Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2] 3   Go Down

Author Topic: Castagnari lilly treble side ,for my hohner liliput project  (Read 6290 times)

0 Members and 1 Guest are viewing this topic.

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Castagnari lilly treble side ,for my hohner liliput project
« Reply #20 on: November 10, 2016, 06:36:29 PM »


In case it helps, I have a few piccies of a Lilly on Photobucket...

http://i780.photobucket.com/albums/yy87/rob2hook/Castagnari%20Lilly/Picture007.jpg

I had hoped to find some internal piccies of the Preciosa (a most ingenious design concept, though not exactly robust), but can't find them just at the moment.  The treble reeds on the Preciosa are flat mounted, but to make sufficient room there are two pans fed by the outer air holes then a pan mounted above them fed from the inner holes.  Much easier to understand from a photo, I can assure you!  In effect you have a double deck of reeds.

Rob.

P.S.  I really like the brass buttons.
Logged

folkloristmark

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 583
    • street entertainers
Re: Castagnari lilly treble side ,for my hohner liliput project
« Reply #21 on: November 10, 2016, 09:03:07 PM »

Hi Garry as my winter project finished I have opened my Precosia for you.Mike GD conversion , hope I dont loose the pins.I need the photo editing practice, I am following your thread as I have other pic and have been thinking of doing as you are to it but it never gets done. This has plate reeds and no one will tune it. I love the liliputs and have been colleting for quite a while keep posting .
kind regards
Logged
Mark Taylor
Folkloristmark

folkloristmark

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 583
    • street entertainers
Re: Castagnari lilly treble side ,for my hohner liliput project
« Reply #22 on: November 10, 2016, 09:12:37 PM »

Gary having re read the thread. they did do a two row no half row button liliput, they kept the same holes but just left the reeds out. I have a couple one I got cheap because the seller said some reeds were missing and i did not realise it was a two row untill it came.So you should be able to just drop the incidetal buttons and lay flat still is there enought room if single voice. thats what i was thinking of for the Tosca.
Logged
Mark Taylor
Folkloristmark

Garry Probert

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 296
Re: Castagnari lilly treble side ,for my hohner liliput project
« Reply #23 on: November 10, 2016, 09:33:58 PM »

Hi Rob brilliant, many thanks a picture says a thousand words,didn't realise they are actually mounted directly onto the board.
I love the sound that wonderful metallic overtone my wheatstone duet had it but nothing like the lilly.

I'm definitely going single voice,and i have a set of trimmed pa and the liliput reeds tuned d/g the bass is done.
Respacing the button mechanism will mean dropping 2 buttons both ends,and with a 2mm gap between the reeds on 4mm uprights for the 16mm

I think maybe with theo,s skills voicing reeds he could get the most out of the 14.5mm ones ,I have already made a flat mounted reed block so tomorrow i,m going to try it, if its not right ,i,ll make up a back mount plate for the button mechanism i,m very keen on screws and gaskets
The wax is a pain i,ve been doing so much think i,m actually getting the hang of it and finally not burning my fingers on the hot feeler gauge between the reeds works very well to seal   
Quote
Hi Garry as my winter project finished I have opened my Precosia for you.Mike GD conversion , hope I dont loose the pins.I need the photo editing practice, I am following your thread as I have other pic and have been thinking of doing as you are to it but it never gets done. This has plate reeds and no one will tune it. I love the liliputs and have been colleting for quite a while keep posting .
kind regards
pictures would be great many thanks
 
 
 
Logged

Garry Probert

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 296
Re: Castagnari lilly treble side ,for my hohner liliput project
« Reply #24 on: November 10, 2016, 09:35:28 PM »

The pictures have just appeared
lovely
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Castagnari lilly treble side ,for my hohner liliput project
« Reply #25 on: November 10, 2016, 09:44:31 PM »


I think maybe with theo,s skills voicing reeds he could get the most out of the 14.5mm


Don't count on it.

The width of the plate is not the only difference. Liliput reed tongues are much shorter and thinner than full size reeds and all 1930s Hohner reeds have a softer sound than Post-war Hohner reeds, and modern Italian reeds are different again.  My hunch is that the design of the reed tonge has much more to do with the sound quality than the width of the reed plate.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Garry Probert

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 296
Re: Castagnari lilly treble side ,for my hohner liliput project
« Reply #26 on: November 10, 2016, 10:34:26 PM »

Hi theo thats very interesting,the Bb vintage accordion reed definitely has that nice metallic ring, judging by the design the hohner chaps were very very good at calculating the relationship between reeds air required and matching bass to treble side ,having now seen inside a
Castagnari lily must be an absolute sod to tune .but mounting directly onto the soundboard would negate the need to flatten the slight curve i can  just slide a feeler gauge

One thing i have learned "no gap"  i mounted the single reeds mid box next to a standard reed block the drop in volume and the breathy reed on the standard was very obvious, the single reeds were waxed directly onto the board  and the pallets seem fine and tight ,its rather strange obviously shrunk slightly on the inside layer of ply not uniformed front and back might have been a slight void in the manufacture.

Quote
My hunch is that the design of the reed tonge has much more to do with the sound quality than the width of the reed plate.
I will try the cut down set tomorrow but I think i need to stop comparing apples with oranges and order a decent set of reeds
 
 
Logged

Garry Probert

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 296
Re: Castagnari lilly treble side ,for my hohner liliput project
« Reply #27 on: November 11, 2016, 12:46:04 AM »

Hi Theo been looking at the Castagnari lilly pictures i have the external measurements what a nightmare it must be to tune ,i.ve been practicing with my hook turn lift tecnieque but to do it inside the box !
i,m laboriously fine tuning by assembling measure flat/sharp mark on my layout paper printouts open up tune on reed blocks reassemble and then finally tune to the adjacent reed
I suppose at least with single voice it's easier so do the two voice Castagnari,s also have flat mounted reeds?
thanks

     
Logged

folkloristmark

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 583
    • street entertainers
Re: Castagnari lilly treble side ,for my hohner liliput project
« Reply #28 on: November 11, 2016, 09:45:41 AM »

Any interesting article by one of our members, Squeezy I think,on concertina.net on making a concertina reed out of a hohner reed. If you want a concertina sound could you do this and flat mount into slots on a face board? Need some time ,did squeezy ever do more than one?   he seemed  enthusiastic.You can buy concertina style reeds . Is not the sound you want caused by flat mounted single voice reeds rather than any particular make of melodeon.I have a homewood concertina GD quality Italian accordeon reeds flat mounted straight to the board no leather that has that large single sound while I have had Marcus ones that are much sweeter same construction but on leather.
Logged
Mark Taylor
Folkloristmark

Garry Probert

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 296
Re: Castagnari lilly treble side ,for my hohner liliput project
« Reply #29 on: November 11, 2016, 11:59:07 AM »

Hi mark i managed to get "the sound" from an old italian PA reed it was from a huge three voice ,so i have all sorts of different reeds in the same octave long narrow tongues to thick short,the stubby wide are virtually identical to the club II reeds.
 Theo,s
Quote
design of the reed tonge has much more to do with the sound quality than the width of the reed plate
has made me rethink ,it would appear the combination of a bigger surface area reed and mounted directly on the soundboard is what gives it that sound
I think there was probably a lot of experimenting by the super smart hohner people maximising the 2 voice with wet tuning to match the bass and calculating the air to move it. They obviously never thought the liliput  would be so unfortunate as to fall into my hands lol

My only reservation is the aggravation tuning reeds mounted directly onto the soundboard ,i've been to the shop to see if we can make up an aluminium plate with a drop in recess and gasket so i can take them out as one ,similar to a harmonica comb but flat mounted


 
             
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Castagnari lilly treble side ,for my hohner liliput project
« Reply #30 on: November 11, 2016, 12:06:07 PM »

It's perfectly possible to tune flat mounted reeds in situ.  You need the right tools and learn the technique.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Garry Probert

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 296
Re: Castagnari lilly treble side ,for my hohner liliput project
« Reply #31 on: November 11, 2016, 01:57:38 PM »

Quote
It's perfectly possible to tune flat mounted reeds in situ.  You need the right tools and learn the technique.
Hi theo have me different size hooks lifters and a surgical stainless steel scratcher "but" don't have your technique or possibly you patience i,m no longer a young man and cant wait 20 years to perfect it LOL so i,m attempting to circumnavigate
I think i have the basic ingredients. needs to be airtight,no taper ,mounted directly on the board ,standard reed tongue size

Obstacles tuning in the box ,sticky wax .I had considered steaming out the soundboard (i have a mini nozzle neck resets etc)but all that faffing relocating the buttons but i could then draw it back through.
If i mount it on an aluminium sheet i can screw and gasket,i have no idea how it would affect the sound i,m off to the shop at the weekend i have a few favours in the bank,alan is a close friend and rather ingenious engineer i,m hoping he comes up with an idea i have lol cnc a reed block with a recess ,drop in gasket and screw .

I did see a picture on the internet of an aluminium soundboard thing with the reeds on.I just cant find it again and i don't know what kind of free reed it was i think a cajun type instrument 
     
   
Logged

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Castagnari lilly treble side ,for my hohner liliput project
« Reply #32 on: November 13, 2016, 01:18:37 PM »

...so do the two voice Castagnari's also have flat mounted reeds?   

As far as I'm aware, the Lilly is the only Castagnari model which has flat mounted reeds.

Cajun makers often insist that a true Cajun box has two voices on reed blocks and two voices flat mounted.  It seems that gives an extra bite to the tone - my only experience was with a couple of Louisiana boxes against my Castagnari Melodeon (Max) and Hohner HA114.  They definitely had that extra edge!  I just wish my hands were large enough to grip a typical Cajun LH.

Rob.
Logged

Garry Probert

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 296
Re: Castagnari lilly treble side ,for my hohner liliput project
« Reply #33 on: November 13, 2016, 10:35:22 PM »

Hi rob thanks for that
had a very interesting day,milling an aluminum reed block with 2mm cross members and a recess and gasket is not a problem but i was more than a little sceptical about sticking aluminum to plywood (expansion disparities)but you would need a crowbar to separate this resin glue mix they use

Carbon fibre !!! never used it in anyway ,my word light as a feather and super strong was chatting to a chap about moulding a casing it doesn't like holes it seems to weaken the structure so they have little blocks for screwed areas.I have no idea of its acoustic properties but considering my boxes are made from ply ? So i,m holding off the aluminium liliput reed blocks ,as there's a limit on favours lol

I love the big Club II sound but its a beast weightwise standing and playing,the case and zinc reeds must be a big proportion of the overall weight so i'm thinking that might be an interesting route. I,ll drop the reed blocks in and he can draw them.

I have spent a lifetime dismissive what i have considered inferior materials in instrument construction and championed the acoustic virtues of rosewood ,honduran mahogany spruce etc and am looking at a carbon fibre and aluminum box lol

       
 
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Castagnari lilly treble side ,for my hohner liliput project
« Reply #34 on: November 14, 2016, 09:43:10 AM »

I have spent a lifetime dismissive what i have considered inferior materials in instrument construction and championed the acoustic virtues of rosewood ,Honduran mahogany spruce etc and am looking at a carbon fibre and aluminium box lol

I think the consensus here is that the woodwork of the casework/blocks/'soundboard' etc has little if anything to do with the 'acoustic virtues' of a melodeon.

Garry Probert

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 296
Re: Castagnari lilly treble side ,for my hohner liliput project
« Reply #35 on: November 14, 2016, 10:46:42 AM »

Quote
I think the consensus here is that the woodwork of the casework/blocks/'soundboard' etc has little if anything to do with the 'acoustic virtues' of a melodeon.

Hi lester sounds good to me no pun intended, I find myself more and more draw to the club II
Having now played several melodeons you sometimes just get a comfortable feel for an instrument,i thought the buttons too big at first but now i,ve changed the action, sliding between buttons feels just right and the wet two voice is really growing on me.
It feels to me like the right size.

Theo,s info of the reed plate size /tonge ,has worked great fitted the new reed block airtight flat mounted and the treble side of the project liliput is loud and concertina/Castagnari lilly like .I don't know what to call it metallic overtones?

Its Ironic as i,m leaning towards the club II,If only hohner hadn't hidden a brick inside"I still can't find it!"   
Logged

Malcolm Clapp

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1119
  • Loving my Hohner-reeded wet MMM CastaTommy
Re: Castagnari lilly treble side ,for my hohner liliput project
« Reply #36 on: November 14, 2016, 11:35:55 AM »


If only hohner hadn't hidden a brick inside; I still can't find it!   


I think it might be hidden somewhere behind the lead  >:E
Logged
Tuner/repairer, now retired.

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Castagnari lilly treble side ,for my hohner liliput project
« Reply #37 on: November 14, 2016, 11:49:49 AM »

I don't understand the comments about the Club 12 being heavy? I wonder which club model you have?  The one with 4 buttons on the helper row is one of the lightest in its class.  Celluloid versions are a little heavier, and the ones with 7 extra buttons are heavier again.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Garry Probert

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 296
Re: Castagnari lilly treble side ,for my hohner liliput project
« Reply #38 on: November 14, 2016, 01:18:31 PM »

Hi theo

It says club II model 4 helper buttons,my back arthritis precludes sitting for long periods and its actually more comfortable to stand but walk around the house (my playing has the opposite effect to the pied piper on the cats LOL)the liliput seemed the perfect solution super light ,the Castagnari lilly would have been great if it had the helper buttons but i,m learning the club system.

I think the 8lb weight alters my posture just enough to make it uncomfortable playing for any decent length of time,the liliput at half the weight is fine ,darren said "play the liliput then"its perfect advice but ,the club II is a wonderful the honking bass notes really big sound and a joy to play, my duets were really light had a collar strap so could wander aimlessly round the house.

Its as you say ,probably one of the lighter boxes but darren did have a modern hohner black plastic? melodeon he sold it ,but it was a big deep thing ,i,m pretty sure it had 3 rows of buttons and more basses it seemed light weight for its size.

I will ask him what model it was see if i can find out the weight of it.       
 
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Castagnari lilly treble side ,for my hohner liliput project
« Reply #39 on: November 14, 2016, 01:20:32 PM »


Its as you say ,probably one of the lighter boxes but darren did have a modern hohner black plastic? melodeon he sold it ,but it was a big deep thing ,i,m pretty sure it had 3 rows of buttons and more basses it seemed light weight for its size.

I will ask him what model it was see if i can find out the weight of it.       
 

Sounds like a Hohner Corona.   I very much doubt it would be lighter.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning
Pages: 1 [2] 3   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal