Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Glue for loose bellows corner  (Read 2872 times)

0 Members and 1 Guest are viewing this topic.

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Glue for loose bellows corner
« on: June 28, 2009, 12:17:38 PM »

I'm sure this has been asked before but searching the forums didn't turn up an answer...

What's the best glue for regluing a loose bellows corner? (on a friend's Serenellini)

Ian
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

streb

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 100
Re: Glue for loose bellows corner
« Reply #1 on: June 28, 2009, 03:38:55 PM »

For gluing the cardboard bellows folds to the wooden bellows frame the italian makers recommend a vinyl-based glue. I use "Polyvine" available from Axminster. Apply a generous amount, compress the join and wipe off the excess with a damp cloth. It dries clear in a few hours. I would try to remove as much of the old glue as possible beforehand though. Hope this helps.

Steve
Logged

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: Glue for loose bellows corner
« Reply #2 on: June 28, 2009, 04:56:49 PM »

For gluing the cardboard bellows folds to the wooden bellows frame the italian makers recommend a vinyl-based glue. I use "Polyvine" available from Axminster. Apply a generous amount, compress the join and wipe off the excess with a damp cloth. It dries clear in a few hours. I would try to remove as much of the old glue as possible beforehand though. Hope this helps.

Steve

Sorry if I wasn't clear -- it's one of the metal bellows corners that's come loose.

Ian
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

streb

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 100
Re: Glue for loose bellows corner
« Reply #3 on: June 28, 2009, 05:26:31 PM »

In that case probably Bostik or UHU.
Logged

Prestidigitator

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 448
  • Saltarelle, Hohner, Oakwood Baffetti
Re: Glue for loose bellows corner
« Reply #4 on: June 29, 2009, 08:07:46 AM »

I'd always thought that they were just crimped on, and not glued.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Glue for loose bellows corner
« Reply #5 on: June 29, 2009, 09:30:39 AM »

They are when new, but unless you have the crimping machine a replacemet corner needs glue to help keep it in place.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Prestidigitator

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 448
  • Saltarelle, Hohner, Oakwood Baffetti
Re: Glue for loose bellows corner
« Reply #6 on: June 29, 2009, 10:07:46 AM »

They are when new, but unless you have the crimping machine a replacemet corner needs glue to help keep it in place.

Theo,
I mention it because I had one come off when I was retaping bellows. I opened it out slightly with the flat of a screwdriver and squeezed it back on with a hefty pair of pliers; using a piece of scrap leather over it to avoid marking it.
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal