Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Pokerwork incident  (Read 1998 times)

0 Members and 1 Guest are viewing this topic.

Scallyanglo

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 106
  • Baffetti/Oakwood Binci Pariselle 2.6 LM 14 bass
Pokerwork incident
« on: June 29, 2009, 10:22:33 AM »

A bag strap gave way and the whole thing fell to the floor - landing treble keyboard edge-on. The bag was reasonably padded, but when I took the (new, Chinese) pokerwork out it gave a long wail as I let air in. After some deep breathing - both me & the box - this stopped, and it doesn't do it now.

I took the grill off and saw that the high A read (I think - 3rd from bottom) on the D row was only just covering the whole. I guess when it fell, it moved a bit.

So the box plays OK, no squeaking etc but . . .but . . doesn't feel quite like it did - it seems less clicky, (which I liked!) with the button action 'deadened'. The keyboard moves a tiny bit, the buttons on the D row are all standing at a slightly different height (the high A being much the highest) - but I can't say whether this is a result of the 'incident', or I just didn't notice it before.

As it's not an expensive box and I'm a novice I don't think it needs repairs, but any comments gratefully received. I note that the plastic keyboard seems to be a closed box? Can I get access to the buttons to have a look? Thanks in advance for any advice - K
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Pokerwork incident
« Reply #1 on: June 29, 2009, 10:38:41 AM »

I took the grill off and saw that the high A read (I think - 3rd from bottom) on the D row was only just covering the whole. I guess when it fell, it moved a bit.

If you only took the grille off what you saw was not the reed but the pallet which you can just bend a bit to cover the hole properly

Quote
I note that the plastic keyboard seems to be a closed box? Can I get access to the buttons to have a look? Thanks in advance for any advice - K

To get behind the keys, pull the four pins holding the treble end to the bellows and inside you will see two screws that secure the plastic keyboard cover.

Scallyanglo

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 106
  • Baffetti/Oakwood Binci Pariselle 2.6 LM 14 bass
Re: Pokerwork incident
« Reply #2 on: June 29, 2009, 01:22:36 PM »

If you only took the grille off what you saw was not the reed but the pallet which you can just bend a bit to cover the hole properly
Ahh - yes I wondered whether this would be OK.
To get behind the keys, pull the four pins holding the treble end to the bellows and inside you will see two screws that secure the plastic keyboard cover.
Interesting! I'm almost glad I dropped it now. I wouldn't be looking inside otherwise  ;)
Lester, many thanks
Logged

Skipy

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 171
Re: Pokerwork incident
« Reply #3 on: June 29, 2009, 04:44:49 PM »


It gave a long wail as I let air in. After some deep breathing - both me & the box - this stopped, and it doesn't do it now.

I like that  ;D


Interesting! I'm almost glad I dropped it now. I wouldn't be looking inside otherwise.

And that  ::)
Logged
Saltarelle Solstice 12 B/C/C#, Hohner Trichord III B/C/C#. 

I can't imagine life without my melodeons!
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal