Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2 3   Go Down

Author Topic: Castagnari lilly treble side ,for my hohner liliput project  (Read 6297 times)

0 Members and 1 Guest are viewing this topic.

Garry Probert

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 296
Castagnari lilly treble side ,for my hohner liliput project
« on: November 09, 2016, 01:40:52 AM »

Hi guys we had a melodeon afternoon, been playing a few different boxes,hands down my club II is the biggest sound but the Castagnari lilly is an awesome little box ,very concertina like and size wise pretty close to the liliput ........... the Castagnari lilly is a really loud and shrill but in a good way in comparison the the liliput

what give it such punch? is the flat mounted reed blocks or the quality of the reeds?
box construction or a combination, i really like the breathy but quacky single voice sound my wheatstone duet concertinas were beautifully built and for such a small box very impressive but once i played the liliput i was hooked by the big bass

I,d like to get as close as i can to that "sound" on the liliput treble side, I don't think darren will let me rig up some form of adapter to try
lilly treble side on the liliput
many thanks   
Logged

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Castagnari lilly treble side ,for my hohner liliput project
« Reply #1 on: November 09, 2016, 02:04:51 AM »

the Castagnari lilly is a really loud and shrill but in a good way in comparison the the liliput

what give it such punch? is the flat mounted reed blocks or the quality of the reeds?

Both. The reeds are tipo a mano Voci Armoniche (or Antonelli if you have an older Lilly) which are very good quality, responsive reeds. They are flat-mounted which gives a very direct, focussed sound.

Quote
i really like the breathy but quacky single voice sound
Not sure about your description here. The sound should not be breathy. If there is a hiss of air before the note sounds, it sounds as if the reed gaps need adjusting.

If by 'quacky' sound you are hinting at a change in pitch when the note sounds, either (1) you are applying too much bellows pressure, or (2) the reed gap needs adjusting (too narrow?).
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Garry Probert

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 296
Re: Castagnari lilly treble side ,for my hohner liliput project
« Reply #2 on: November 09, 2016, 10:56:14 AM »

sorry was a poor choice of descriptive term considering its a reeds instrument lol its really responsive and driven but with lots of depth for single voice quack was also a poor choice ,bark probably a better description,must get my definitions more accurate my bass player was always complaining about my descriptive terms "too thumpy"etc only work in my head lol

i,ve had a measure up of the lilliput and am thinking of removing the B/D F#/A and the Bf# AD buttons re space the button mechanism and holes ,space the buttons from 17mm to 19 to the 150/151 spread , it would then allow a flat mounted reed block with 16mm reeds theo has a lovely Castagnari prototype 11-10-4 button that was the catalyst for my idea , i,m playing my d/g liliput with the second voice blanked off ,obviously two voices cut through even dry tuned more than a single voice and the hohner reeds are a lovely rounded sound but i,d like a more harsh "choosing my words carefully" treble side   

usually i have a base of reference with guitars banjos fiddles etc but reading posts and the info on the forum i,m starting to realise the melodeon is a very different animal and some of my ideas may actually be counter productive     

I love my c/f liliput and my clubII  so the project d/g is really just a testing ground,i think my near perfect box would be a 2½ row Castagnari lilly 

   "It's the journey, not the destination"         
Logged

Garry Probert

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 296
Re: Castagnari lilly treble side ,for my hohner liliput project
« Reply #3 on: November 09, 2016, 04:05:50 PM »

Hi guys thought i would test a single flat mounted reed along with a standard reed block to get some sort of comparison ,to me its just  reeds in a box and didn't think orientation would make a big difference but i was "totally wrong"lol  it really alters the sound definitely a concertina bark and considerably louder than a two voice liliput the ...single reed is zinc standard size a B .................I then  added a thin rod and spring just between the reed and valve putting downward pressure on the reed but more importantly also in contact with the casing .............. ohh .............. that sound hehe off to build the new reed block     
Logged

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Castagnari lilly treble side ,for my hohner liliput project
« Reply #4 on: November 09, 2016, 05:08:36 PM »

"I then  added a thin rod and spring just between the reed and valve putting downward pressure on the reed but more importantly also in contact with the casing ."

Can you run that past me again? You actually had contact with the reed? wouldn't that stop it sounding altogether?
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Castagnari lilly treble side ,for my hohner liliput project
« Reply #5 on: November 09, 2016, 05:09:13 PM »

An alternative approach is to reduce the width of standard reed plates to the size used in a Liliput.  Then you can avoid the major surgery that would be required  to the Liliput woodwork.  I've done this on a small number of reeds simply by filing the edges of the reed plates.  I had to take .75mm off each side.  I just filed by hand, but It should be possible to use a machine for a larger number or reeds.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Garry Probert

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 296
Re: Castagnari lilly treble side ,for my hohner liliput project
« Reply #6 on: November 09, 2016, 06:10:19 PM »

Hi theo i,ve machined down what seems like hundreds to the liliput 14.5 lol .... i thought the bigger reed plate and additional weight might be a big factor in the punch of the lilly ,the sound with a 16mm reed flat mounted with the spring and pin actually has that slightly metallic overtone ,i will try a cutdown reed next to it to see if its the same
Quote
You actually had contact with the reed? wouldn't that stop it sounding altogether?
sorry in the gap between the reed and valve didn't hear that metallic sound without the brace , i think i,m trying to see what the reed actually needs.... my assumption was the casing was a sort of sound box and the reeds the strings ,but i'm starting to think the reeds require "how can i put this"  rigid housing and airtight" will take on tonal changes from the box but mostly have there own voice, i think i've been underestimating the reeds as just part of the sound of a melodeon     

 
 
Logged

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Castagnari lilly treble side ,for my hohner liliput project
« Reply #7 on: November 09, 2016, 06:44:52 PM »

Pinning the reed down will improve the sound and the volume produced - you're right, they need to be securely held and airtight.  If you've ever tried to play a box in which the reed wax has become brittle (and therefore isn't properly holding and sealing the reeds) you'll experience just how the tone and volume falls off, plus the "bee in a jam jar" buzzes!

Every type of reed has it's own sound, but that will be modified by the accoustics of the box in which they're fitted.  Examples of extreme influences are the flat mounting of reeds and the difference between otherwise similar boxes - one with the fomdo shrouded by the casing and another with the fondo flush with the casing.  Someone here on melnet posted a soundfile of his Castagnari Tommty fitted with new reedblocks loaded with Hohner reeds.  The resultant sound was almost halfway between the two!

My only caution is to take care that your experiments are reversible, at least until you're certain of what you are creating.  Unfortunately every Liliput is irreplaceable...

Rob.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Castagnari lilly treble side ,for my hohner liliput project
« Reply #8 on: November 09, 2016, 06:47:26 PM »

Gary,  I would find your questions easier to answer if you would write in sentences please.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Garry Probert

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 296
Re: Castagnari lilly treble side ,for my hohner liliput project
« Reply #9 on: November 09, 2016, 07:29:04 PM »

Sorry theo will do better   

The trimmed down doesn't quite have the metallic sound, i think the boffins at Castagnari have perfectly optimised for a single voice.
If i blank off the club II the single voice gets lost but the 2 voice wet tuning is a lovely match to the bass.

One could suggest playing quietly on the bass but that dulls the sound and attack ,and too quietly and the big reeds don't really sound.
I experimented with various baffles in my wheatstone duet ,but it basically just dulled the higher frequencies and mismatched the sound

Hi rob the project lilliput has a slightly warped soundboard (I no longer think it's actually a sound board but i don't know what it's called)so that need sorting out, i bought the club II as a project box but it needed virtually nothing doing so i,m afraid the lilliput is my guinea pig.
I think full size reeds ,new sound board, reed blocks and no horrible wax lol screw and gasket get rid of the over the top brass buttons.

I,m new to melodeons but have been restoring and building guitars, banjos for over thirty years ,i have a strong respect for vintage instruments but the liliput was a complete basket case when i first started work on her,but she will be totally playable instrument when finished.     
 
       
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Castagnari lilly treble side ,for my hohner liliput project
« Reply #10 on: November 09, 2016, 07:33:51 PM »

The trimmed down doesn't quite have the metallic sound, i think the boffins at Castagnari have perfectly optimised for a single voice.
If i blank off the club II the single voice gets lost but the 2 voice wet tuning is a lovely match to the bass.

The Lily sound is not just due to being single reed, the reeds are also flat mounted which is significantly different to just blanking off a bank or reeds in a 'normal' reed block melodeon.

The flat mounting is the main reason the Hohner Preciosa is significantly louder/brighter than the more or less same sized Liliput

Garry Probert

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 296
Re: Castagnari lilly treble side ,for my hohner liliput project
« Reply #11 on: November 09, 2016, 10:06:07 PM »

Hi
Quote
The flat mounting is the main reason the Hohner Preciosa is significantly louder/brighter than the more or less same sized Liliput
are the reeds in the preciosa 16mm or the smaller 14.5mm like the liliput ones?

I've literally been scratching my head so over this, milling the reeds would be as "theo said" the easiest option,but I just flat mounted three different manufactured reeds ,single zinc liliput reed, vintage italian PA 16mm zinc reed ,and a cheap and cheerful bontempi accordion aluminium one that is strangely also 14.5 mm,big difference in reed length width and i was careful to get them to speak as quickly as my skills will allow ,all Bb same octave.

On my tuning table you can clearly hear the difference but in the box it seem to really exaggerate the differences ,even with my untrained ear the 16mm reed has a depth and ringy sound and the bontempi accordion one is quite frankly sounds shrill and awful .The lilliput is nice ,not really quiet but thin in comparison, and disappears with the bass

Darrens coming round at the weekend will have a peek in the Castagnari ,can't seem to find any internal pictures on the net

https://www.youtube.com/watch?v=F9nGyPz9uT0

Perhaps its got a secret mouse organ inside lol
     
 
     
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Castagnari lilly treble side ,for my hohner liliput project
« Reply #12 on: November 09, 2016, 10:41:34 PM »

Hi
Quote
The flat mounting is the main reason the Hohner Preciosa is significantly louder/brighter than the more or less same sized Liliput
are the reeds in the preciosa 16mm or the smaller 14.5mm like the liliput ones? 

They are the same size as the Liliput reeds

Garry Probert

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 296
Re: Castagnari lilly treble side ,for my hohner liliput project
« Reply #13 on: November 09, 2016, 11:26:47 PM »

Hi lester thanks for the info ,as a single voice the liliput reed is lost with the bass,it's amazing how just little more in volume and depth cuts through.
I,m using decent quality zinc italian reeds as comparison ,but the reeds in the Castagnari are probably even more punchy

With the reeds mounted on the board waxed in all round and held down, the speed and response of the reeds and the whole box feels so different not unlike his lilly"airtight" I'm looking forward to a little look inside his lilly.
I didn't want to order a quality set of reeds, or do anything not reversible until I had collated all the information i could find and decided what i actually wanted 

many thanks guys for all the help "onwards and upwards"     


     
Logged

diatonix

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 622
Re: Castagnari lilly treble side ,for my hohner liliput project
« Reply #14 on: November 10, 2016, 08:08:55 AM »

Hi Garry and welcome to the forum! Just a little friendly suggestion: Quite a few of us, including me, only have English as a second or third language. Some of us rely on Google translate. We'd appreciate it very much if you please could put your (very interesting!) thoughts into shorter and more easily comprehensible sentences using proper punctuation. Thanks a lot!

« Last Edit: November 10, 2016, 08:49:47 AM by diatonix »
Logged

Garry Probert

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 296
Re: Castagnari lilly treble side ,for my hohner liliput project
« Reply #15 on: November 10, 2016, 12:22:23 PM »

Hi sorry i have L type dyslexia so its a rather laborious task just posting so i can actually understand it lol I have to sort of re read everything and I write as it tumbles from my head ,everything for me like image fragments 

On the upside my test revealed a high memory visual recall so I can remember run lists from 20 odd years ago,sometimes we all get together for a jam and while there fumbling with music i can just see the chord progressions.

I need to rethink my idea of a pictorial account of my soon to start (very excited) refurbishment of the liliput ,accompanied with written descriptions, as will probably read as gibberish with pictures lol
     
 
 
Logged

911377brian

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1518
Re: Castagnari lilly treble side ,for my hohner liliput project
« Reply #16 on: November 10, 2016, 01:08:06 PM »

Garry, you have my sympathy, my son has the same problem, some of the mail he sends me takes a morning to interpret.....
Logged

playandteach

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3526
  • Currently a music teacher in a high school.
Re: Castagnari lilly treble side ,for my hohner liliput project
« Reply #17 on: November 10, 2016, 01:28:53 PM »

I'm sure the requests for tidier grammar and punctuation were given with good heart, as people clearly enjoy reading about your skilful adventures, and just wanted to have as clear as possible an account. I'd be delighted to know that people were paying as close attention to my posts.
Please don't be put off posting.
Logged
Serafini R2D2 GC, Serafini GC accs 18 bass

911377brian

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1518
Re: Castagnari lilly treble side ,for my hohner liliput project
« Reply #18 on: November 10, 2016, 02:21:36 PM »

Garry, I should add that my lad is a lot smarter than me in almost every other respect.
Logged

Garry Probert

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 296
Re: Castagnari lilly treble side ,for my hohner liliput project
« Reply #19 on: November 10, 2016, 06:12:47 PM »

Hi brian i,m sure you're aware it doesn't just manifest itself in simple reading writing confusion .

I appear to other people (including the better half lol )overly focused obsessive and totally dismissive of what I don't perceive as having any tangible value ,and spend quite a lot of my life laughing hysterically at what i deem, the frippery and trivia of the "normal" people lol

I,m not in any way offended by the scathing possibly libelous remarks aimed at my literary prowess ,in fact quite the opposite as my thoughts were instantly transported to.............

Did you hear the one about the non english speaking man ,trying to teach grammar to the english dyslexic

(punchline) lol 

 
   

Logged
Pages: [1] 2 3   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal