Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 2 [3]   Go Down

Author Topic: Prices for fettling a box  (Read 7327 times)

0 Members and 1 Guest are viewing this topic.

Andy

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 159
Re: Prices for fettling a box
« Reply #40 on: September 21, 2016, 05:42:18 PM »

It has been pretty heated on here and if anything I have said has caused offence to anyone I apologise

I would just like to clarify that I fully understand why a repairer might not wish to post a list of prices (even ballpark) for the seven jobs in the OP. I consider this to be a reasonable position.

Equally if a repairer were to decide to provide ballpark prices for some or all of the jobs, I would in no way criticise this.

Chers
Andy


Logged

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: Prices for fettling a box
« Reply #41 on: September 21, 2016, 10:20:17 PM »

It has been pretty heated on here and if anything I have said has caused offence to anyone I apologise

I would just like to clarify that I fully understand why a repairer might not wish to post a list of prices (even ballpark) for the seven jobs in the OP. I consider this to be a reasonable position.

Equally if a repairer were to decide to provide ballpark prices for some or all of the jobs, I would in no way criticise this.

Chers
Andy

Theo has now rebuilt two boxes for me -- one (Preciosa de-clubbed, changed from C/F to D/G, bass thirds swapped for fifths, tuned, new valves, pallets refacing) cost about what he predicted, since this was a familiar job that he'd done many times before on Preciosas and knew what to expect (after I'd sent him photos of the inside).

The second (Melos Bb/Eb declubbed, retuned, changed accidentals, thirds swapped for fifths) turned out to be a bit more of a can of worms on a box he'd never seen before (nor has anyone else...) which ended up taking more time -- and costing more! -- than the Preciosa, in spite of the fact that the key was left unchanged.

So what looked like a simpler (and cheaper) job turned out to be a more expensive one, simply because it took more time. I don't regret it or begrudge what Theo charged even though it was more than I was expecting, I've ended up with a fantastic box which I love to bits.

For anyone contemplating having an old box rebuilt there's a big margin of error on any time/effort estimate, and I expect that all the fettlers basically charge by materials and time spent, and the bill in the end will basically be what it is -- anyone who can't live with this uncertainty should buy a new box :-)
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

playandteach

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3526
  • Currently a music teacher in a high school.
Re: Prices for fettling a box
« Reply #42 on: September 21, 2016, 10:30:39 PM »

anyone who can't live with this uncertainty should buy a new box :-)
buying new doesn't always mean securing exactly what you want or expected.
Logged
Serafini R2D2 GC, Serafini GC accs 18 bass

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: Prices for fettling a box
« Reply #43 on: September 21, 2016, 10:32:03 PM »

anyone who can't live with this uncertainty should buy a new box :-)
buying new doesn't always mean securing exactly what you want or expected.
...but you do know what the price will be, which is what was being discussed ;-)
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

playandteach

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3526
  • Currently a music teacher in a high school.
Re: Prices for fettling a box
« Reply #44 on: September 21, 2016, 10:34:13 PM »

anyone who can't live with this uncertainty should buy a new box :-)
buying new doesn't always mean securing exactly what you want or expected.
...but you do know what the price will be, which is what was being discussed ;-)
True.
Logged
Serafini R2D2 GC, Serafini GC accs 18 bass

invadm

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 613
Re: Prices for fettling a box
« Reply #45 on: September 21, 2016, 11:01:25 PM »



I saw that very price list myself just two days ago when I visited Martyn to pick up my lovely red Liliput. Did I not mention the red Liliput yet? >:E  Probably too busy playing it.

So... hey, I got a red Bb/Eb Liliput from Martyn White - this is one of the boxes on my 'melodeon rocking horse poo' box list.
[/quote]
red liliyput is good but twin red Bb/Eb liliyput even better   ;) ;) ;)
there is a list of fettelers on this forum,just call or email them and they will be more than happy to help.
Logged

Andy

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 159
Re: Prices for fettling a box
« Reply #46 on: September 22, 2016, 12:08:03 AM »


Theo has now rebuilt two boxes for me -- one (Preciosa de-clubbed, changed from C/F to D/G, bass thirds swapped for fifths, tuned, new valves, pallets refacing) cost about what he predicted, since this was a familiar job that he'd done many times before on Preciosas and knew what to expect (after I'd sent him photos of the inside).

The second (Melos Bb/Eb declubbed, retuned, changed accidentals, thirds swapped for fifths) turned out to be a bit more of a can of worms on a box he'd never seen before (nor has anyone else...) which ended up taking more time -- and costing more! -- than the Preciosa, in spite of the fact that the key was left unchanged.

So what looked like a simpler (and cheaper) job turned out to be a more expensive one, simply because it took more time. I don't regret it or begrudge what Theo charged even though it was more than I was expecting, I've ended up with a fantastic box which I love to bits.

For anyone contemplating having an old box rebuilt there's a big margin of error on any time/effort estimate, and I expect that all the fettlers basically charge by materials and time spent, and the bill in the end will basically be what it is -- anyone who can't live with this uncertainty should buy a new box :-)
Yes Ian
Theo converted a Double Ray Deluxe (BC) bases from old Hohner basses to Modern basses for me. I only had to send him the bass reed blocks to work on (a relief as it saved the cost and risk of posting the whole melodeon) The cost was, I think, exactly as estimated. I don't think there were any hidden nasties in the reeds. However the reed blocks were sent on the understanding that the price was not fixed if any additional work was required or if reeds were not fit for retuning and reuse. I consider this entirely reasonable.
The modification was well worth having done. Great old Hohner sound intact, tidy work and a much more useful set of basses.
Logged

LadyEleanore

  • Good talker
  • **
  • Offline Offline
  • Posts: 62
Re: Prices for fettling a box
« Reply #47 on: October 03, 2016, 02:23:35 PM »

I am guessing the OP is just looking for ballpark figures and not an exact price quote.  I too would be interested in the answer.

Me too. I was a little disappointed with the 'get a quote' answer although do understand the OP was a complex one.  I'm interested in roughly how much it would cost to get a thirds stop fitted to the bass on my box just as a matter of interest as someone's mentioned it as a good idea.
Hi - Sorry didn't mean to put a damper on things, the questions are still out there and if anyone is sufficiently well informed and brave enough to venture even ballpark estimates they still can - I too would be interested.

Mike Rowbotham's already given you a bit of an idea. How much more ballpark do you want?

here's a classic example of a job which may appear to require a simple quote, but does not....

I charge £80 to fit a thirds pullstop to an 8-bass Hohner that I am overhauling/setting up. However, I charge £100 to fit a pullstop to a similar instrument if it is a 'retro-fit' and I haven't got the box dismantled anyway for overhaul.

A good part of the work with such a Hohner involves getting the thirds onto the same reedplate on press and draw (the remainder is for fitting rails/slider/block/pullstop+fine-tuning). Because of the reedwork, the price for a non-Hohner instrument which already has thirds on the same reedplate may be cheaper ... alternatively the internal construction of the instrument may make it as/more expensive for other reasons.

Then the instrument may be a 12-bass= more reedwork/less room and more complex fitting

Then the instrument may be in poor condition and need re-valving/waxing ... I'm not putting all the above pull-stop work (plus my reputation) into a box that plays poorly because other work needs doing!

You need to see an instrument to give a quote although I try to give close/ballpark figures in conversation with a potential customer. But as Theo said previously, the range of jobs/variables/models/condition make it meaningless to give a list of prices as sought in the original question.

It's not a question of whether a repairer/fettler is "sufficiently well informed or brave enough" to give a ballpark figure. I find that insinuation almost insulting, especially in the light of what has already been said in this thread. Why can't you accept that there are simply too many variables which will prevent a meaningful answer being given? The repairer/fettler needs to have the instrument in their hands to see what needs doing. Why is that seemingly so hard to understand?

Hopefully, this thread has now run its course.
I just noticed this response which has my comment in there.  If the 'how much more ballpark do you want' is directed at me, you'll notice that the quote you've used came in later than my comment.  Thank you for picking up on that as I'd missed the info. It's exactly the kind of info I needed.  I expect that the OP has his own reasons for wanting a rough guide but mine are that I am retired and so knowing the rough guide means that I don't have to waste anyone's time, including my own,  on something that is out of my budget.  It's not uncommon in some professions to give a price list with a proviso that it could cost more under the bonnet (dentists and mechanics do it all the time :)
Logged
Morris dancer, flute and whistle player and improving player. Castagnari Rik, Excelsior Bilbo
Pages: 1 2 [3]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal