Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: Adding playing directions at the start of a tune  (Read 7667 times)

0 Members and 1 Guest are viewing this topic.

dave t

  • Good talker
  • **
  • Offline Offline
  • Posts: 92
  • DB Oakwood Super III/Pastourelle II
Adding playing directions at the start of a tune
« on: September 18, 2016, 09:19:34 AM »

Sorry if this is a basic question but I couldn't find a satisfactory answer online. I'm using EasyABC on Mac and I would like to add a written note at the start of a tune to give playing instructions, particularly in relation to hornpipes that are written straight but are played 'dotted'. I have two examples below of how I have tried to solve the problem.

X:28
T:The Harp and the Shamrock
L:1/8
M:4/4
R:Hornpipe
N:
K:G
"^(Play Dotted)" gf | "G" edBc "Em" dBGB | "C"AGEF"D" GA (3Bcd |"C" e2  d"Em" efge |"G" dBAG A2"D" BA |

X:28
T:The Harp and the Shamrock
L:1/8
M:4/4
R:Hornpipe
N:
K:G
gf |"^(Play Dotted)" "G" edBc "Em" dBGB | "C"AGEF"D" GA (3Bcd |"C" e2  d"Em" efge |"G" dBAG A2"D" BA |

The first one has the playing direction but it appears below the level of the chords and pushes them up a line. In the second example, the direction is above the chords, where I want it to be, but I was only able to achieve that by putting it above the first chord rather than at the start of the music as there is an upbeat.

Is there a better way of doing this?

Thanks, Dave
Logged

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Adding playing directions at the start of a tune
« Reply #1 on: September 18, 2016, 10:58:35 AM »

Your method works but if I have directions or instructions, e.g. playing order, etc. which I want to add to a tune, I often use the W: field format at the end of the tune, like this:

X:28
T:The Harp and the Shamrock
L:1/8
M:4/4
R:Hornpipe
N:
K:G
gf | "G" edBc "Em" dBGB | "C"AGEF"D" GA (3Bcd |"C" e2  d"Em" efge |"G" dBAG A2"D" BA |
W:
W:Play dotted
W:This is an example of how to use the W field
W:Ensure that you use an upper-case W, not lower-case.
W:A W field followed by no text simply inserts a blank line, which is often useful to separate the instructions from the tune notation
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

dave t

  • Good talker
  • **
  • Offline Offline
  • Posts: 92
  • DB Oakwood Super III/Pastourelle II
Re: Adding playing directions at the start of a tune
« Reply #2 on: September 18, 2016, 02:26:04 PM »

Thanks Steve, that's definitely a useful one to know. However, I would have liked to put the instruction at the top of the tune. The issue that I have with the method that I put in the original post is that I can't find a way to put the instruction at the very start of the tune but above rather than below the chord symbols. I guess what I'm looking for is a W field that acts at the start and not the end of the tune.

Cheers, Dave
Logged

TomBom

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 471
Re: Adding playing directions at the start of a tune
« Reply #3 on: September 18, 2016, 03:50:24 PM »

You could use %% text :

Code: [Select]
X:28
T:The Harp and the Shamrock
L:1/8
M:4/4
R:Hornpipe
N:
K:G
%% text Play Dotted
gf | "G" edBc "Em" dBGB | "C"AGEF"D" GA (3Bcd |"C" e2  d"Em" efge |"G" dBAG A2"D" BA |
Logged

dave t

  • Good talker
  • **
  • Offline Offline
  • Posts: 92
  • DB Oakwood Super III/Pastourelle II
Re: Adding playing directions at the start of a tune
« Reply #4 on: September 18, 2016, 03:55:32 PM »

That's exactly what I was looking for. Thanks TomBom!
Logged

Anahata

  • This mind intentionally left blank
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6767
  • Oakwood D/G, C/F Club, 1-rows in C,D,G
    • Treewind Music
Re: Adding playing directions at the start of a tune
« Reply #5 on: September 18, 2016, 04:40:35 PM »

Also when there are several line of text
%%begintext
lots of text
which can be written
on more than one line
%%endtext

Various formatting options are shown at http://abcnotation.com/wiki/abc:standard:v2.1#text_directives
Logged
Слава Україні !
Music recording and web hosting: www.treewind.co.uk
Mary Humphreys and Anahata: www.maryanahata.co.uk
Ceilidh band: www.barleycoteband.co.uk

ChrisP

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 279
  • West Yorkshire, UK
    • Chris Partington
Re: Adding playing directions at the start of a tune
« Reply #6 on: September 19, 2016, 06:20:41 PM »

Or you could just write the tune dotted.

Jack Campin

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 764
    • Jack Campin's Home Page
Re: Adding playing directions at the start of a tune
« Reply #7 on: September 20, 2016, 08:31:05 AM »

Or do what some Bartok-inspired ethnomusicological transcribers do and use triplet-beamed crotchet-quaver pairs...

Which rather misses the point. If you're in a position to make any effective use of notation for a hornpipe, you'll know the rhythm and it won't make any difference if it's written straight or curly. A notated score is not a recording done on paper.
Logged
http://www.campin.me.uk/

I can't figure out how to quit but I will no longer check this group and have deleted all shortcuts to it.

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Adding playing directions at the start of a tune
« Reply #8 on: September 20, 2016, 09:31:41 AM »

The trouble is that some hornpipes are nearly always traditionally played dotted, others are nearly always played straight. And a few are sometimes played either way!
So for someone who may be uncertain just how a particular tune goes, it does help to have the 'correct' notation indicated on written music.

In traditional music the notated dotted quaver-semiquaver pair is never played as it is in classical music (i.e. 3 tied semiquavers and one separate semiquaver); it is nearly always the swing triplet thing: lah-di dah-di, lah-di dah-di, which even if you use the Bartok inspired notation that Jack mentions, can start to look messy or untidy. I usually get round this by notating the tune in dotted quaver-semiquaver pairs and adding an explanatory equality expression just above the first bar of the piece, near where a tempo marking goes (if shown).

See attached...
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Anahata

  • This mind intentionally left blank
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6767
  • Oakwood D/G, C/F Club, 1-rows in C,D,G
    • Treewind Music
Re: Adding playing directions at the start of a tune
« Reply #9 on: September 20, 2016, 10:52:31 AM »

That's clever - I had to do a bit of research to ascertain that ABC's "Q:" header notation enables you to do something like that (:)
Logged
Слава Україні !
Music recording and web hosting: www.treewind.co.uk
Mary Humphreys and Anahata: www.maryanahata.co.uk
Ceilidh band: www.barleycoteband.co.uk

dave t

  • Good talker
  • **
  • Offline Offline
  • Posts: 92
  • DB Oakwood Super III/Pastourelle II
Re: Adding playing directions at the start of a tune
« Reply #10 on: September 20, 2016, 02:10:43 PM »

In answer to ChrisP, I don’t like writing hornpipes as dotted for the reasons outlined by Steve. Whether you are notating the rhythm with straight quavers or dotted quaver/semiquaver, you are equally ‘wrong’ in terms of what is actually being played. Writing in 12/8 is closer to the actual rhythm but in practice, if it is written in 4/4 it usually for easier for most people to read. Jazz has a similar problem when it comes to notation and neatly solves it by notating everything as ‘straight’ and leaving the performer to add the swing. A written direction at the start of the music may indicate that this is how it has been notated but it is often implicit.

As Jack rightly says “a notated score is not a recording done on paper.”

Dave

PS The pedant in me can’t help but point out that even Steve’s example is wrong. It should dotted quaver/semiquaver = triplet crotchet/quaver and not triplet quaver/semiquaver.
Logged

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Adding playing directions at the start of a tune
« Reply #11 on: September 20, 2016, 03:09:13 PM »

PS The pedant in me can’t help but point out that even Steve’s example is wrong. It should dotted quaver/semiquaver = triplet crotchet/quaver and not triplet quaver/semiquaver.

Yes you are correct; and would you believe I had it as triplet crotchet/quaver first of all and then changed it because it didn't look right!  :-[
Like this then...
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

dave t

  • Good talker
  • **
  • Offline Offline
  • Posts: 92
  • DB Oakwood Super III/Pastourelle II
Re: Adding playing directions at the start of a tune
« Reply #12 on: September 20, 2016, 04:02:44 PM »

Are you going to let us in on the secret of how you did this using the Q field then Steve?  ???
Logged

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Adding playing directions at the start of a tune
« Reply #13 on: September 20, 2016, 05:43:43 PM »

Are you going to let us in on the secret of how you did this using the Q field then Steve?  ???

Confession time...
I didn't use ABC. :|bl  I used MuseScore, which I have taken to using more and more these days. So much more versatile.
However, it would appear that Anahata has found out how to do it in ABC by magical editing of the Q field. Perhaps he can please enlighten us...
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Anahata

  • This mind intentionally left blank
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6767
  • Oakwood D/G, C/F Club, 1-rows in C,D,G
    • Treewind Music
Re: Adding playing directions at the start of a tune
« Reply #14 on: September 20, 2016, 09:04:55 PM »

Actually I didn't try that exact pattern, and now have tried it, I find it doesn't work   :|bl
I can get two notes before the = sign, but only one after.
So, musescore FTW!
Logged
Слава Україні !
Music recording and web hosting: www.treewind.co.uk
Mary Humphreys and Anahata: www.maryanahata.co.uk
Ceilidh band: www.barleycoteband.co.uk

playandteach

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3526
  • Currently a music teacher in a high school.
Re: Adding playing directions at the start of a tune
« Reply #15 on: September 20, 2016, 10:49:22 PM »

Remind me again (I seem to think it has been explained before) why we need abc, rather than a notation package, or pdfs of scores done in standard notation?
Logged
Serafini R2D2 GC, Serafini GC accs 18 bass

Jack Campin

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 764
    • Jack Campin's Home Page
Re: Adding playing directions at the start of a tune
« Reply #16 on: September 20, 2016, 11:59:19 PM »

Flexibility and durability. It's much easier to pass around, transform and modify, and it won't stop being usable when some software product goes obsolete.

Using fancy features unique to abcm2ps negates those advantages, though.  Which is why I don't use them.
Logged
http://www.campin.me.uk/

I can't figure out how to quit but I will no longer check this group and have deleted all shortcuts to it.

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Adding playing directions at the start of a tune
« Reply #17 on: September 21, 2016, 07:54:16 AM »

Remind me again (I seem to think it has been explained before) why we need abc, rather than a notation package, or pdfs of scores done in standard notation?

I have 4 abc files on my phone totalling about 700 tunes, these are tunes I 'mostly' know but need a reminder of to play. They are presented in an app that allows me to quickly search for tune names, see the abc (I play directly from abc as I can't really read music) and, if need be, get my phone to beep the tune at me. I get all this for free. Not sure of any other method that meets these options.

Anahata

  • This mind intentionally left blank
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6767
  • Oakwood D/G, C/F Club, 1-rows in C,D,G
    • Treewind Music
Re: Adding playing directions at the start of a tune
« Reply #18 on: September 21, 2016, 08:13:06 AM »

Despite my previous remark, I'm a fan and constant user of ABC.
I like that it's platform neutral, and the code can be typed in by hand, and that it NOT a 'notation package'.
It covers most of the requirements for folk music and a lot more, and it's already widely used.

As for abcm2ps, I don't think it does much that isn't in the ABC 2.1 standard.

As for alternatives, Musescore would be my second choice because it's multi platform and free.
But at a pinch, if somebody posts a bar or two of ABC to illustrate something here I can read it, whereas I'd have to be very motivated indeed to download a Musescore attachment and open it to find out what it was.
Also I've seen some horrible output from scoring packages that I'm sure weren't ABC based - they are far from perfect.

Quote
PDF of scores done in standard notation
That's exactly what I use if I'm emailing somebody some music, unless I know they are familiar with ABC, but it's avoiding the question of how you create the PDF in the first place. I make my music PDFs from ABC sources! (abcm2ps, followed by ps2pdf, wrapped in a couple of simple shell scripts to minimise the typing)

Admittedly I'm biased:
- I'm a programmer, so I'm used to typing and reading code.
- I've spent much more time (many years)  using ABC than I have trying to learn Musescore
- I'm generally an advocate of open standards and free software
- I'm a Linux user, so I'm used to command line interfaces that actually do useful work
Logged
Слава Україні !
Music recording and web hosting: www.treewind.co.uk
Mary Humphreys and Anahata: www.maryanahata.co.uk
Ceilidh band: www.barleycoteband.co.uk

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Adding playing directions at the start of a tune
« Reply #19 on: September 21, 2016, 09:48:50 AM »

Just to set the record straight, I still use ABC a lot and I like its convenience and advantages which have been pointed out by others.

However I really like MuseScore too. It is open source freeware and is constantly being refined and tweaked. There is a nightly upgrade available from the developer community if you choose to go that way. Otherwise the current standard version is very stable and comprehensive. It is available for PC, Mac and Linux platforms.

As an arranger and transcriber (and sometimes composer  :o ), I find MuseScore very good indeed and it hasn't really taken me too long to get proficient in using it. If you read music, it is pretty intuitive to learn. MuseScore can also import and edit ABC files.

I've attached a couple of MuseScore examples which perhaps illustrate why I like it so much. (1) a version of Michael Turner's Waltz which I used for my beginners' workshop in Whitby this year. In MuseScore it was easy to add chords and fingering numbers to the tune. (2) the first page of the full score of my transcription of The King's Morisco for four clarinets. It has a full range of dynamics, articulations, ornaments, instructions, etc.

You could probably do both examples in ABC, but the King's Morisco especially would be a real challenge and I suspect not worth the effort, as it would be trying to take ABC to extremes for which it was never designed or envisaged.

So it's very much horses for courses. If ABC suits your purposes, that's fine; and it's usually great for single-stave traditional music. But if you need to deal with anything a bit more detailed or complex, MuseScore is worth a look. I use both and am a happy bunny*.



* Please may we have a Happy Bunny emoticon?
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal