Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Hohner treble button rotates but won't unscrew  (Read 1568 times)

0 Members and 1 Guest are viewing this topic.

squeezecat

  • Member
  • *
  • Offline Offline
  • Posts: 17
Hohner treble button rotates but won't unscrew
« on: November 24, 2016, 10:20:47 AM »

hi all

Yesterday I noticed one of the treble buttons on my Morgane had come loose, so i tried to tighten it but it just rotates freely in position and won't tighten or loosen.

I think that the screw shaft has screwed in and then come loose from the button cap, so rotating the button doesn't screw/unscrew the shaft. it's stuck in the housing, but also loose enough to be more-than-moderately annoying while playing. Not being able to remove the button also means the fingerboard is stuck on, making it quite difficult to get at the button and the mechanism.

The same thing happened a while ago with another button, but i was able to get that one off by applying some gentle upwards pressure while unscrewing. This time it won't work though.

The only idea I have left is just to obliterate the cap of the button with grips or similar, so that i can get at the screw shaft and hopefully unscrew it without damaging the housing and mechanism. The button is already broken anyway... Before I do that, does anyone have any ingenious ideas?

Thanks a bunch in advance.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Hohner treble button rotates but won't unscrew
« Reply #1 on: November 24, 2016, 10:22:27 AM »


The only idea I have left is just to obliterate the cap of the button with grips or similar, so that i can get at the screw shaft and hopefully unscrew it without damaging the housing and mechanism. The button is already broken anyway... Before I do that, does anyone have any ingenious ideas?


Thats the way to do it.  Have a spare handy before you start!
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

squeezecat

  • Member
  • *
  • Offline Offline
  • Posts: 17
Re: Hohner treble button rotates but won't unscrew
« Reply #2 on: November 24, 2016, 10:27:13 AM »

Wow, fast response! Thank you Theo.

And yes, I have plenty of spare buttons in the higher octaves which I never play  ;D

Logged

squeezecat

  • Member
  • *
  • Offline Offline
  • Posts: 17
Re: Hohner treble button rotates but won't unscrew
« Reply #3 on: November 24, 2016, 10:51:11 AM »

Job done, thanks again!
Logged

Chris Brimley

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2038
Re: Hohner treble button rotates but won't unscrew
« Reply #4 on: November 24, 2016, 10:54:56 AM »

On a related subject, when a button keeps unscrewing, and then starts clacking, what do you good experts recommend, loctite, evostik, a sliver of match wood, or what?
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Hohner treble button rotates but won't unscrew
« Reply #5 on: November 24, 2016, 10:59:48 AM »

It depends why it is clacking.  It can be that the screw hole in the lever is enlarged, it can also mean that the button head has come loose from the screw as in the original question. It could also be the felt washer under the button is worn.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Chris Brimley

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2038
Re: Hohner treble button rotates but won't unscrew
« Reply #6 on: November 24, 2016, 11:12:23 AM »

Actually, Theo, I think you may well know the very buttons I'm asking about - one or two keep coming unscrewed, though they still seem to have plenty of bite onto the screw hole. If tightened, that temporarily removes the clacking, so I think the felts are OK, it's just that the button is raised when it's worked loose.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Hohner treble button rotates but won't unscrew
« Reply #7 on: November 24, 2016, 11:17:00 AM »

It sounds like the screw hole is a bit enlarged.  My usual first cure is to take the button out, check the screw is securely fixed to the button, then apply a drop of superglue to the screw then screw it back in place.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Chris Brimley

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2038
Re: Hohner treble button rotates but won't unscrew
« Reply #8 on: November 24, 2016, 12:01:51 PM »

Superglue it is then, Theo - I just wondered if you guys would advise not to use something like that, because it would be too difficult to remove in future.  Just a little drop on the screw end, or what?  And will it go off before it's screwed in?
Logged

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Hohner treble button rotates but won't unscrew
« Reply #9 on: November 24, 2016, 12:16:46 PM »

Superglue it is then, Theo - I just wondered if you guys would advise not to use something like that, because it would be too difficult to remove in future.  Just a little drop on the screw end, or what?  And will it go off before it's screwed in?

Just a drop on the screw end is fine and it will stay moist enough while you screw the button back in. The glue will hold the screw firmly enough to prevent inadvertent unscrewing, but not so strongly that it cannot be removed in the future if necessary.

Another superglue tip - if the hole which the screw goes into has become somewhat enlarged, put a drop of superglue on the end of a pin and introduce it into the hole so that the glue lines the side of the hole. This narrows the diameter slightly. Wait until the glue has gone off and then screw the button back in - it should hold more firmly. Repeat if necessary.  For really enlarged holes, poke a bit of wood dust into the hole first followed by a drop of superglue.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Chris Brimley

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2038
Re: Hohner treble button rotates but won't unscrew
« Reply #10 on: November 24, 2016, 12:18:19 PM »

Cheers. Steve and Theo.
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal