Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2 3   Go Down

Author Topic: bellows sizes  (Read 10259 times)

0 Members and 1 Guest are viewing this topic.

Garry Probert

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 296
bellows sizes
« on: November 27, 2016, 08:53:12 PM »

Hi guys in the hohner range of vintage melodeons is there generic bellows size,leaving out the compact liliput etc 
my club II is 11"x 6" inches but are bellows measured outside edge? and also are bellows interchangeable between models?
any info would be much appreciated


 
Logged

Henry Piper

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 368
Re: bellows sizes
« Reply #1 on: November 28, 2016, 06:57:54 PM »

Yes Gary,  11" X 6"  is standard  for the  pokerwork and modern Erica's and similar Hohner models, Some vintage Club models are larger, as are many P.A bellows. all Hohner bellows of the same dimensions should be interchangeable, although I have found in practice some very slight variations in end frame measurements presumably due to differing manufacturing tolerances, the only practical difference is that the single row models normally have less folds than the Erica/Pokerwork ranges. Also the more modern bellows appear to be made of somewhat thinner cardboard.
As far as I am aware, there is no standard sizing of Bellows between different Manufactures.
Henry.
« Last Edit: December 21, 2016, 09:50:52 PM by Henry Piper »
Logged
From Ottery St Mary Devon. Currently Playing Dino Baffetti BP2 in D/G, Hohner Student 1 P.A conversion  in D/G,  Hohner 3515 Pre-Pokerwork in A/D,   2 row "Beaver Brand" in Bb/Eb, Hohner Pre- Erica in G/C .  Single row permanent 4 voice, 4 bass in C from old Hohner single row and bits of a cheap Cajun box !!,

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: bellows sizes
« Reply #2 on: November 28, 2016, 07:47:59 PM »

Hi guys in the hohner range of vintage melodeons is there generic bellows size,leaving out the compact liliput etc 
my club II is 11"x 6" inches
I make a random celluloid Club II about 15mm wider than a 2915/Pokerwork but on a very quick measure about the same height.
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

Garry Probert

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 296
Re: bellows sizes
« Reply #3 on: November 28, 2016, 10:11:08 PM »

Hi guys excellent many thanks,i,m in a real quandary at the moment but a fun one lol my project B/C lilliputs coming along and i think i,ve acquired a set of decent spare bellows (just waiting on darren lol)with the idea of copying the club II but in a lightweight box plastic hdpe or carbon fibre a bit easier on the old back     
Logged

Dazbo

  • Mods and volunteers
  • Respected Sage
  • ***
  • Offline Offline
  • Posts: 364
  • Danger MAD Here!
    • My YouTube Channel for melodeons, morris and folk in general
Re: bellows sizes
« Reply #4 on: December 12, 2016, 01:11:42 PM »

Aren't most bellows made by speciallist companies? If so I would have thought there would be a fairly consistant size of bellows to match the different sizes of box.
Logged
Ciao Bellow

Darren

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: bellows sizes
« Reply #5 on: December 12, 2016, 01:18:27 PM »

Bellows are made by specialists but to the specification of the box manufacturer.  There is no standardisation of bellows sizes, except when a manufacturer keeps a design constant.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Dazbo

  • Mods and volunteers
  • Respected Sage
  • ***
  • Offline Offline
  • Posts: 364
  • Danger MAD Here!
    • My YouTube Channel for melodeons, morris and folk in general
Re: bellows sizes
« Reply #6 on: December 13, 2016, 01:04:40 PM »

Bellows are made by specialists but to the specification of the box manufacturer.  There is no standardisation of bellows sizes, except when a manufacturer keeps a design constant.

Thanks Theo, I had wondered about this.  I had thought there may be quite a lot of time (and therefore cost) in changing the machines that make the bellows to different sizes but I guess not (either that or the box makers have to live with it)
Logged
Ciao Bellow

Darren

Garry Probert

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 296
Re: bellows sizes
« Reply #7 on: December 13, 2016, 02:06:02 PM »

Hi guys thanks for the info ,with vintage instruments it would seem a good idea to have a spare box just for bellows and parts
as they appear to be the most expensive part to replace 
 
Logged

Henry Piper

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 368
Re: bellows sizes
« Reply #8 on: December 13, 2016, 03:40:45 PM »

Hi guys thanks for the info ,with vintage instruments it would seem a good idea to have a spare box just for bellows and parts
as they appear to be the most expensive part to replace
...

Far cheaper than a set of reeds Gary  !! ;D ;D ;D If your looking for replacement bellows I cant recommend Igor Solinc in Slovenia highly enough. A set of bellows made to your own individual specification using your original end frames will set you back about 130 Euro.s including return postage, and there Good !!!,
Logged
From Ottery St Mary Devon. Currently Playing Dino Baffetti BP2 in D/G, Hohner Student 1 P.A conversion  in D/G,  Hohner 3515 Pre-Pokerwork in A/D,   2 row "Beaver Brand" in Bb/Eb, Hohner Pre- Erica in G/C .  Single row permanent 4 voice, 4 bass in C from old Hohner single row and bits of a cheap Cajun box !!,

Henry Piper

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 368
Re: bellows sizes
« Reply #9 on: December 13, 2016, 07:30:20 PM »



Thanks Theo, I had wondered about this.  I had thought there may be quite a lot of time (and therefore cost) in changing the machines that make the bellows to different sizes but I guess not (either that or the box makers have to live with it)

Bellows are more or less completely made by Hand,....no machine involved !! ;) ;)
Logged
From Ottery St Mary Devon. Currently Playing Dino Baffetti BP2 in D/G, Hohner Student 1 P.A conversion  in D/G,  Hohner 3515 Pre-Pokerwork in A/D,   2 row "Beaver Brand" in Bb/Eb, Hohner Pre- Erica in G/C .  Single row permanent 4 voice, 4 bass in C from old Hohner single row and bits of a cheap Cajun box !!,

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: bellows sizes
« Reply #10 on: December 13, 2016, 09:55:15 PM »



Thanks Theo, I had wondered about this.  I had thought there may be quite a lot of time (and therefore cost) in changing the machines that make the bellows to different sizes but I guess not (either that or the box makers have to live with it)

Bellows are more or less completely made by Hand,....no machine involved !! ;) ;)

Not true, as a visit to the Galassi factory will prove.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Garry Probert

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 296
Re: bellows sizes
« Reply #11 on: December 14, 2016, 12:08:32 AM »

Hi guys i only did a small section to test the project lilliput B/C and as theo wisely pointed out it's a completely different animal and although fun at first ,i think it's going to be impractical for me to play both fingerings.My lilliput bellows are like new and the project ones bellows are also in excellent condition,and as i set up his guitar darren let me have the liliput for £100 so its cheap for spares especily as a set of bellows are more than £100

I,m borrowing a club 23+7 to see the possible advantages over my 21+4 club II before I finally decide on configuration of the lighter box and I can take measurements and see if the button mechanism differs and bellows size etc I think liliputs are wonderful little instruments and a keeper but the big low end thump from the club II is rather addictive so if i can shave off box and reed weight and see just how much of that sound I can retain.

There seems to be a lot of references to zinc being preferable to aluminum ,the liliput chord reeds are aluminium and are considerably lighter and to my untrained ear sound slightly" harsh,brusk ,strident ? but mixing reeds in my less than scientific experimentation in the box ,opposed to the tuning table i can't really hear a difference,but it might be thirty years
standing next to over exuberant drummers lol       
   
Logged

Henry Piper

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 368
Re: bellows sizes
« Reply #12 on: December 14, 2016, 09:28:25 AM »




Bellows are more or less completely made by Hand,....no machine involved !! ;) ;)

Not true, as a visit to the Galassi factory will prove.

Thanks Rees, I was presumably mislead by videos Ive seen where bellows appear to be made by hand, presumably these are from smaller "Boutique" !!   makers rather than bigger enterprises like Galassi's  (:) (:)
H
Logged
From Ottery St Mary Devon. Currently Playing Dino Baffetti BP2 in D/G, Hohner Student 1 P.A conversion  in D/G,  Hohner 3515 Pre-Pokerwork in A/D,   2 row "Beaver Brand" in Bb/Eb, Hohner Pre- Erica in G/C .  Single row permanent 4 voice, 4 bass in C from old Hohner single row and bits of a cheap Cajun box !!,

Garry Probert

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 296
Re: bellows sizes
« Reply #13 on: December 14, 2016, 10:19:45 AM »

Hi guys don't really get this handmade v machine made thing, well made is what i'm after ,there is a sort of implication that something of the maker is somehow imparted into the product. I'm working on a vintage vega banjo at the moment and the craftmanship is excellent and shes in great condition for her age but i would humbly suggest thats due more the air dried seasoned maple.
I see the bellows more akin to banjo heads,so would happily put a new machine or hand made set on without thinking it changes it vintage authenticity     
Logged

911377brian

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1518
Re: bellows sizes
« Reply #14 on: December 14, 2016, 11:19:51 AM »

With you all the way Garry...
Logged

Henry Piper

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 368
Re: bellows sizes
« Reply #15 on: December 14, 2016, 01:03:36 PM »

Hi guys don't really get this handmade v machine made thing, well made is what i'm after ,there is a sort of implication that something of the maker is somehow imparted into the product. I'm working on a vintage vega banjo at the moment and the craftmanship is excellent and shes in great condition for her age but i would humbly suggest thats due more the air dried seasoned maple.
I see the bellows more akin to banjo heads,so would happily put a new machine or hand made set on without thinking it changes it vintage authenticity     
Absolutely true, !! If your renovating an instrument for playing, the important thing is to get it into the best possible condition for playing- if that takes replacing ageing parts with modern, I cant see a problem !!,
 I view the bellows on a melodeon/accordion in the same way, If I've got an instrument with a tatty, worn, leaky, bellows, I see nothing wrong with replacing it with a newly made set, rather than wasting time trying to patch up the old set!!
It may be slightly different if your simply a "collector" of vintage instruments rather than a player, and your aim is to keep an instrument in as original state as possible, rather like a museum exhibit, but a working instrument needs to be reliable, especially if it earns you all or part of your income.
I have replaced  worn, leaky bellows on several of my Old(ish) Hohners with new modern ones, and they perform all the better for it.!!!
Logged
From Ottery St Mary Devon. Currently Playing Dino Baffetti BP2 in D/G, Hohner Student 1 P.A conversion  in D/G,  Hohner 3515 Pre-Pokerwork in A/D,   2 row "Beaver Brand" in Bb/Eb, Hohner Pre- Erica in G/C .  Single row permanent 4 voice, 4 bass in C from old Hohner single row and bits of a cheap Cajun box !!,

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: bellows sizes
« Reply #16 on: December 14, 2016, 03:32:14 PM »


 I view the bellows on a melodeon/accordion in the same way, If I've got an instrument with a tatty, worn, leaky, bellows, I see nothing wrong with replacing it with a newly made set, rather than wasting time trying to patch up the old set!!


I don't think anyone here would disagree with you, Henry, but "new vs old" is not the same debate as "hand vs machine". 

Graham
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

Garry Probert

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 296
Re: bellows sizes
« Reply #17 on: December 14, 2016, 05:18:03 PM »

Quote
"new vs old" is not the same debate as "hand vs machine". 
I think the implication that handmade is in some way superior as a general comment is rather misleading nowadays.
I installed a mi-si pickup on basically a cnc made taylor guitar its a beautifully made and wonderful sounding travel guitar actually shockingly good

Believe me I hate to say this I am a complete vintage nut but the accuracy of modern tooling
thicknessing finishes etc when used with quality materials are hard to argue with, my little collection of all vintage instruments have a history patina that have a great value to me, but is it more about nostalgia and this crazy notion I have that part of the maker and previous owners inhabit them somehow

I still maintain you cant buy a decent nickel plated brass screws lol but having to push my bonneville (lucas electrics) and spending hours stripping carbs on cars "yes" they had character but reliability ! I still maintain modern life is dreadful mobile phones, cold calling its endless but I would happily buy a set of machine made bellows possible in preference to handmade
and i think someone posted on here the best quality reeds of one manufacturer were machine made.

Final tuning on reeds is probably one of the few things that still actually needs that human skill and couldn't be mechanised "or could it"

    http://newatlas.com/gilmore-self-tuning-piano-system/21425/

                 
Logged

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: bellows sizes
« Reply #18 on: December 14, 2016, 06:08:42 PM »

I think the implication that handmade is in some way superior as a general comment is rather misleading nowadays.
           

Again, Garry, I wouldn't necessarily disagree. I've not been in a position to compare, for the sake of argument, a handmade Erica bellows with a machine-made one. I would suspect - and please note I am NOT suggesting this as a matter of fact - that the handmade one would probably have very, VERY slight imperfections and inconsistencies, while the machine-made one would appear faultless. I'm guessing that the comparative performance would be too close to call, and that the only significant difference would be in the price.

Having said that, I am equally sure that there are those who would happily pay over the odds for the cachet of a hand-made product. (For a few years my wife and I made a [meagre, admittedly!] living on the UK craft circuit from selling a 100% handmade product which sold at three times the price of an imported industrially produced equivalent. The performance would have been absolutely comparable but our product had those tiny inconsistencies, and no two examples were ever exactly alike).

Graham

Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

Garry Probert

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 296
Re: bellows sizes
« Reply #19 on: December 14, 2016, 07:32:21 PM »

Hi Graham I agree those little imperfections definitely have a value and just seeing an old pencil line on a brace or a tiny chisel mark still make me smile . I just replaced a jos rogers banjo head (with that great stamp) with a new vellum it pained me to do it lol I just think handmade once had a real bespoke feel and my lack of faith in "shall we say modern business ethics"
Example friends USA made bicycle actually chinese parts assembled in the USA .

But Vintage hohner melodeons are great lots of pencil lines blue stamps and both my liliput cases have little personalised  german messages but am i a dying breed.

I have to find out how much i can reduce the weight of the club II case and reeds (aluminium opposed to zinc )then possibly shrink to say bespoke 10"x 6 bellows that still drive the reeds without losing the big bass side ,the compact superb is 260x155 and appears from what i've read to do just that

 I,m thinking of a bellows and box internal reducer to get some idea how its going to work this is possibly the least scientific thing i've ever tried but I cant think of any other way of trying it out
Logged
Pages: [1] 2 3   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal