Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Reed set/gap - toy melodeon  (Read 1794 times)

0 Members and 1 Guest are viewing this topic.

Phil Howard

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 135
    • Red Cuthbert Morris
Reed set/gap - toy melodeon
« on: November 05, 2016, 08:00:22 AM »

I've bought a child's melodeon to give to my nephew at Christmas, and unsurprisingly on arrival it's a bit rubbish and wants some tidying to make it usable.

The bass end reed plates that fell off in transit are obvious as to which hole they go with and which way 'round they go, but the treble end is very quiet and breathy. A bit of reading around (or reeeding around? ;) ) online suggests this is not uncommon for these toys, and can probably be cured by altering the set of the reeds (that's way too open), possibly changing some of the valves, and wouldn't suffer for just taping off one of the voices.

So what I haven't found is if there's a gap (or gap range) that anyone would recommend (expressed in thou' if possible, my feeler gauges are imperial), or is this a "more art than science" question? And any top tips on achieving it for a non-specialist? Is if just a case of gently bending each one to achieve the right gap, presumably while giving it some support?

Thanks
Logged

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Reed set/gap - toy melodeon
« Reply #1 on: November 05, 2016, 08:23:46 AM »

So what I haven't found is if there's a gap (or gap range) that anyone would recommend (expressed in thou' if possible, my feeler gauges are imperial), or is this a "more art than science" question? And any top tips on achieving it for a non-specialist? Is if just a case of gently bending each one to achieve the right gap, presumably while giving it some support?

The reeds in toy melodeons are definitely not the highest quality which means that there can also be a significant gap around the sides of the reed tongue and the aluminium frame. You can't really do anything about this, but it is possible to adjust the gap at the tip. But before you do so, check that all the valves are seating properly and ideally should sit perfectly flat when in the rest position. Any obvious curled or creased valves should be replaced first.

A rule of thumb sometimes quoted is that the gap should be about the same width as the thickness of the reed tongue tip. But this is not always the case and it depends very much on the particular reed tongue and the general playing pressure of the instrument. In this sense setting the reed gap is indeed "more art than science".

If the reed tip is set too high, the sound is usually breathy, a bit on the loud side and the reed is slow to start. If the gap is too low, the sound can be weak, or non-existent, and the pitch can vary greatly with pressure. At higher pressures the reed may simply 'choke off' and cease to sound at all.

To adjust the reed set, use a cocktail stick to very gently ease the reed tongue up or down as needed. Go slowly and gently, little by little, and test the reed response each time. This is easiest done on a tuning bench but in the absence of that, use the instrument's own bellows gently held in place by hand whilst operating the keyboard button with the other hand. Each bending of the reed tongue will gradually change the permanent set of the reed tongue. You may not be able to see any difference but the playing test should tell you how effective your working is. The ideal target is to have all the reeds starting to sound at a minimal bellows pressure, yet not choking off at higher pressures.

A lot of trial and error needed, but with care you should be able to improve the response of even a toy melodeon. If nothing else, it will be a valuable learning experience.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Phil Howard

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 135
    • Red Cuthbert Morris
Re: Reed set/gap - toy melodeon
« Reply #2 on: November 05, 2016, 08:40:30 AM »

Thanks Steve, advice appreciated.

I'll have a crack and see how it goes. If I'm planning on taping off half the reeds, it means I've a fair margin for error so long as one of each pair functions :-)

This is the prelude to having a crack at making a decrepit one-row playable, so I certainly hope to learn something!
Logged

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Reed set/gap - toy melodeon
« Reply #3 on: November 05, 2016, 08:44:57 AM »

If I'm planning on taping off half the reeds, it means I've a fair margin for error so long as one of each pair functions :-)

My inclination would be to keep all the reeds untaped. You will lose the tremolo if you tape off one set as well as reducing the sound volume considerably. I think that the toy melodeon needs both sets of reeds sounding to be half-decent.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Reed set/gap - toy melodeon
« Reply #4 on: November 05, 2016, 08:55:33 AM »


So what I haven't found is if there's a gap (or gap range) that anyone would recommend (expressed in thou' if possible, my feeler gauges are imperial), or is this a "more art than science" question?

It's not possible to specify a measurement for the gap.  It's not art though, the criterion is not expressed in a gap but in reed performance.   There are so many variables that the only way is trial and error.  Lower grade reeds need bigger gaps, better grade smaller; lower pitch needs bigger gap, higher pitch smaller.

If the gap is too big then at low playing pressure you will hear air moving before the reed speaks.  If the gap is too low the reed will choke if played hard.  The difference between too high and too low can be too small to see.   New reeds of the cheaper sort are usually set too high, because its better not to have any reeds that choke.  So start off one reed at a time bending the reed slightly lower then test with low pressure and with hard playing, then keep repeating that till you get the best performance the reed can manage.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

911377brian

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1518
Re: Reed set/gap - toy melodeon
« Reply #5 on: November 05, 2016, 09:46:29 AM »

Not all the reeds on the Chanson type kids melodeons are rubbish. Lester tuned a bog standard off the shelf 'toy' from C to Bb and it sounds very good indeed. Don't ask for a demo, I haven't got a clue how to put one up on here....
Logged

Phil Howard

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 135
    • Red Cuthbert Morris
Re: Reed set/gap - toy melodeon
« Reply #6 on: November 05, 2016, 11:32:11 AM »

Well I've had a go - lower reeds now much better, but still some work to do on the higher ones. I'll do a bit more tomorrow, along with waxing the bass end reeds back onto their block.

If you can excuse the B-part's falling apart in both tunes (it was bound to happen once I hit "record"), I videoed putting it through its paces, because why not?

https://www.youtube.com/watch?v=ZiJnYkCMJwk
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Reed set/gap - toy melodeon
« Reply #7 on: November 05, 2016, 11:54:47 AM »

The easiest way to improve performance of these is to blank off one bank of reeds. Less air used so the little bellows are easier to manage.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: Reed set/gap - toy melodeon
« Reply #8 on: November 05, 2016, 12:43:41 PM »

Did that with one, made a noticeable difference to ease of use and not much difference to volume.
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal