Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Please help me identify this Oakwood model. Not what I thought it was!!  (Read 3675 times)

0 Members and 1 Guest are viewing this topic.

savantuk

  • A Shropshire lad
  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 401
  • Location - Whitchurch, Shropshire.

Hello again.

My new melodeon, purchased from Dave Mallinson arrived today, and I'm very pleased.  It was specially made for Dave around 20 yeas ago, but he decided not to like it, so it sat unused in it's case, until I bought it a few days ago.  Problem is, he says he remembers very littlea bout it.  John Turner remembers it being made for Mally but not in detail.  Superficially, it resembles a model 3, ie 21 buttons, and Dave said it was two voice box.

Unpacking it for the first time, and fitting straps, the first thing I noticed is that it seemed a little big for the model 2 I remembered.  The second was that it had a stop which removed the 3rds from the 4th set of bass reeds.  Not a feature of the 2 which had only three sets.

I decided to investigate further.  Opening the box, I discovered that there were three sets of reeds on the treble end, in a very odd configuration, as they had been squeezed in on the fondo, and tucked in under the bellows frame, and a lng piece of the bellows frame on the bass end had had to be removed to accommodate the extra set of reeds.  Expertly done, no doubt, so an original factory job, not a mod.

The other slightly odd thing, is that there is no interval whatsoever between the three sets of reeds.  All were completely dry, almost as though there was just a single reeds in there. It's almost as though it was intended that this was to have been a three reed, two stopper, but the work was never done.

Anybody any ideas as to why a box would be set up like this??  It's obviously brand new, plastic still on the bass strap, stickers and tags still fitted, and box completely unmarked.  It's a mystery.

The picture I first saw looked just like a model 3, with no clues to what lay inside.



My pic.  Again, just a vanilla model 3.



First clue, not shown in Mallys's pic, a bass slide.



The Back, nothing here.



The Treble end, with extra set of reeds shoehorned in.



Bass end, with bellows frame cut away to accommodate extra set of treble reeds.

Logged
Regards,

Doug

Castagnari Tommy D/G ~  Castagnari Max in C ~ Irish Dancemaster converted toy in C with Cagnoni reeds

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Please help me identify this Oakwood model. Not what I thought it was!!
« Reply #1 on: November 16, 2016, 09:38:10 PM »

Mally normally plays an old Castagnari Hascy tuned MMM with a light musette swing.
The Oakwood has the same reed setup MMM but dry tuned, normal for some Irish musicians.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

squeezy

  • Quick starter (now lagging behind)
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1317
  • Hohner Cornelia (mixte D/G/o&s)
    • www.johnspiers.co.uk
Re: Please help me identify this Oakwood model. Not what I thought it was!!
« Reply #2 on: November 16, 2016, 09:39:22 PM »

If it was made for Mally then it is likely to be a 3 voice MMM as that is his box of choice - his old Castagnari was definitely tuned that way.  It's odd that they are tuned completely dry ... but maybe that was the idea of what was probably a one-off made specifically for Mally.  I imagine that had he persevered with this that he'd have got it tuned to the same kind of musette eventually.

The model 3 (if I remember correctly!  it's 16 years since I started working for The Music Room - and all Oakwoods were in the catalogue back then) would have been a more normal sized 2 voice box than the model 2 and the model 4 was the 23 button version - but Oakwood isn't a "factory" it's Martyn in a workshop!  So I suspect that it was a one-off 3 voice based around the carcass of one of their larger models and built specifically for Mally who had a close working relationship with The Music Room after he sold the shop business to them.

Anyhow - well done for getting it ... it's good that it will be played now!
Logged
Squeezy

Sometimes wrong, sometimes right ... but always certain!

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: Please help me identify this Oakwood model. Not what I thought it was!!
« Reply #3 on: November 16, 2016, 09:43:58 PM »

A very unusual beast, not only 3 voice MMM (with flat keyboard) but also the casework is solid walnut not veneered ply which is what Martyn was mostly using at the time.

Mine was the first Model 4 with 23 buttons, extra bass reeds on bigger blocks, and various ergonomic adjustments I suggested -- can't remember what year but Martyn gave me a big chunk off the price for helping with the design, and liked the result enough to make it as a standard model, otherwise it would have remained a one-off like Mally's...
« Last Edit: November 16, 2016, 09:49:21 PM by IanD »
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Please help me identify this Oakwood model. Not what I thought it was!!
« Reply #4 on: November 16, 2016, 10:14:14 PM »

The cutaway bellows frame to clear the reeds is a very common feature.  Mory for example has it and I think most compact 3 voice boxes like Tommy will have it.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: Please help me identify this Oakwood model. Not what I thought it was!!
« Reply #5 on: November 16, 2016, 10:17:30 PM »

The cutaway bellows frame to clear the reeds is a very common feature.  Mory for example has it and I think most compact 3 voice boxes like Tommy will have it.
My Tommy's get bits cut out in all sorts of odd places, but then it's *very full* -- being G/C maybe means the reed blocks are bigger and even harder to fit in...
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

savantuk

  • A Shropshire lad
  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 401
  • Location - Whitchurch, Shropshire.
Re: Please help me identify this Oakwood model. Not what I thought it was!!
« Reply #6 on: November 16, 2016, 11:15:51 PM »

Thanks for the helpful replies, so definitely not a production model then, a proper 'one off'.
Logged
Regards,

Doug

Castagnari Tommy D/G ~  Castagnari Max in C ~ Irish Dancemaster converted toy in C with Cagnoni reeds

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Please help me identify this Oakwood model. Not what I thought it was!!
« Reply #7 on: November 17, 2016, 01:44:28 PM »

The cutaway bellows frame to clear the reeds is a very common feature.  Mory for example has it and I think most compact 3 voice boxes like Tommy will have it.
My Tommy's get bits cut out in all sorts of odd places, but then it's *very full* -- being G/C maybe means the reed blocks are bigger and even harder to fit in...

Most makers use the same size reed blocks for all pitches.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Jon Loomes

  • Performer, Recording Engineer, Luthier.
  • Regular debater
  • ***
  • Offline Offline
  • Posts: 115
  • Non plaudite. Pecuniam jacite.
    • www.jonloomes.com
Re: Please help me identify this Oakwood model. Not what I thought it was!!
« Reply #8 on: November 22, 2016, 12:22:20 AM »

As far as I know, Mally had this instrument as part of the deal when Martyn bought the shop. It is actually one that Martyn made rather than the ones he outsourced. The fact that it's never been played is a little worrying. I played it once a couple of years ago and it seemed rather slow and unresponsive to me. I never opened it up though, so it must have been just after I left.  Looking at the photos the fact that the reed blocks are too close together and wedged up one side will have a lot to do with the response time. He's clearly adapted a 2 voice soundboard rather than cutting a new one with the blocks in the right place, which would also necessitate rethinking the pallets.  The dry tuning will be because the reeds were put in straight from the factory with no attempt at tuning work done. Get it swung out a bit, sort the reed gaps while you're at it and it might be alright. Personally, I'd be inclined to take that extra reed block out. Good luck.

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Please help me identify this Oakwood model. Not what I thought it was!!
« Reply #9 on: November 22, 2016, 11:18:47 AM »

My Oakwood Model 7 LMM has the same arrangement. It plays really well.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

squeezy

  • Quick starter (now lagging behind)
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1317
  • Hohner Cornelia (mixte D/G/o&s)
    • www.johnspiers.co.uk
Re: Please help me identify this Oakwood model. Not what I thought it was!!
« Reply #10 on: November 22, 2016, 01:04:11 PM »

Mine did too.  I think the plan was to increase the directness of sound by having the reeds as far from the potentially muffling effect of the keyboard assembly ... And it worked!
Logged
Squeezy

Sometimes wrong, sometimes right ... but always certain!

theSmoiler

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 309
Re: Please help me identify this Oakwood model. Not what I thought it was!!
« Reply #11 on: December 08, 2016, 03:25:27 PM »

(if I remember correctly!  it's 16 years since I started working for The Music Room - and all Oakwoods were in the catalogue back then)

Apart from the red one you sold to me, 16 years ago at Sidmouth  ;)

Diane
Logged

squeezy

  • Quick starter (now lagging behind)
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1317
  • Hohner Cornelia (mixte D/G/o&s)
    • www.johnspiers.co.uk
Re: Please help me identify this Oakwood model. Not what I thought it was!!
« Reply #12 on: December 09, 2016, 12:36:40 AM »

That box has come in to conversation recently ... I have an inkling that it is about to be instrumental in my next melodeon with it's open pallets.
Logged
Squeezy

Sometimes wrong, sometimes right ... but always certain!
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal