Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2]   Go Down

Author Topic: Yet another 1 1/2 row - My first build from scratch  (Read 12576 times)

0 Members and 1 Guest are viewing this topic.

TomB-R

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 598
Re: Yet another 1 1/2 row - My first build from scratch
« Reply #20 on: July 06, 2009, 01:15:42 PM »

RE the bellows Tom the design over at cnet is very good, and one that I've used very succesfully, and next time round am going to use the tedrow method on my next set off bellows for accordion.
Great Job all round - looks fantastic!
AL

(Setting my own thread adrift here!) Do you skive the leather yourself Al, and if so by what method, or do you use "bellows ready" material?
Cheers
Tom
Logged

HallelujahAl

  • Guest
Re: Yet another 1 1/2 row - My first build from scratch
« Reply #21 on: July 06, 2009, 01:39:49 PM »

Quote
(Setting my own thread adrift here!) Do you skive the leather yourself Al, and if so by what method, or do you use "bellows ready" material?
Cheers
Tom
I purchase most of my leather ready skived from the leather company that I deal with. I don't buy ready-skived gussets, but instead cut my own gussets out and skive them myself as it's just cheaper that way. Most of my skiving is done by hand using an english paring knife blade upon a marble block. I machine-skive some parts of the leather, but at the moment am on the lookout for another schaftfix. Of course, really thin topbind material doesn't need skiving at all ;D
AL
Logged

TomB-R

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 598
Re: Yet another 1 1/2 row - My first build from scratch
« Reply #22 on: July 17, 2009, 09:38:45 AM »

I was asked to give a bit more building info on another forum. Since I wrote this and it's my copyright I'll post it here too though it repeats some of what I've already said.


"The first part of the building sequence was to build the mahogany sides around the birch ply end plates. Just a matter of making flat boxes. The bellows frames were then made to fit the ends and that gave the size reference for the bellows.

To make the bellows I folded grey board on a wooden jig, crunching the folds good and tight with G clamps. Each folded piece gave a side and an end. The angled corners were cut on the bandsaw with the folded “block” of card clamped tight.
It was then a matter of temporarily holding the corners together whilst fitting the leather corner diamonds. I used paper, which wasn’t up to the job. I recall reading somewhere about silk being used. The quantity would be pretty small. Pic attached of this stage.

Once I’d fitted the corner diamonds I could then cut and glue the bellows papers into the “valleys,” then I fitted the metal corners and then glued the bellows tape to the “peaks.” All that’s then glued to the bellows frames. There’s a lot of repetition though, and it all took a long time! The metal corners I got were much too wide across the U channel so some improvised press-work was needed to narrow them, (yet keep the right-angle bend...)

Once the bellows were done the action boxes for each end could then be built up on the ends. The bellows building was the most unfamiliar part of the build, but I was confident about everything else and so wanted to get the bellows done early in the project before putting a lot of time and effort into the rest."

I made three "jigs." 
The first was just a box to hold the folded card in the right place while the corners were first attached.
The second is hard to describe, (pic prob needed) but it held and supported one corner open at the correct angle from the inside while the corner diamond was fixed.
The third was just a couple of pieces of zig-zag, (or toothed) wood to hold the bellows folds open while the papers and tape were glued.


I was going to write a "rant-ette" here, but it might have been a bit grumpy, so I'll tell a story that apparently Paul Heiney tells against himself.

Paul Heiney as well as being a TV person is, or has been, very interested in heavy horses and farming with horses.
He'd been talking to an old boy who had a lifetime of farm experience, with and without horses. After they'd been talking for a while, the old boy said, "yes, farming with horses, it's grand, but...... you've got to get on with it!"  

Cheers all
Tom


« Last Edit: July 17, 2009, 10:17:53 AM by TomB-R »
Logged

Stiamh

  • Old grey C#/D pest
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3611
    • Packie Manus Byrne
Re: Yet another 1 1/2 row - My first build from scratch
« Reply #23 on: July 27, 2009, 08:02:01 PM »

Late to the party but... nice-looking job Tom, well done!

Are you going to make more?

If you haven't fitted bellows straps or a lock just yet, you might be interested to know that (at least in 2007) Bernard Loffet was not fitting straps or a lock to the bellows of his Graet e Breizh models. He assured me confidently that they were quite unnecessary, and that modern makers of CBAs are eschewing them also. I wasn't entirely convinced... and he did tell me he would put them on if the customer wanted.

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Yet another 1 1/2 row - My first build from scratch
« Reply #24 on: July 27, 2009, 11:23:47 PM »

I've just made a melodeon based on the Hohner 114 and I can't bear the thought of putting bellows straps on it. I think it would spoil the appearance, which is why I've been yakking on about an internal bellows latch in another thread.



Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

melodeon

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1732
Re: Yet another 1 1/2 row - My first build from scratch
« Reply #25 on: July 28, 2009, 02:35:41 AM »

Great looking box   However

needs to be BLACK


luv dem bellow
Logged

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Yet another 1 1/2 row - My first build from scratch
« Reply #26 on: July 28, 2009, 08:44:45 AM »



needs to be BLACK


Hmmm, aerosol or blowlamp?
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Yet another 1 1/2 row - My first build from scratch
« Reply #27 on: July 28, 2009, 09:03:08 AM »

I've just made a melodeon based on the Hohner 114 and I can't bear the thought of putting bellows straps on it. I think it would spoil the appearance, which is why I've been yakking on about an internal bellows latch in another thread.
Recently I've been using a 1-inch wide strip of double-sided velcro (i.e. it sticks to itself)* to hold a concertina with bellows fully closed in an otherwise slightly oversized case.

The velcro strip goes all the way round the instrument with a couple of inches overlap. Putting it on and taking it off is quick and easy, and I guess easier than fitting a bellows latch. Also, it's easy to keep track of when not in use. Just wrap it round your leg.  ;)

The only downside is the chhhweeep! noise when you pull it undone.   :o

*Some of you may recognise this stuff - it's the same as I was flogging at Witney to wrap around melodeon strap buckles.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Yet another 1 1/2 row - My first build from scratch
« Reply #28 on: July 28, 2009, 09:03:28 AM »


aerosol


No need to be like that he was only making a suggestion   ::)

HallelujahAl

  • Guest
Re: Yet another 1 1/2 row - My first build from scratch
« Reply #29 on: July 28, 2009, 09:10:27 AM »

Quote
aerosol



No need to be like that he was only making a suggestion

Lol!
Good 'un Lester
Logged

Bananayogi

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 147
Re: Yet another 1 1/2 row - My first build from scratch
« Reply #30 on: July 28, 2009, 09:16:34 AM »


aerosol


No need to be like that he was only making a suggestion   ::)

 ;D
Logged
Larry Miller Bon Cajun in C, A/D/G Handry, far too many Hohners and a Streb.

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Yet another 1 1/2 row - My first build from scratch
« Reply #31 on: July 28, 2009, 09:59:24 AM »



The only downside is the chhhweeep! noise when you pull it undone.   :o



Factoid: the Italian word for Velcro is "screesh"
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

TomB-R

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 598
Re: Yet another 1 1/2 row - My first build from scratch
« Reply #32 on: November 20, 2011, 02:49:40 PM »

In response to a couple of questions from Telemorris

Type of glue for bellows in general and corners in particular.
- I used a general purpose PVA, woodworking etc, not one sold primarily for paper.  The one I used is called "Polyten"  I got it because it was visible on the bench in bellows-making photos on a commercial makers website!

Bellows making jig
- Photo attached of my bellows making "jig."  This holds the each corner open at an appropriate angle.  The angle at the bottom of the "valley" is 90 degrees. Quite easy to make using either a mitrebox or  tilted saw table. It's clamped to the bench sticking out far enough to be used on each corner in turn.
NB, some wood has been removed in the middle of the corner to give space to the crumpled part of the leather corner diamond.
The other important tool was a Y made of wire. The vertical being the wire folded and twisted, then the two arms, about 2" each at right angles to each other.  This held the bellows corner leather into the bottom of the valley whilst the leather was pressed against the cardboard. 

I was happy with the result of my bellows but they haven't had heavy use. I don't know how the grey board would stand up over time.  I thought of varnishing the inside for extra strength, but decided not to bother until I know whether they worked overall.
 
Logged
Pages: 1 [2]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal