Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: Hohner 4 stop repair  (Read 3154 times)

0 Members and 1 Guest are viewing this topic.

folkloristmark

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 583
    • street entertainers
Hohner 4 stop repair
« on: November 09, 2016, 10:53:26 AM »

My winter project has arrive a hohner 4 stop off ebay. Overall better than expected but the main issue is a crack on the front sound board that goes straight through, meaning one whole voice is not working the blocks will need removing and the board replaced or repaired.
My question is the reed blocks are on on piece of wood and are glued straight on to the board. This looks both original and over glued in an attempted at a quick fix. The old glue I can remove . What would be the best way of freeing the bolock off what glue was used and am I right that nothing is hidden as to any small nails also holding the blocks on . I can not see any but they may be hidding. Is just genlte force a help or any tips in applying heat? Should i avoid removing the frame or go for it before the blocks are off.I dont usually ask but could be a problem is I damage the blocks. Many thanks in advance
Logged
Mark Taylor
Folkloristmark

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Hohner 4 stop repair
« Reply #1 on: November 09, 2016, 11:27:30 AM »

Never seeing inside one of these, I could be a million miles off the mark, but that horrible looking glue doesn't look original to me. What a mess!
I'm bound to say that I'm glad you bought it rather than me!!!!
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Hohner 4 stop repair
« Reply #2 on: November 09, 2016, 12:33:54 PM »

If you are lucky the original glue is hide glue and will release with heat and moisture.
The main thing to watch out for in removing the blocks is that there is a lot of very small thin wood components that make up the channels that the register slides are housed in.  These might sustain breakages or warping while removing the blocks so gan canny!
If it was me I would first explore all possibilities for repairing the crack in situ.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

911377brian

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1518
Re: Hohner 4 stop repair
« Reply #3 on: November 09, 2016, 01:06:27 PM »

" the best way of freeing the bolock off...." Above, 1053.                                        ,                 Never had to deal with that problem....  ::)
Logged

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Hohner 4 stop repair
« Reply #4 on: November 09, 2016, 01:17:12 PM »

I've been inside a few of these - nowhere near as many as Theo et al, of course - and I tend to agree with Edward that that doesn't look like hide glue; never seen any that colour. That doesn't necessarily mean that it isn't a natural glue that will release with heat & moisture, but.......     The blue "candle wax" looks interesting, too!

Graham
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Hohner 4 stop repair
« Reply #5 on: November 09, 2016, 01:50:14 PM »

If you are lucky the original glue is hide glue and will release with heat and moisture.
The main thing to watch out for in removing the blocks is that there is a lot of very small thin wood components that make up the channels that the register slides are housed in.  These might sustain breakages or warping while removing the blocks so gan canny!
If it was me I would first explore all possibilities for repairing the crack in situ.

Yes - what Theo said. I would investigate the crack from the other side of the fondo/soundboard/palletboard thingy. Perhaps remove the keyboard and action then, depending on how the crack manifests itself from the outer side, maybe work PVA glue into the crack from that side. Smooth off with a damp rag before it is completely set and then sand smooth if necessary. Take care not to sand a depression though, otherwise the pallets won't fit airtight once reassembled.  :o
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Hohner 4 stop repair
« Reply #6 on: November 09, 2016, 02:31:57 PM »

With glue as a crack filler there is also the risk of gluing the register slides. An epoxy putty might be suitable.

A crack in this position is one of the hardest tasks in melodeons  repair,  don't feel bad if it doesn't work out.

If I had to do a repair like this (and I would usually shy away from it) I would consider another approach.  Take off the end frames and then cut the damaged soundboard away from the reed blocks and finally sand off the parts actually glued onto the blocks.  If the soundboard has to be replaced you have to take the end frame apart to get the new board in.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Hohner 4 stop repair
« Reply #7 on: November 09, 2016, 02:38:34 PM »

Whilst not wishing to hi-jack Mark's thread; can you buy soundboards/fondos ready-made?
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Hohner 4 stop repair
« Reply #8 on: November 09, 2016, 03:02:31 PM »

Mark, if you're put off by the potentil difficulty of this repair, then don't despair!  If the worst comes to the worst and the instrument turns out to be beyond viable restoration, then dismantle it very carefully and you'll have a stock of spares ready for the next 4-stopper that comes your way. Not just the obvious parts like reeds, etc, either - keep EVERYTHING that isn't absolutely beyond redemption; small screws, bits of bodywork - whatever can be salvaged for future use. I've had a couple of Hohners that turned out to be no-hopers, and as a result I have a reasonably sized box (OK, it's a half-case from one of our local wineries!) of hard-to-find vintage bits.

Graham
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

folkloristmark

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 583
    • street entertainers
Re: Hohner 4 stop repair
« Reply #9 on: November 09, 2016, 03:06:27 PM »

hanks we have progressed in much the same way . I have had a closer look from both sides and its bad but not that bad. The blocks both flat woods are good and the leak is not from the blockfaces but from lack of air pallet side when stop is open. I shall follow Theos advice and approach from the outside first. I thing it will glue in place. The rear glue is a soft Uhu type and will remove. I have looked at removining the frame and took the corners off but it is pretty well glued so I will leave that and approach from front. If it dont work then the bellows are good to recoup price paid and some good reeds.I think wood glue rather than hide glue ?.I have tried to remove such blocks on old melodeons before and the wood does tend to splinter beyond hope. I can allways vaneer from the front.A spring compressor looks the business to hold the shape to avoid dip and the reeds are mostley surprisingly good.any thanks. I need to slow down as this is suposed to last all winter. PS I wont dispare if it ends as parts.
Logged
Mark Taylor
Folkloristmark

folkloristmark

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 583
    • street entertainers
Re: Hohner 4 stop repair
« Reply #10 on: November 09, 2016, 03:07:40 PM »

Opps wrong hohner
Logged
Mark Taylor
Folkloristmark

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Hohner 4 stop repair
« Reply #11 on: November 09, 2016, 03:52:33 PM »

With glue as a crack filler there is also the risk of gluing the register slides. ...
Keep working the slides to and fro while the glue sets? A bit like Emmanuel Pariselle recommends on the one-row making courses, when gluing the reed blocks into place?
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

folkloristmark

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 583
    • street entertainers
Re: Hohner 4 stop repair
« Reply #12 on: November 09, 2016, 06:44:27 PM »

Thanks all waiting for glue to dry. Tried to put more pics up but am deafted by the limit and my photo editing skills . Dont want to spent more time doing that than the melodeon. It looks hope full and flat and all functioning at least untill the dreded air is put in the mix.have to find something else for winter.
Logged
Mark Taylor
Folkloristmark

folkloristmark

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 583
    • street entertainers
Re: Hohner 4 stop repair
« Reply #13 on: November 09, 2016, 06:53:13 PM »

Good nite
Logged
Mark Taylor
Folkloristmark

folkloristmark

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 583
    • street entertainers
Re: Hohner 4 stop repair
« Reply #14 on: November 10, 2016, 10:16:30 AM »

ok dry morning
Logged
Mark Taylor
Folkloristmark

folkloristmark

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 583
    • street entertainers
Re: Hohner 4 stop repair
« Reply #15 on: November 10, 2016, 11:56:58 AM »

cosmetics any one got a grill or ideas to finish .Thanks
Logged
Mark Taylor
Folkloristmark

folkloristmark

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 583
    • street entertainers
Re: Hohner 4 stop repair
« Reply #16 on: November 10, 2016, 08:44:45 PM »

I must stop talking to myself. Every note working and close enougth for jazz. I would stay away from tuning these. I assme an expert would pull the inside reeds up for tuning with fine pins on the actual reeds. No way you can get throu the block holes . and no raising of reeds from next door .Most of the reedswere  are good only the really high ones took some persuasion but had to take them out every time thank god no valves. Any way winter over back to blighty for some work. I heard some l changes have happen back home and acroos the pond thank god for melodeons. Supose thats the end of the thread.
Logged
Mark Taylor
Folkloristmark

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Hohner 4 stop repair
« Reply #17 on: November 11, 2016, 12:16:47 AM »

Looking very good, well done. Leave the grille off, they sound better. You could paint the pallets a contrasting colour.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Hohner 4 stop repair
« Reply #18 on: November 11, 2016, 07:57:17 AM »

I must stop talking to myself. Every note working and close enougth for jazz. I would stay away from tuning these. I assme an expert would pull the inside reeds up for tuning with fine pins on the actual reeds. No way you can get throu the block holes . and no raising of reeds from next door .Most of the reedswere  are good only the really high ones took some persuasion but had to take them out every time thank god no valves. Any way winter over back to blighty for some work. I heard some l changes have happen back home and acroos the pond thank god for melodeons. Supose thats the end of the thread.

You *might* be able to get to inside reeds with something like this lifter.

http://www.cgmmusical.co.uk/CGM_Musical_Services/Reed_Tuning_Tools.html#3

It takes a bit of practice but it's how I get to inside reeds, except the really small ones.
Just mind you don't damage the inside valves, otherwise the reed will have to come off.. (:)

folkloristmark

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 583
    • street entertainers
Re: Hohner 4 stop repair
« Reply #19 on: November 11, 2016, 09:32:00 AM »

Yes Rees I thought yellow. I have that tool and lift from adjacent reed but on this you have no hole to enter even with pallets off its impractical. All the reeds are working now its just much more time consuming that with other hohners the blocks are glued on the face and can not be removed and you have pallets and slides in the holes luckily I can wax so they are in and out in and out. It also wont fit the tuning table so a bit of guestimating is involved Looking at them it seems that they were assembled with no wax at the rear seal as you cant really run it down there.Most of the High and some of the low reeds are H reeds so someone has been there before? I put a small bit on the reed before placing it and runing the other three sides.But thankfully only a handfull of reeds were not sounding. Is it a sport to get all the reeds sounding all the time on one of theese.Unlike other hohners this was not biult to be easy why was that? The potential for mess mistakes is much more as its all fiddilly dee. After that its very different with quite short bellows a lot of in and out.Thinking of making a new key board form and old melodeon I have when I get back
Logged
Mark Taylor
Folkloristmark
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal