Layout is a D/D# version of the Bouchard system as discussed here:_
http://forum.melodeon.net/index.php/topic,192.0.htmlThis one is aimed at playing in D & G rather than chromaticism, with just a
G#/Bb accidental on the kneemost button. The four buttons on the inner row
operate just two pallets, but give the press and draw notes where you expect
to find them. Play one of those buttons the wrong way and you get a
surprise. No prob so long as you stay within the intended keys.
I'm not good at designing things on paper and tend to need to see them in
three dimensions, so the starting point was just some rough dimensions and a
sketch of the action layout then everything else developed as I went along,
with consequent blind alleys and wrong turns to be sorted out!
Design, dare I say it, inspired by Olav Bergflodt's boxes, but a look at his
site will show how far I've fallen short!
http://www.bergflodt.net/Grille design inspired by an image of a Sutton Hoo find.
Mahogany is from recycled kitchen cabinet doors. Birch ply, card and paper
for bellows, brass rod, basswood, wire for springs etc etc all from general
sources.
Reeds a hotchpotch, particularly on the bass side, but mainly Cagnoni with
some solder weighting where big pitch shifts were needed. That's mainly on
recycled reeds.
Buttons, bellows corners and diamonds, valves, strap brackets, and pallet
felt all from Charlie at CGM. I was able to get two leather corner diamonds
from each one of the size Charlie supplies.
Single reeds mounted flat on removable boards. (Ply backed basswood.) Since
I wasn't sure how the whole thing would turn out, I took a short cut here.
There's space for double reeds either flat or on a reed block at the treble
end, when and if I care to rework it.
I enjoy waxing reeds, (haven't done too much of it yet, I guess!) but I
don't like the messy stickiness when you change things later so the reeds
are all screwed.
Bass end very experimental with directly lifted pallets as you can see.
It's two note "chords" on every button to imply Em/Bm D/A G/G A/C. There's a
mix of fifths and thirds dictated more by reed convenience than musical
considerations, but this does mean some button mixes are there to be
explored. Air button location is not good at present.
Some of the recycled Hohner reeds at the bass end are a bit too raspy for
the Cagnoni treble reeds.
As always with such projects, it was a lot more work than I expected!
The metal reed corners I got were much too wide across the U channel so some
improvised press-work was needed to narrow them, (yet keep the right angle
bend...) I would have liked the bellows to be much neater, but I guess
they're not too terrible for a first attempt on a very steep learning curve.
Hand folded cardboard etc. The bellows probably took twice as long as they
should have done. Another set would be much quicker, but even with this
number of folds there is an awful lot of repetition involved!