Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: couple of questions ,reed chamber size and taper  (Read 2401 times)

0 Members and 1 Guest are viewing this topic.

Garry Probert

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 296
couple of questions ,reed chamber size and taper
« on: November 06, 2016, 09:54:40 PM »

Hi guys been trying to find some correlation between reed chamber size and reed length thickness etc ,i,ve measured the reed blocks and it  seems to be a compromise,the taper of the reed block follows the size of the reeds and it's obviously easier to construct the reed blocks ,opposed to staggering the length for each individual reed

on several posts matching the chamber to reed  appears to be critical measurement ,but a common modification is 4th button start ,so would one then increase the size of the chamber? on another post they talk about a italian melodeon that the reed blocks have a more acute reed chamber taper ,but is the aperture the same size ? and how does a more acute taper affect the sound ?

many thanks
Logged

Malcolm Clapp

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1119
  • Loving my Hohner-reeded wet MMM CastaTommy
Re: couple of questions ,reed chamber size and taper
« Reply #1 on: November 07, 2016, 04:37:54 AM »

My understanding of the angled chambers is that it is to prevent reeds/valves from fouling those on the adjacent block whilst retaining a smaller footprint and consequently a less wide (and lighter) instrument. The amount of angle is, of course, restricted so that the reeds/valves also do not catch on the bellows folds. To my ear, there is little or no effect on the sound.

On most melodeons, the aperture size (I assume you mean the hole in the bass of the block) is the same for all the reeds, though I have seen the occasional one with slightly smaller apertures for the very highest reeds, and is also found on some piano accordions.

Generally, the length of the reed chambers is minimalised to the length of the reed plus a couple of millimeters, which allows for the air (and valve) to travel comfortably.

The actual volume of the chamber tends to have little acoustic effect except for the very highest reeds, where an insert is usually fitted to reduce the chamber size.

Shifting reeds for a button 4 start will often (but not always) require a sliver of wood at the top of the chamber to be removed, just so that the reed in the new position will function. Similarly, converting a G/C melodeon to D/G will often require inserting a block at the top of the chamber to reduce its size so that the reed plate will fit.

There has been some discussion recently on another related website about whether or not reed chambers are actually "tuned". Personally, I believe that the chamber dimensions are only to accommodate the product of the reed-maker and that "tuned chambers" is just an old wife's tale at worst, and an advertising gimmick at best, but the theory does have its adherents, plus some imho fairly dodgy science to back it up; but the jury is still out as far as I can see.

My own take on melodeon construction is that most manufacturers get it right most of the time, subject to cost. While there is always room for new ideas and improvements in any endeavor, reinventing the wheel is often a step too far in retaining the nature of the beast.  Just one man's views; counter arguments welcome!
« Last Edit: November 07, 2016, 04:43:31 AM by Malcolm Clapp »
Logged
Tuner/repairer, now retired.

TomBom

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 471
Re: couple of questions ,reed chamber size and taper
« Reply #2 on: November 07, 2016, 07:53:10 AM »

[Pedant mode]
sorry garry but I think your posts would be much easier to read if you'd end sentences with a full stop and start with a capital letter ,it doesnt help much just using commas does it?
[/Pedant mode]
Logged

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: couple of questions ,reed chamber size and taper
« Reply #3 on: November 07, 2016, 10:15:45 AM »

 A very good answer by Malcolm Clapp, I couldn't have put it better myself.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: couple of questions ,reed chamber size and taper
« Reply #4 on: November 07, 2016, 10:27:04 AM »

Yes I agree, good summary Malcolm.
I would add one further practical point.  Bass reeds need a certain amount of air volume in the reed chamber if they are to start easily. If bass reed chambers are too small then bess reeds don't perform well. I don't understand the physics.

And on a theoretical point, talk of "tuned reed chambers" is baloney.  "Tuned chambers"  implies a resonance effect.  In accordions resonance in part of the instrument is usually a bad thing.   Resonance in reedblocks or nearby parts takes energy away from the sound production of the reed.   The way this usually manifests is when the tremolo on one note in a two voice instrument works perfectly when the reed block is outside the instrument, but the note sounds weak and the tremolo disappears  when the note is played with the block inside the instrument.  This is usually a resonance in some of the structure of the block, rather than the air in the reed chamber.   It can usually be cured very simply by changing the natural frequency of the blocks.  The usual way of doing this is by placing a metal strap over the reed blocks to form a mechanical link between the blocks.  Most makers of good quality boxes do this at the factory.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: couple of questions ,reed chamber size and taper
« Reply #5 on: November 07, 2016, 10:32:57 AM »

I agree just about 99.9% with what Malcolm, Rees and Theo have said.

I'll just add one comment: a few years ago I was able to assess a 'before and after' sound of a Castagnari Hascy which had been converted from 3rd button start to 4th button start. After conversion (which involved shifting the reed plates floor-wards by one chamber) the sound was very subtly different - a barely noticeable, brighter, slightly more edgy sound compared with how it was previously. Whether this was due to the reduced size of the chamber for the given pitch of the reeds, I could not say. But it's possible.

The instrument in question was tuned with a typical Castagnari light swing slow tremolo. If the tremolo had been even a smidgeon damper, I don't think it would have been possible to tell any difference.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: couple of questions ,reed chamber size and taper
« Reply #6 on: November 07, 2016, 10:38:39 AM »

Hmmm "a smidgeon damper". I might have to feature one of those in Tool of the Month  ;)
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: couple of questions ,reed chamber size and taper
« Reply #7 on: November 07, 2016, 10:48:05 AM »

Hmmm "a smidgeon damper". I might have to feature one of those in Tool of the Month  ;)
You might find it useful for the wood-burning stove in your workshop. Fits in any flue...
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Garry Probert

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 296
Re: couple of questions ,reed chamber size and taper
« Reply #8 on: November 07, 2016, 12:03:27 PM »

Hi guy many thanks,excellent info
Quote
angled chambers is that it is to prevent reeds/valves from fouling those on the adjacent block whilst retaining a smaller footprint and consequently a less wide (and lighter) instrument. The amount of angle is, of course, restricted so that the reeds/valves also do not catch on the bellows folds. To my ear, there is little or no effect on the sound
i had rather stupidly incorporated the taper into flat mounted single reed blocks ,i had assumed it somehow helped  the reeds to speak quicker "sorted"
Quote
"Tuned chambers"  implies a resonance effect.  In accordions resonance in part of the instrument is usually a bad thing.   Resonance in reedblocks or nearby parts takes energy away from the sound production of the reed.   The way this usually manifests is when the tremolo on one note in a two voice instrument works perfectly when the reed block is outside the instrument, but the note sounds weak and the tremolo disappears  when the note is played with the block inside the instrument
great ****that answers  several questions

The lilliput d/g two voice conversion i,m not really happy with ...its probably more the style of chord based fingering i,m using than the box as i,m sort of adapting duet concertina three finger pad shapes ,darrens teaching me to sort of play off the gleichen so i,m pretty much mid treble buttons and its a bit shrill
i,m now making yet another reed block lol as darren suggested it maybe the smaller thinner reeds on the lilliput as playing the same patterns in the same position on his melodeon has more ,depth?richer tone ....some will obviously be the housing ,but what i think i,m trying to get is a thick concertina treble with a liliput bass,

i,m absolutely delighted with the bass side on the project liliput so i,m halfway done lol many thanks for all the excellent advice ,i really love the small compact lilliputs wonderful little instruments but i must say the club II has an awesome sound ,but it's far too heavy for me to play comfortably
standing   
       
 
Logged

Graham W

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 277
Re: couple of questions ,reed chamber size and taper
« Reply #9 on: November 07, 2016, 12:31:17 PM »


Whether this was due to the reduced size of the chamber for the given pitch of the reeds, I could not say. But it's possible.


French tuners certainly regard that chamber length and volume is an important factor in getting the optimum sound and response from a reed.
Sometimes described as 'Calage des chambres des sommiers'.  There is quite a lot online that is interesting to read, but virtually all in French.
This article for example includes some charts giving an indication of the effects of different chamber sizes. http://www.accarnoldw.com/s1_420_1_guide_pag_impair.pdf
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: couple of questions ,reed chamber size and taper
« Reply #10 on: November 07, 2016, 12:43:12 PM »

Interesting article.  BUT it makes the mistake of talking about a casotto chamber in terms of resonance "Boîte de
résonance"  which is a misunderstanding of the function of a casotto  chamber.  Its main purpose is to absorb some of the higher frequencies to produce a warmer more rounded sound.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: couple of questions ,reed chamber size and taper
« Reply #11 on: November 07, 2016, 06:00:23 PM »

Yes I agree, good summary Malcolm.
I would add one further practical point.  Bass reeds need a certain amount of air volume in the reed chamber if they are to start easily. If bass reed chambers are too small then bess reeds don't perform well. I don't understand the physics.

And on a theoretical point, talk of "tuned reed chambers" is baloney.  "Tuned chambers"  implies a resonance effect.  In accordions resonance in part of the instrument is usually a bad thing.   Resonance in reedblocks or nearby parts takes energy away from the sound production of the reed.   The way this usually manifests is when the tremolo on one note in a two voice instrument works perfectly when the reed block is outside the instrument, but the note sounds weak and the tremolo disappears  when the note is played with the block inside the instrument.  This is usually a resonance in some of the structure of the block, rather than the air in the reed chamber.   It can usually be cured very simply by changing the natural frequency of the blocks.  The usual way of doing this is by placing a metal strap over the reed blocks to form a mechanical link between the blocks.  Most makers of good quality boxes do this at the factory.

To explain Theo's statement about bass reeds, the physics is that bass reeds are more flexible (and weighted) and bigger area than higher-pitched ones (to keep the size reasonable), so when the air pressure in the chamber suddenly changes when the pallet opens they have much more tendency to sink down in the frame and "choke", leading to either slow starting or even worse that horrible "bleurghh" sound. A bigger reed chamber slows the rate at which pressure build up and reduces the tendency to do this.

I agree with everything he said about "resonance" :-)
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

Garry Probert

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 296
Re: couple of questions ,reed chamber size and taper
« Reply #12 on: November 08, 2016, 12:20:32 AM »

Quote
so when the air pressure in the chamber suddenly changes when the pallet opens they have much more tendency to sink down in the frame and "choke", leading to either slow starting or even worse that horrible "bleurghh" sound. A bigger reed chamber slows the rate at which pressure build up and reduces the tendency to do this
can now see it....
Quote
The usual way of doing this is by placing a metal strap over the reed blocks to form a mechanical link between the blocks.  Most makers of good quality boxes do this at the factory.
theo very very interesting
 
many thanks this really is a very helpful informative and thoroughly enjoyable forum
 
Logged

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: couple of questions ,reed chamber size and taper
« Reply #13 on: November 08, 2016, 01:54:14 PM »

Quote
To explain Theo's statement about bass reeds, the physics is that bass reeds are more flexible (and weighted) and bigger area than higher-pitched ones (to keep the size reasonable), so when the air pressure in the chamber suddenly changes when the pallet opens they have much more tendency to sink down in the frame and "choke", leading to either slow starting or even worse that horrible "bleurghh" sound. A bigger reed chamber slows the rate at which pressure build up and reduces the tendency to do this.

Aha!  Maybe this is the reason for the filler plates I was wondering about in another thread...
http://forum.melodeon.net/index.php/topic,18672.20.html
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal