if that is what you want, then it saves you a bit later on. I knew I would keep mine so was happy to invest in it and change from 3rd to 4th button. For years people used 3rd button starts as that's how they came. It made sense to me to change but many don't feel the need, or maybe leave it 'for their next box'.

As said, I think trying to and narrow down your options to which keys you want will be a good step forward, and that all comes down to what music you want to play.
Cheers
Q

Logged
Thrupenny Bit

I think I'm starting to get most of the notes in roughly the right order...... sometimes!

Scobarandbar

  • Good talker
  • **
  • Offline Offline
  • Posts: 99
Re: Prices for fettling a box
« Reply #15 on: September 19, 2016, 05:27:51 PM »

Thank you for all of your help and advice. 

I have been in touch with Theo today so all good.
Logged

LadyEleanore

  • Good talker
  • **
  • Offline Offline
  • Posts: 62
Re: Prices for fettling a box
« Reply #16 on: September 20, 2016, 12:40:32 PM »

I am guessing the OP is just looking for ballpark figures and not an exact price quote.  I too would be interested in the answer.

Me too. I was a little disappointed with the 'get a quote' answer although do understand the the OP was a complex one.  I'm interested in roughly how much it would cost to get a thirds stop fitted to the bass on my box just as a matter of interest as someone's mentioned it as a good idea.
Logged
Morris dancer, flute and whistle player and improving player. Castagnari Rik, Excelsior Bilbo

Clive Williams

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3936
    • Home Page
Re: Prices for fettling a box
« Reply #17 on: September 20, 2016, 12:54:52 PM »

OK, then - as a 'user' who's had rather a large number of boxes through quite a few of the different fettlers in the UK over the years, I've had work done ranging from about £50 for very simple jobs to several hundred pounds labour costs for some serious reworking.

Things such as 'can you change the key of the instrument' up the cost considerably beyond that, since depending on the request, you would need new reeds to be sourced, but some conversions (C/F to D/G for example) may require much fewer new reeds if reeds are reorganised cunningly.

Personally, whenever I see a fettler's invoice, my usual reaction is 'how on earth can you make a living', when you consider how many hours they must have spent on it.

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Prices for fettling a box
« Reply #18 on: September 20, 2016, 01:36:52 PM »

"'how on earth can you make a living', when you consider how many hours they must have spent on it."

Generally, they don't. Contrary to popular belief, self-employed folk in the UK struggle! It's been my experience that a great many self-employed people regularly, if not usually, undercharge for their time and skills, simply because they want to feel that they give good value for money. Whilst their clients, who very often have well paid employment, are quite happy to take advantage of the situation. (Speaks one who was self-employed for 40 tears!)
I'd be astonished if any of the renowned fettlers on here had had "accordion fettling" as their only employment since leaving school. But I'm always willing to be proven wrong, of course.
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Microbot

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 345
Re: Prices for fettling a box
« Reply #19 on: September 20, 2016, 01:57:39 PM »

Hi all,

here's a classic example of a job which may appear to require a simple quote, but does not.

[/quote] I'm interested in roughly how much it would cost to get a thirds stop fitted to the bass on my box just as a matter of interest as someone's mentioned it as a good idea.
[/quote]

I charge £80 to fit a thirds pullstop to an 8-bass Hohner that I am overhauling/setting up. However, I charge £100 to fit a pullstop to a similar instrument if it is a 'retro-fit' and I haven't got the box dismantled anyway for overhaul.

A good part of the work with such a Hohner involves getting the thirds onto the same reedplate on press and draw (the remainder is for fitting rails/slider/block/pullstop+fine-tuning). Because of the reedwork, the price for a non-Hohner instrument which already has thirds on the same reedplate may be cheaper ... alternatively the internal construction of the instrument may make it as/more expensive for other reasons.

Then the instrument may be a 12-bass= more reedwork/less room and more complex fitting

Then the instrument may be in poor condition and need re-valving/waxing ... I'm not putting all the above pull-stop work (plus my reputation) into a box that plays poorly because other work needs doing!

As another example, I recently had a Liliput sent to me for conversion to D/G that the owner had been told 'required no work' ... with the expactation that at least the reeds had already been cleaned and revalved. I had to advise the owner that, in fact, only the outer reeds had been revalved, and with valves that were too heavy... the inner/draw reeds still had the original leathers. I'll need to strip the reeds entirely ... and wade through sticky wax in cleaning the blocks...!

You need to see an instrument to give a quote although I try to give close/ballpark figures in conversation with a potential customer. But as Theo said previously, the range of jobs/variables/models/condition make it meaningless to give a list of prices as sought in the original question.

cheers!

Mike R
Logged
Pages: [1] 2 3   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal