Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: 3d printing  (Read 3617 times)

0 Members and 1 Guest are viewing this topic.

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
3d printing
« on: October 24, 2016, 02:46:38 PM »

Just curious. Has anyone used 3d printing to make parts? e.g. reed blocks?  Or is there already a thread about this? Seems to me that printing a complex structure like a reed block would be perfect for 3d printing...or perhaps not. Discuss.

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: 3d printing
« Reply #1 on: October 24, 2016, 03:29:44 PM »

There were suggestions a while back that a 3D reedblocks may not prove very strong as they are built up in layers and are better in compression than sheer.  The other big question is whether wax will stick to the material.  Of course, if you have suitable (low cost) access to experiment, then we would all benefit from a proof of concept!

Rob.
Logged

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: 3d printing
« Reply #2 on: October 24, 2016, 03:34:34 PM »

There are a few hurdles. I need to learn to use an appropriate CAD tool. (:). I'm pretty sure that if you can print a gun you can print a reed block. The newer Hohner Students have plastic reed blocks. And if necessary you could have a wooden foot to transfer the sound, maybe..... If I ever get around to doing more than thinking about it I'll keep you posted.

triskel

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3290
Re: 3d printing
« Reply #3 on: October 24, 2016, 05:05:13 PM »

Just curious. Has anyone used 3d printing to make parts? e.g. reed blocks?

You'd be better to use a laser cutter - it'll produce reed blocks much faster, and in wood. Here's Diatonix giving a demonstration:

Diatonic accordion construction: Making a single-row melodeon reed block

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: 3d printing
« Reply #4 on: October 24, 2016, 07:07:02 PM »

Ah yes, I think I've seen that before....yes, it's the way to go.

diatonix

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 622
Re: 3d printing
« Reply #5 on: October 24, 2016, 08:18:54 PM »

I still make all my other reed blocks the traditional way (with a precision circular table saw).
Logged

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: 3d printing
« Reply #6 on: October 24, 2016, 08:45:45 PM »

And what saw do you have? I'm casting about for a better one that I've got at the moment.

diatonix

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 622
Re: 3d printing
« Reply #7 on: October 24, 2016, 08:59:35 PM »

Logged

deltasalmon

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1002
Re: 3d printing
« Reply #8 on: October 24, 2016, 09:54:15 PM »

http://melodeonmusic.com/2014/05/20/joy-making/

Owen from melnet posted an article about building one. Never saw if he finished or not.

Posted from Android.
Logged
Sean McGinnis
Bordentown City, NJ, USA

Grape Ape

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1209
Re: 3d printing
« Reply #9 on: October 24, 2016, 11:52:24 PM »



You'd be better to use a laser cutter - it'll produce reed blocks much faster, and in wood. Here's Diatonix giving a demonstration:

Diatonic accordion construction: Making a single-row melodeon reed block
[/quote]

Now that video is just plain cool.
Logged

Garry Probert

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 296
Re: 3d printing
« Reply #10 on: October 25, 2016, 08:53:29 PM »

Hi i have also looking into 3D printing reed blocks ,i have a friend works for a design company that has an industrial modeling printer ,trying to get use on the down time,i will update when i know, looks fun 
Logged

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: 3d printing
« Reply #11 on: October 29, 2016, 04:58:31 PM »

Warpage will be your biggest enemy,the other problem will be printing the top of the reedblocks. When the top plate of the reedblock cell is being printed it is a unsupported overhang and printers have a real problem with this as you are trying to print on air.

A solution that would solve a couple of problems would be to laser cut a bottom plate out of hardwood and print right onto it or glue on to it later. Leaving the top plate of the reedblock unprinted glue another strip of wood to the top of the printed comb to give stiffness and avoid the overhang problem (my fave).

You might be able to print the top of the comb upside down without a bass plate to avoid the overhang, and glue on the bass plate too.
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: 3d printing
« Reply #12 on: October 29, 2016, 05:40:37 PM »

You might as well just build the whole thing from wood.  It's not a difficult price cross with the right jigs.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: 3d printing
« Reply #13 on: October 29, 2016, 06:17:35 PM »

You might as well just build the whole thing from wood.  It's not a difficult price cross with the right jigs.

Oh, that pesky predictive text....  >:E
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Psuggmog Volbenz

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 318
    • musical whimsy
Re: 3d printing
« Reply #14 on: October 29, 2016, 09:27:57 PM »

Warpage will be your biggest enemy,the other problem will be printing the top of the reedblocks. When the top plate of the reedblock cell is being printed it is a unsupported overhang and printers have a real problem with this as you are trying to print on air

I got to play around with first generation 3 d printers back when they were known as rapid prototype machines. There were only a few in the states at the time and they cost tens of thousands of dollars then. These machines had two heads which deposited the either plastic or bronze power(only one type of material per machine)and a filler material which mechanically supported the parent material and fiilled the areas which would be open spaces when the object was finished. The printed object was then heated in an oven to the fusing temperature of the parent material.  No sagging of any portion at the time of printing.  A computered controlled milling machine or router would be another hands off way to make reedblocks, but unless ones wishes to become a high output factory, why not use simple wood working tools to make reedblocks?
Logged
I'm squeezin' and they're wheezin': old junker boxes

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: 3d printing
« Reply #15 on: October 31, 2016, 07:12:25 AM »

Warpage will be your biggest enemy,the other problem will be printing the top of the reedblocks. When the top plate of the reedblock cell is being printed it is a unsupported overhang and printers have a real problem with this as you are trying to print on air.

A solution that would solve a couple of problems would be to laser cut a bottom plate out of hardwood and print right onto it or glue on to it later. Leaving the top plate of the reedblock unprinted glue another strip of wood to the top of the printed comb to give stiffness and avoid the overhang problem (my fave).

You might be able to print the top of the comb upside down without a bass plate to avoid the overhang, and glue on the bass plate too.

I have no experience with 3D printing and assume they have limitations like this, and that you'd have to work around the limitations. I assume also it depends where 'up' and 'down' is, when printing, and that different issues emerge. Making several parts and clipping them together might work. Once however you are into composite parts, wooden foot, etc then a CNC printer or (cheaper) a set of jigs and tools will do the job, as Theo says. But a reed block (for instance) is a sort of manifold and I thought this ought to be easy for a printer to produce. Or keyboard parts, like lever elbows, or pallets.. Allegedly you can print a working firearm so parts for a melodeon ought to be child's play... ( I thought). Maybe 3D printers aren't what they are cracked up to be.

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: 3d printing
« Reply #16 on: October 31, 2016, 08:37:07 AM »

Maybe 3D printers aren't what they are cracked up to be.

In my opinion the old name of Rapid Prototyping is much better and gives a clearer idea of what most 3D printers are capable of.  I think they can also be superb at producing patterns for lost wax casting of small intricate parts and a few other specialised products.  The name 3D printing conjures up ideas of some sort of universal manufacturing plant.  In reality its a tool and like all tools it has its own set of very useful applications, but it's a long long way of being able to make everything.
« Last Edit: October 31, 2016, 08:48:49 AM by Theo »
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Psuggmog Volbenz

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 318
    • musical whimsy
Re: 3d printing
« Reply #17 on: November 01, 2016, 05:13:57 AM »

One of the intriging aspects of the early RP. Machines was tthe ability to make parts with undercuts in the form which couldn't be made with sand casting methods and would be time consuming when investment cast, or machined. Desgn generations are now shorter and faster. I could  imagine developing a reedblock design using a 3d printer and when a satisfactory design was reached, make a die and injection mold the production version.
Logged
I'm squeezin' and they're wheezin': old junker boxes
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal