Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: question about reeds  (Read 3504 times)

0 Members and 1 Guest are viewing this topic.

Garry Probert

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 296
question about reeds
« on: October 30, 2016, 11:33:33 PM »

Hi i,m fine tuning some vintage zinc reeds ,i've always tuned my concertinas and on occasion used watch springs,feeler gauges,banding wire etc basically sprung steel for new tongues,there are various reed qualities listed on the forum dural hand made .......

is the difference in cost because of tolerances,build quality different tempering ,the reed plates ,final tuning ....its all carbon steel ,what makes the difference between standard and swanky
thanks
Logged

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: question about reeds
« Reply #1 on: October 31, 2016, 04:57:36 AM »

A couple of things.

The super simple explanation.

For "hand made" reeds the steel is cut along the length of the spring steel that is used for the reeds, this is more complicated and requires more labor, the benefit is that the "grain" of the steel runs the length of the reed.

Hand finishing which can be done to any reed is the process of grinding ,filing or sanding the upper surface of the reed so it has a curve much like the topside curve on a airplane wing.

I have seen handmade reeds without hand finished surfaces.
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997

Garry Probert

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 296
Re: question about reeds
« Reply #2 on: October 31, 2016, 08:27:57 AM »

Hi little surprised, i was labouring under the misapprehension that the stock was drawn (grain length) as a strip then the blanks pressed,not unlike hacksaw blades, having never seen a top quality reed i wondered if the swanky reed shoes were possibly tapered like concertina reed shoes     
and was assuming that tongue/plate tolerances and tapering were the primary reason ,being so labour intensive.
   
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: question about reeds
« Reply #3 on: October 31, 2016, 08:34:17 AM »

     
and was assuming that tongue/plate tolerances and tapering were the primary reason ,being so labour intensive.
 

They should also be better on hand made reeds.   Like concertina reeds there is variation in quality in each type depending on how well the particular process was performed.  Hand made can be superb and occasionally can be rubbish.  Some machine made reeds are delightful to play.  As witrh concertinas it's always best to judge an individual set of reeds on how well it plays.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Garry Probert

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 296
Re: question about reeds
« Reply #4 on: October 31, 2016, 08:59:24 AM »

Hi theo think i,m driving the cat crazy attempting to get the reeds to speak instantly lol i have two matched (as close as i can) c reeds that i was experimenting with trying to determine if removing mass from the 16mm to 14.5mm makes an appreciable difference to the volume timbre ....side by side ,if there is a discernable difference i can't hear it, perhaps i should ask the cat lol
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: question about reeds
« Reply #5 on: October 31, 2016, 09:05:31 AM »

trying to determine if removing mass from the 16mm to 14.5mm makes an appreciable difference to the volume timbre

It will make a significant difference to pitch.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Garry Probert

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 296
Re: question about reeds
« Reply #6 on: October 31, 2016, 09:51:57 AM »

Hi theo yes sorry ,pitch change decending i,m on my second set d/g learned this the hard way trim before rough tune lol
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: question about reeds
« Reply #7 on: October 31, 2016, 10:37:54 AM »

Are you shortening the reed tongues?
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Garry Probert

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 296
Re: question about reeds
« Reply #8 on: October 31, 2016, 12:00:01 PM »

Hi theo no, just playing around with old accordion reeds, i bought a job lot of wood concertina parts and some tools and this huge italian accordion was literally thrown in lol well beyond repair ,but tons of reeds , i've removed all the lilliput reeds ,cut down the old accordion reed shoes to 14.5mm tuned the close ones thinned the bigger jumps, new bass and chords reeds i quite liked the single voice c/f i had done but being the tinkerer i am wondered how she would sound as a baritone

I have played a baritone concertina and watched a video of Hohner elysium bass Melodeon so i've tuned a set of d/g reeds dropped an octave and am playing the frankenstein at the moment,interesting sound  i will post a sound file if its possible , before doing anything thats not reversible or buying quality reeds i,m just getting a feel for the dynamics and mechanics ,and using the old accordion reeds i am getting a better understanding of the way they work   
Logged

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: question about reeds
« Reply #9 on: October 31, 2016, 05:45:32 PM »

A couple of things.

The super simple explanation.

For "hand made" reeds the steel is cut along the length of the spring steel that is used for the reeds, this is more complicated and requires more labor, the benefit is that the "grain" of the steel runs the length of the reed.

Hand finishing which can be done to any reed is the process of grinding ,filing or sanding the upper surface of the reed so it has a curve much like the topside curve on a airplane wing.

I have seen handmade reeds without hand finished surfaces.

Steel is essentially physically (not magnetically) isotropic (same properties in all directions) regardless of the "grain direction" that is always referred to when the "tipo a mano" vs. "a mano" discussion comes around -- if it wasn't you'd see a lot of stuff in engineering circles about this for other applications, and it just doesn't happen, at least not anywhere with a scientific basis (like the "oxygen-free copper cables" scam). If you want to use steel for transformer cores the grain direction matters, if you want to use if for free reeds it doesn't.

So I'm pretty sure that the real difference is in the quality of the work that goes into making and fitting and finishing the reeds, and that the narrow steel is used mainly because that's what the market expects to see in "hand-made" reeds that cost a fortune -- it is more expensive, but this and the mystique help to justify the price.

And before anyone comes back and says "xxx hand-made reeds are brilliant and they say this matters" -- they may say it, but do they have any proof? Many instrument makers (and people who buy them) believe things that not only don't have any basis in fact but have been proven to be wrong...
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: question about reeds
« Reply #10 on: October 31, 2016, 08:39:12 PM »

OK, I'm ging to stick my neck out and expect to be shot down...

Normal grade machina (machine made) reeds are literally made by jigs and punches which get them close enough for the final tuning to make them (potentially) good enough for yer average player.  You'll often see them referred to as "Dural" as that is the materials used for the shoe.  They can indeed be excellent.

Tipo a Mana (hand made type) are basically machine made, but are offered by some reed makers with a choice of the shoe material.  Each reed is then finished by hand to achieve a very close likeness to a hand made reed.  A craftsman adjusts the gap, shapes the profile and sets the reed height and tunes it (out of the box).  It will only need final tuning once mounted in the box.

A Mano (hand made) are made entirely by hand.  As Theo said, some are brilliant and some have been known to be dubious.  I believe this depends on what the manufacturer is trying to achieve and that may not suit every player.  They should be the most responsive and have the widest dynamic range, but in achieving this some are noted to be less stable in the long term than Tipo a Mana.  It is said that for this reason Castagnari no longer offer them.

I have had boxes with machina reeds which did everything you could hope from them and one box with Tipo a Mana which was wonderfully stable and had a far better dynamic range than any other I've played.

Rob.

Logged

911377brian

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1518
Re: question about reeds
« Reply #11 on: October 31, 2016, 09:14:13 PM »

I've just purchased a box with Dix reeds. What makes them special or different from other reeds? It's an old box and I haven't taken delivery yet so can't make comparisons with other boxes in the house....
Logged

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: question about reeds
« Reply #12 on: October 31, 2016, 09:55:35 PM »

Quote
I've just purchased a box with Dix reeds. What makes them special or different from other reeds? It's an old box and I haven't taken delivery yet so can't make comparisons with other boxes in the house....

This thread may be helpful:
http://forum.melodeon.net/index.php/topic,14469.msg178512.html#msg178512
Logged

Garry Probert

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 296
Re: question about reeds
« Reply #13 on: October 31, 2016, 10:23:47 PM »

Hi guys some interesting responses,it does seem the more expensive reeds seem to be associated with the better quality boxes and my friends Castagnari Lilly is super responsive but i don't know how much is down to the reeds or the super airtight quality construction

After what felt like hours with my tongue out looking for air leaks , new pallet leather and felt and hide glue every possible air leak the liliput bass section is now really responsive and has a bark, but is it limited by the quality of the reeds quality of materials construction of the case, i have found the easier something is to play the better one thinks it sounds 
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: question about reeds
« Reply #14 on: November 01, 2016, 12:17:30 PM »

... is it limited by the quality of the reeds quality of materials construction of the case, i have found the easier something is to play the better one thinks it sounds

Is it still hard to play?   The original Hohner reeds in Liliputs are usually very nice to play. 
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

911377brian

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1518
Re: question about reeds
« Reply #15 on: November 01, 2016, 01:33:43 PM »

Tripods, thanks for the link...
Logged

911377brian

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1518
Re: question about reeds
« Reply #16 on: November 01, 2016, 01:36:08 PM »

Bloody spell check! The above thank you was addressed to Tirpous.( Not Tripod) :|bl
Logged

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: question about reeds
« Reply #17 on: November 01, 2016, 01:43:51 PM »

More links:

Comparison chart on the Voci Armoniche site:
http://www.vociarmoniche.it/tabella.php?p=6

I saw no comparison chart on the Harmonikas site but you get fairly detailed specs by clicking on each reed type on the left:
http://www.harmonikas.cz/en/export-dural-iii-class#obsah

Tripod  ;)
Logged

Garry Probert

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 296
Re: question about reeds
« Reply #18 on: November 01, 2016, 02:05:53 PM »

Hi theo no my lilliput is a joy to play didnt even change the bellows gasket the folds are so tightly spaced it doesn't seem to have ever been played all reeds speak quickly ,its great .......the project one now has new pallet pads treble and bass and i found a little air leaks from a strap screw and a couple of slack springs all fine now ,my experimentation with the octave drop single voice darren loved it ,but as shes now mine i,ve put that aside retaining the d/g bass side and have started on a d/g 2 voice treble ,still debating ,thin brass plate or birch ply to level the sound board ,using hide glue to fill the bow   

my reference to "easy to play" was i cant count the times a fine setup on an instrument has been followed by "it sounds so much better" with melodeons its probably true as the reeds are all important

but a reset neck and fret dress doesent realistically change the sound ,but the ease of play seems to illicit this perception ,darrens has an old hohner corso sounded great the castagnari lilly was also very nice ,but miraculously became slightly better when he said how much it cost, i of course consider myself above this fickle feckless mentality "Possibly" lol   
Logged

Garry Probert

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 296
Re: question about reeds
« Reply #19 on: November 01, 2016, 02:44:39 PM »

Hi many thanks just watched the reed making video wonderful,being a great fan of traditional skills and the handmade by man approach...........but ...........if we are looking for the closest tolerances ,no worn tooling inaccuracies surely a water jet would be perfect i started out as an engineering apprentice Jetmec bexleyheath (hi if anyone may have worked there) and all of the milling machines ,press etc were not exactly cutting edge technology 30 odd years ago 

 https://www.youtube.com/watch?v=PCsoC3i7JYc   

you could perfectly cut the shoes ,cut thickness reeds just rivet and fine tune ?if anyones interested in this my friend could do the cad drawing, if several people wanted a set of say d/g it might be fun,several years ago i considered making duet reeds but it was the cost of tooling that put me off the actual materials are cheap

what do you think? 
Logged
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal